Shop All Paddling Gear

The GridLoc MightyMount XL was designed as a robust but economical mount for longer footprint areas. Compatible with all YakAttack track-mounted accessories, this injection molded mount functions similar to a GearTrac, and allows t-bolt accessories to be installed from either end. A simple twist allows quick and easy position adjustment, but a few extra turns are required to remove the accessory, giving the GridLoc MightyMount XL the same gear security features of the original YakAttack MightyMount, with all of the adjustability of our GearTrac. For LockNLoad accessories like the popular Omega or Zooka II Rod Holder, cutouts on the outer edges of the GridLoc MightyMount XL were added to accommodate the TrackTeeth located on the underside of the LockNLoad track mounts to prevent attachments from sliding along the track, adding even more security. The GridLoc MightyMount XL was designed around the GridLoc Mounting platform featured on the BlackPak Pro and replaces the MightyMount XL. The overall lengths will be the same as the original MightyMount XL; 6”, 9”, 12”, but the hole pattern has been updated and is different. The hole spacing on the GridLoc MightyMount XL is 1.5” x 1.5”. A Phillips screwdriver and the included stainless steel screws are required for the installation on the BlackPak Pro. For installations on rotomolded and thermoformed kayaks a 1/8” drill bit will also be needed.

The 1" YakAttack Ball Connector is 2.5" long and is designed to work with the 1" YakAttack Screwball or camera ball. Made from high strength composites and built for harsh marine environments. 1" Ball Connector 2.5" overall length Lifetime warranty Compatible with YakAttack 1" ScrewBall and camera ball Made in the USA Covered by our Built for Life Guarantee

With a streamlined design, high-back flotation and pliable foam in the chest, the NRS Women's Zoya Mesh Back PFD is an ultra comfortable life jacket. 400 denier ripstop nylon fabric construction is guaranteed to protect your jacket from snags and tears throughout the seasons. The high-back flotation accommodates most high-back kayaking seats and the mesh lower provides ventilation on warm days. Supple foam panels in the chest comfortably mold to a woman's bust. Two sleek, zippered pockets offer easy access to the essentials without adding unnecessary bulk to the front of the jacket. Features a lash tab and 3M reflective accents for better visibility in low-light conditions. Six adjustment points for a customizable fit and front-entry zipper for easily slipping the jacket on and off. The Zoya is a Type III, medium profile life jacket delivering 16.5 pounds of flotation and carries the US Coast Guard Certification through Underwriters Laboratories (UL).

Designed for children 50-90 lbs. Suitable for both paddling and swimming Multiple quick-clip buckles adjust to maintain a proper fit Deep cut armholes and low-profile foam for Comfort and ease of movement

The Classic Fox 40 Safety Whistle is the original and still the standard choice for rescue professionals. Sometimes you have to be heard to be rescued. The 3-chamber pealess design has no moving parts to freeze, jam or deteriorate. Easy to blow and cannot be overblown. The harder you blow, the louder the sound. Chambers are designed to self-clear when submerged in water. Sound will be heard up to a mile away. A whistle is vital for signalling above the sound of surf and whitewater. Remember, in most on-the-water situations a sounding device like a whistle is required by the Coast Guard. We recommend against attaching the whistle to the zipper pull on your life jacket. That can result in accidental unzipping.

Scupper Plugs are an essential item for any kayaker who wants to enjoy the benefits of their sit-on-top kayak all year long, enabling more comfortable cold weather paddling or for anyone who just wants a drier ride. These plugs will fit sit-on-top kayaks with a scupper hole diameters from 1" to 1-3/8". Keeps water from entering your sit-on-top kayak through the scupper holes Finger tab extensions allow you to easily pull for quick draining Pre-drilled holes on finger tabs allow plugs to be tethered Tapered design fits scupper holes from 1” to 1 3/8” (2.5cm to 3.5cm) in diameter Diameter of the plug starts at 0.875 in. and increases to 1.5 in. at the top Works with Wilderness Systems, Dagger, Perception and a variety of other sit-on-top kayaks Sold in a package of 4 plugs

Additional safety for any dog that spends time near the water. The NRS Canine Flotation Device gives you peace of mind by providing extra flotation for your best friend. Simple design fits snug and secure without interfering with the dog's normal activities. This dog life jacket comes in multiple sizes to fit your furry friend. Our heaviest 1000-denier Cordura® shell is tough enough to withstand years of canine abuse. Three NRS buckles secure the vest with five total adjustment points at the waist and neck. A grab handle on top of the vest works great for getting your pet back into the boat and for retrieving tired dogs. A rugged leash ring allows you to use the vest as a walking harness or for attaching a strobe light. It has reflective safety tape for extra visibility. A zippered pocket stows your leash or snacks.

These tie-downs come with a Mighty Bolt base. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Perfect as an anchoring point to secure a cooler or other accessory, as well as being a great adjustment point for directing steering cables on the deck of your kayak. Sold in a two-pack. Patent Pending 2 Pack Made of stainless steel Compatible with GearTrac, MightyMounts, and most other factory-installed track systems Made in the USA Covered by our Built for Life Guarantee SKU: AAP-1016

This is the perfect tote for all the small items you want to take with you on your adventures. Patented design to fit nearly every phone along with your protective case, plus store your keys, wallet, jewelry and more in the separate compartment. 2 compartments: phone sleeve and 2L dry bag for your keys, wallet and other small valuables. Durable 250D tarpaulin PVC material Continue to talk, text, take selfies, play games and surf the web with your device inside. Phone compartment fits iPhone 12 PRO/11/X/8/7/6/5/4, iPod and other devices with most protective cases up to 7" H x 3.5" W x .5"D Includes 3 carry options: adjustable shoulder strap, handle and belt loop

Born on the river, ready for whatever. First sold in 1978 as a better way to tie down gear and frames on whitewater rafts, the NRS 1" Heavy Duty Strap is known the world over for its incredible strength and versatility. The ultimate DIY tie-down solution, every boater, outdoorsperson and homeowner should own an assortment of sizes. Unlike clunky ratchet straps and cheap imitations the NRS Strap is strong, easy, fast and simple with unlimited usefulness. UV-protected polypropylene webbing won't stretch when wet and delivers an impressive Minimum Breaking Strength (MBS) of 1,500 lbs. Custom cam buckle features dual stainless-steel springs for a strong, even bite that won't slip, ever. The strap size is prominently indicated on the buckle so there's never any guesswork. Iconic Blue straps keep with the traditional design with the strap size woven into the webbing. A woven name tag near the buckle lets you reclaim your straps from friends who borrow but don't return. Hidden bottle opener on the buckle aids one of the most popular "strap hacks." All sizes sold in pairs.

Secure your kayak fishing gear without bulky leashes or floats using the YakAttack Track Mount Retractor. This super versatile unit combines the innovation you've come to expect from YakAttack and genuine T-Reign retracting mechanism, 36" Kevlar cord, and a removable 4" tether. Designed for track mounting, this kit comes complete with everything you need, and is compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). GearTrac not included. UV Resistant High Density Polyethylene 36" Kevlar Cord Removable 4" tether Patent Pending Made in the USA Covered by our Built for Life Guarantee SKU: RET-1002

The revolutionary forearm grip featured on the Leverage Landing Net offers unparalleled stability and control, while the hinged design allows the handle to fold alongside the net for compact and easy stowage which make the Leverage Landing Net the best net when kayak fishing. The high level of control and accuracy offered by the forearm grip means you don't need a giant hoop to net your next big fish and makes the Leverage Landing Net an essential piece of kayak fishing gear. This Leverage Landing Net has a wider, more traditionally designed hoop. Revolutionary Forearm Grip Folds for Easy Storage Full Rubber Net Wider, more traditionally designed hoop 20" X 21" Hoop 47'' Overall Length Leverage Landing Net is a registered trademark of YakAttack, LLC Netting is molded in Taiwan All other components are made and assembled in the USA Covered by our Built for Life Guarantee SKU: LLN202148

The Boonedox T-Bone adds 4 feet of extension to the back of your truck and provides a stable point to secure your load. For additional protection for your T-Bone or load, optional protective pads are also available for purchase. Crossbar width: 60" Color options: Orange or Lime Material: Aircraft-grade aluminum (won't rust) Extends to add 48" to the end of your truck bed Adjusts 13.25" to 19" from the top of the receiver Curved design prevents damage to your kayaks and canoes Lightweight: 16 lbs. 300 pound capacity

Crib? Check. Car seat? Check. Toddler PFD? Check. When it comes to family outings, we say the more the merrier. The Harmony Infant-Toddler PFD is specifically designed and crafted for infants or children up to 30 lbs. and features face-up foam distribution with a full head support pillow. The jacket offers a crotch strap for security and its pillow features a sturdy grab loop for easy retrieval and rescue. • Specifically designed for children up to 30 lbs • Features face-up foam distribution and a full head support pillow • Has a crotch snap for security • Sturdy grab loop for retrieval and rescue Item #:24697 Approval:USCG Type III Age Group:Kids Gender:Unisex

The 6x winner of ‘Angler Paddle of the Year’ award as voted by consumers in the YakAngler awards, marking it the best paddle in fishing. The Angler Pro is commonly used by Bending Branches team members and competitive anglers for the optimal combination of weight savings and performance for the dollar. Compression molded fiberglass blades are renowned for their weight and longevity. Fiberglass composite blades lay-up save many ounces in a paddle, resulting in an easy paddling stroke and less fatigue at the end of the day. The cross dimensional fiber weave mean the blades have a slight amount of flex and forgiveness to them, so they may wear but tend to hold up well over the long-haul. The blades shape design is renowned for offering a silky-smooth forward stroke with zero tolerance for fluttering, preserving your energy for longer paddling trips. 100% carbon shaft is the lightest material available, so paddling is less fatiguing and more enjoyable on longer trips. The carbon weave is tight and secure, making it one of the strongest options available. The shaft is ovalized where the hands go for more comfort and control, and to limit the chances for blisters. Versa-Lok™ offers 15cm of additional length and infinite feathering options, and does so with an easy to use and understand system that is secure (no disengagement), robust (will hold form for a very long time), and resistant to corrosion (nylon plastic and stainless steel parts). Versa-Lok™ offers longer sizes than the previous generation of paddles, making it ideal for wider or bigger kayaks and the high seat position. 40-inch tape measure on shaft is a sizing guide, allowing you to verify catches on the spot Proudly hand built in Osceola, Wisconsin, USA, by a team of paddlers and outdoor enthusiasts. Product Specs: Shaft Material: 100% Carbon Blade Material: Compression Molded Fiberglass Blade Size: 7.25” x 18” (105 sq. in.) (677.4 sq. cm) Weight: 30 oz. (850 g) Ferrule Angles: Infinite

An alternative to waist-belted PFDs, the low-profile NRS Matik Inflatable PFD resembles a traditional lifevest with the compact convenience of an inflatable. This lightweight self-inflating PFD provides 22.5 lbs. of flotation and only meets U.S. Coast Guard requirements as a Type III life jacket when worn. (See Note below.) The Matik folds compactly into a low-profile horse-collar style jacket to give you on-demand flotation that doesn't get in your way stand-up paddling, fishing or wading. When deflated, the vest secures with a waist buckle and offers one adjustment point for a snug fit. The Matik does not inflate automatically; in the event of a swim, pull the red tab to engage the pressurized CO2, inflating the integrated bladder. Features a zippered pocket with internal tether for keys or a whistle plus a manual backup cord, mouth inflation valve, reflective accents and two attachment points. Includes a 24 gram CO2 cartridge. Replacement CO2 Re-Arming Kits (Item #40100.01) are sold separately. CO2 cartridges are one-time-use only. It's good practice to keep an extra CO2 cartridge on hand to re-arm the PFD after each inflation. Note: An inflatable PFD is certified by the US Coast Guard as a Type V PFD. However, it meets Coast Guard requirements for Type III PFDs when it is worn. In other words, you must be wearing the deflated collar for it to qualify as a required flotation device.

After years of using the standard rod tube on the YakAttack BlackPak, we knew it was time to add our YakAttack flair and design a product that was worthy of the YakAttack name. The TetherTube was modeled after our popular AR Tube Rod Holder and works flawlessly with spinning and casting rods. The angled lead-in at the top of the TetherTube makes it a breeze to insert your rods and helps lock in your casting and spinning reels keeping them aligned and ready. For added security, the integrated but easily removable hook and tether systems ensure your rods stay put if things go wrong. Caged attachment points on both sides of the tube offer multiple hook points, and the oversized hook design is sized to attach directly to the shaft of your fishing rod if desired. The Tether Tube is compatible with the BlackPak Pro but will not work with the classic BlackPak. Made from marine grade polymers, the Tether Tube is built to last and comes with our Built for Life Guarantee. The included hardware kit allows for installs on the BlackPak Pro or applications where a nut and washer are needed. Sold as a two pack Includes the integrated hook and tether Compatible with spinning and casting rods Hardware included Only compatible with the BlackPak Pro, not the classic BlackPak Made from marine grade polymers Made in the USA Covered by our Built for Life Guarantee

There's no sense spending any more time in the parking lot than you have to. The Groovy Landing Gear mounts to the hull and your wheels can stay, stow, or go depending on your needs. It also doesn't require you to flip your kayak to mount or unmount your wheels so that you can fish for fish (and not your gear)! Carries up to 180 lbs Includes everything you need to track mount to your boat: 2 x Groovy Knuckles 2 x Railblaza Wheels 2 x Standard Legs 4 x D-Clips 4 x Aluminum Gussets 1 x Bungee Pack 1 x Track Pack 1 x Spacer Bar Gear grooves for track-mounted accessories PLEASE NOTE: Not all tracks are created equal! Please verify with your kayak manufacturer that your tracks can support the weight.

The Angler Classic gives you all the bells and whistles that our high-end fishing paddles do, at a price any kayak fisherman can afford. The rugged fiberglass-reinforced nylon blades are propelled by a durable fiberglass shaft, giving you the push you need without worrying about durability. Check the length of your catch with the dual tape measure on the shaft (in both inches and centimeters), and get those pesky hooks free again with the hook retrieval system built right into the blade. To customize your angling experience, the Bending Branches Angler Classic is available with either orange or sage green blades. The Angler Classic Plus comes with a versatile telescoping ferrule allowing for infinite feathering angles. If you have multiple boats or an adjustable seat (or if you can’t keep your Angler Classic out of other paddlers’ hands), the telescoping ferrule makes changing the paddle's length a breeze. The Angler Classic Plus is available in adjustable lengths of 230-245cm and 240-255cm. For more info, see https://bendingbranches.com/kayak-paddles/fishing/angler-classic/plus

The Harmony Sea Passage Fiberglass Shaft Take-A-Part Paddle offers moderate-sized asymmetrical blades that work well in everything from placid lakes to rough seas. It is suitable for both high and low angle paddling styles. The Sea Passage is one of Harmony Gear's most popular touring paddles. Works well for high or low angle paddling Versatile recreational and touring design for a wide range of paddling styles 2-piece take-apart construction for easy transport and storage Simple push-button ferrule allows for offset adjustment from 0 to 60 degrees Dihedral blade design reduces flutter for smoother and more efficient strokes Fiberglass shaft with fiberglass-reinforced “polypro” blades for durability Moderate-size asymmetrical blades suitable for placid or rough waters Ferrule made of injection molded plastic 2-piece take-apart paddle Shaft Type: Fiberglass Shaft Color: Black Blade Color: Varies Blade Shape: Asymetrical Blade Material: Fiberglass/Polypropylene Weight: 35 oz / 992.23 g

Voted Product of the Year for Yak Angler's Kayak Anglers Choice Awards for 2016. The YakAttack RotoGrip™ Paddle Holder sheds a new light on the age old problem of paddle management. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Kayak and SUP anglers have lots of options for installing and configuring this handy little gadget. Super low profile at 2.25" tall, the RotoGrip™ Paddle Holder grips the paddle shaft between two soft rollers, securing your paddle quietly and with just the right amount of tension. Sold in single packs. Utilizes the Mighty Bolt to attach to kayak track 2.25" tall GearTrac not included Single pack Patent Pending Made in the USA Covered by our Built for Life Guarantee SKU: GRP-1001

The YakAttack Advanced Rod Tube™, new for 2019, is our take on the classic tube-style rod holder designed for spinning and casting rods and reels. It features a gimbal lock that flips into place to accommodate longer rods as well as multiple attachment points on the bottom side for rod leashes, increasing gear security. Made from marine grade polymers the AR Tube is built to last and comes with our Built for Life Guarantee. The AR Rod Tube is track-mount ready, and features the LockNLoad™ Mounting System. The LockNLoad system offers unrivaled track-mount security, but its also incredibly easy to adjust through its patented pending design. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). The AR Tube attaches to your kayak, boat, or other watercraft with YakAttack’s brand new LockNLoad mounting system, and is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit. There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use: - From locked mode, simply squeeze a lever to go into adjustment mode. - In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you are back in locked mode. - To go to removal mode, flip the lever out, and the system easily slides off of the track mount. This piece of mechanical brilliance is sure to make the LockNLoad the preferred mounting system of kayak anglers for 2018. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). GearTrac not included Made in the USA Covered by our Built for Life Guarantee Patent Pending SKU: RHM-1003

With a single product you can attach the SwitchBlade to either your YakAttack CellBlok, deck mount, or on a track system. We designed the blade to minimize gurgle and resistance, making the SwitchBlade the most efficient transducer arm on the market. The patented arm folds up compactly. No more cumbersome, rigid arm to deal with. And for the angler that really wants to dial it in to fit their boat perfectly, we made the length of the arms customizable and can easily be cut to length to accommodate nearly any kayak on the market. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Unlike other transducer deployment arms of the past the new SwitchBlade Transducer Arm from YakAttack is focused on speed and adjustability. Featuring a hydrodynamic blade design the SwitchBlade causes less water turbulence resulting in a faster and less noisy over-the-side transducer mounting solution. Whether the SwitchBlade Transducer Arm is mounted on top of a YakAttack CellBlok or on the gunwale of your kayak the depth of the transducer is easily adjustable and gives you the ability to get the transducer deep enough for your side scan fish finder. If you don't need the full length of the SwitchBlade simple remove the middle arm and now you have a customized solution. To deploy or retrieve the transducer arm the SwitchBlade features a unique tubular design and multi pivot allowing for easy articulation in and out of the water. In 2018, we launched the LockNLoad™ Mounting System for rod holders and fish finder mounts and we knew we had to find a way to integrate our new mounting system into the SwitchBlade Transducer Deployment Arm. By replacing the included knob used to attach the SwitchBlade base to the track with the the LockNLoad Mounting base it gives you the ability to mount your fish finder and transducer arm in one compact system. Can be attached to YakAttack GearTrac and most other kayak track systems Includes hardware for deck mounting or attachment to the YakAttack CellBlok Lowrance fish finder, transducer, GearTrac, and LockNLoad Mounting System not included Made in the USA Made from premium materials designed for use in harsh marine environments GearTrac not included Overall length of 25.75" U.S. Pat. No 7,971,839 Made in the USA Covered by our Built for Life Guarantee SKU: FFP-1001

Designed to fit dogs of all shapes and sizes, the Pup Float is the perfect choice to keep your paddling pal safe. The Pup-Right chest panel places more flotation under the dog’s chest - this provides a safer swimming position by keeping the dog’s airway clear of the water. Lightweight PE foam and a durable nylon shell keep the vest comfortable as well as easy to clean. The easy to grab handle is perfect for helping your pooch back onto the dock, or into the raft. Features -Fits All Size Dogs : Designed to fit all size dogs. Just measure from the under the front arms around the waist to find the right. -Lift Handle : Easy to grab handle is perfect for helping your pooch back onto the dock, or into the raft. -Positions Head Properly: The Pup-Right chest panel places more flotation under the dog’s chest; this provides a safer swimming position by keeping the dog’s airway clear of the water. -Increased Mobility & Comfort : The smaller profile helps to increase mobility and decreases the risk of chaffing or causing irritating hot spots. Lightweight PE foam, and a durable 400D nylon shell keep the vest comfortable as well as easy to clean. -High Visibility: Multiple reflective accents help keep dogs visible in low-lighting conditions.

The United States of America is where the kayak fishing craze started, and we're proud of that! Our "Fish the USA" tee is a great way to show you are too. 65% polyester/35% ring-spun USA cotton Heat-set fabric to minimize shrinkage

Command the water with the YakAttack CommandStand™! Designed to fit most kayaks with or without a track system, the unique crossbar design allows you to adjust the width of the CommandStand™ for a perfect fit on most kayaks. Assembles with one hex key (included), but the pin-and-tether design means no tools are needed to deploy, lay down, or break down the CommandStand™ for stowing. More than just a stand-assist bar, the CommandStand™ offers all of the features of a standup fishing station! Two RotoGrip Paddle Holders mean your paddle is there when you need it and out of the way when you don’t. Two MightyMount Bar Clamps allow you to attach any YakAttack accessory utilizing a single t-bolt, including rod holders, cup holders, camera mounts and more. Pull 2 pins to lay down on the forward deck of your kayak, and pull 6 pins (4 at the base and 2 at the crossbar) to break the unit down to a tidy bundle, ready to stow in the mesh carrying bag (included). Made in the USA from premium materials for a lifetime of use in even the harshest environments. Anodized Aluminum UV Stable Polymers Coated and Uncoated Stainless Steel Hardware Adjustable Width Can be mounted to tracks or any flat surface All necessary hardware included Includes accessory kit 2 RotoGrip Paddle Holders 2 MightyMount Bar Clamps for attaching accessories Mesh carrying bag with shoulder strap Patent Pending Made in the USA Covered by our Built for Life Guarantee SKU: SAP-1001

Experience true innovation in motion with the Helix PD Pedal Drive. Featuring a 6:1 gear ratio precision-tuned to a 14 x 17 two-bladed fixed pitch prop, the Helix PD is the most efficient and intuitive pedal system ever engineered. Fully deployed, the system is optimized for maximum speed in exchange for less effort so you can be hands-free to fish all day. A groundbreaking auto-raising mast achieves zero draft with a spring-loaded kick pedal, and the unit can be further stowed forward and out of the way to complete the 3-phases of possible positioning. Tuned to the proven performance of Wilderness Systems’ S.M.A.R.T. Hull designs, and compatible with the Recon 120. Optimized for all-day cruising and hands-free performance Three-position pedal drive: fully deployed zero draft fully stowed Versatile kayak steering system: rudder kit steering kit noise reduction baffles

The Harmony Adventure Kayak Paddle Paddle offers moderate-sized asymmetrical blades that work well regardless of paddling style. Its unique dihedral blade shape provides a responsive and flutter-free stroke making it ideal for both beginners and seasoned paddlers. Easy storage due to its two piece Take-Apart (TAP) shaft. Includes Drip rings, an aluminum wedge ferrule, and a unique camo patterned blades. Blade Color: Camo Blade Material: Fiberglass/Polypropylene Blade Shape: Dihedral Shaft Color: Black Shaft Size: Standard Shaft Type: Aluminum Weight: 30 oz

The Backwater Assassin Carbon Fiber Hybrid Paddle is the full-size version of its legendary predecessor, the Assault Hand Paddle. Weighing right at 38 ounces and 42 ounces, respectively, paddle design and technology is again moving forward! The Assassin is available in 2 different adjustable lengths: 230-240cm (90.5-94.5in) & 250-260cm (98.5-102.5). The Assassin kayak paddles not only display the patented “hook and teeth” blade design and raised graphics package, they also provide unsurpassed performance and versatility. The hook is great for grabbing a line in the water, pulling in decoys, pulling you closer to the dock, or making a tree limb easier to reach. The oversized blade helps to pull a lot of water when paddling and makes turning even easier. The Assassin is designed for form as well as function. The unique blade design allows kayakers more freedom, more comfort and more confidence to challenge themselves. The Assassin was designed for both high angle and low angle paddlers. The shaft is made of a carbon hybrid material to help reduce the overall weight and the oversized ABS injected nylon blade is hard enough to push off on any surface and not crack or flex. Is your lure stuck in a tree? No problem, just grab the branch. Too close to the rocks or oyster shells? No problem, just give a push. Available in 230-240cm or 250-260cm adjustable lengths ABS injected nylon blade Hook feature to grab your line, waterfowl decoy, dock, or tree limb Serrated teeth edge can be used to launch yourself off solid surfaces Made of strong, fade resistant plastic Drip rings included Available only in a black shaft and black blade For added length, consider the 35cm Carbon Fiber Paddle Extension

A customized tackle storage solution for the Perception Outlaw kayak Fits perfectly within the midship storage areas located on both sides of the Outlaw seat Also compatible with other model kayaks - see exterior dimensions below to determine fit Bungee loops on the bottom of the Saddle Bag secure the bag tightly to the kayak’s integrated fittings Interior capacity has enough room for two 3600-series Plano boxes The canopy style lid protects the interior from splash and can be secured with one hand by two bungees Additional loops on the exterior are ideal for attaching additional tools Drain holes in the bottom of the bag prevent water from pooling inside Part # 8080068 PRODUCT SPECS: Exterior – waterproof 600D vinyl Interior – 210D nylon liner Exterior Dimensions – 9.5” tall, 4.5” deep, 15” wide Compatible with: Perception Outlaw 11.5