Tubes: All Sizes/Types

- ISO Diameter: 622 / road / 29" - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Length: Schrader - Valve Shaft: Smooth - Weight: 110g (23-25mm), 128g (28-32mm), 144g (35-43mm), 160g (40-45mm)

The least expensive way to ditch 40+ grams of rotating weight is with our Turbo Talc Tubes. A patented, oversized 4.8cm valve base prevents tearing, while a partially threaded valve stem provides a clean interface with pumps. Our lightest and most supple tube offering, it's also been proven in rolling-resistance testing to reduce drag by as much as 13% per wheel. - Packed in talc for easier installation. - 4.8cm valve base prevents issues of valves tearing off. - Smooth at the top for easier pump head insertion and reduced wear on pump internals. - Thinner tube design saves approximately 40 grams of rotating weight. - Thickness: 0.6mm

- Size: 700c x 28 – 32 - ISO Diameter: 622 / road / 29" - ISO Width: 28mm, 29mm, 30mm, 31mm, 32mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 128g (32mm), 129g (48 & 60mm)

- Size: 26 x 1.5 – 1.75 - ISO Diameter: 559 / 26" mtn , 584 / 650b / 27.5" - ISO Width: 33mm, 34mm, 35mm, 36mm, 37mm, 38mm, 39mm, 40mm, 41mm, 42mm, 43mm, 44mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight 152g (32mm), 158g (48mm)

Odyssey's Air Supply tubes are specifically sized to fit modern BMX tires, and they are manufactured with a stronger emphasis on quality versus simply chasing the lowest possible price. On average, the Air Supply BMX tube retains air significantly longer than others currently available on the market. This is down to both the rubber that is used, and because of strict quality control during manufacturing. It is normal to assume that a “tube is a tube,” but a higher-quality tube will always last longer than a cheap tube during comparable everyday use.

- Size: 26 x 2.1 – 2.3 - ISO Diameter: 559 / 26" mtn - ISO Width: 53mm, 54mm, 55mm, 56mm, 57mm, 58mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 202g

Surly Inner Tube to fit a wide range of plus-size and fat bike tires. - Labeled Size: 26 x 3.0 - 4.8 - Weight: 310 g - Valve Core: Removable - Shaft Type: Threaded - ISO Width (mm): 76mm–100mm - Tube Compound: Butyl - ISO Diameter: 559 / 26-inch MTN - Valve: Presta Short 32-40mm

Your little ones have a youthful, intrepid spirit that sees them riding wherever the wind takes them. Most of the time, however, it takes them straight through thorns and debris, leaving you with the unenviable task of changing out flat after flat. But with our Standard Schrader Valve Youth Tubes, you'll have the peace of mind that they're riding on tough tubes that are built strong to last. And to make sure of it, they feature a molded method of construction that ensures a consistent thickness of butyl rubber— meaning that they'll roll smooth and stay tough, ride after ride. - Consistent thickness for the utmost in quality. - 32mm Schrader valve

Minimum weight and maximum protection: Tubo-MTB-Plus tubes are optimized for tire widths from 2.5" to 3.0", today’s standard for E-MTBs. Their low weight of 105g (for 27.5+) increases your battery life, and they're also a lightweight alternative to tubeless setups. - 42mm valve length

One tube to rule them all! Are you riding a mixed wheel size mullet bike? Can't decide to bring a 27.5" or 29" spare? Or do you just want to be a trail hero saving others with your versatile tube that fits both 27.5" and 29"? The new MTN MULLET tube takes the guess work out of which size tube you should pack. At the drop of a hat, this tube is ready to take care of business up front or ride the party in the back. - 40mm Presta Valve - For tire size: 27.5/29x2.3-2.6 58-66x584/622 - Tube weight: 220g

- Valve type: Schrader - Valve core: Removable - Valve stem: Smooth - Butyl rubber - Wall thickness: 0.9mm

- ISO Diameter: 559 / 26" mtn - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 102g (1-1.25), 165g (1.5-1.75), 174g (1.9-2.125), 198g (2.1-2.3), 281g (2.4-2.75)

- Butyl rubber - Removable valve core - Schrader valve - Wall thickness: 0.9mm

- Low Lead Valve - ISO Diameter: 540 / wheelchair - ISO Width (mm): 35mm - Labeled Size: 24 x 1-3/8 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 124g

Our Standard Presta Valve Tubes feature a molded method of construction that ensures a consistent thickness of butyl rubber. This means that they don't have any unnecessary weight and will roll smooth, ride after ride.

Always needed. Quality tested and a great value, the 0.9mm thick butyl rubber innertube strikes the perfect balance between weight and durability. Where it thrives: In the garage, on the bike What it's built for: Durability, Fixing Highlights: - Presta valve with a fixed/non-removable valve core 0.9mm wall thickness - Each tube passes a 24 hour air hold test prior to packaging

We all love to stop and smell the roses, but like they say, every rose has its thorn. And as we all know, there's no better way to ruin a beautiful ride than with a thorn in the tube. No need to worry, though, because we designed our Thorn-Resistant Schrader Valve Tubes to combat pesky pricks of all shapes and sizes. Starting at the basis of the construction, we designed the tube to be thicker at the outer side (the part against the tire) in order to stop pesky bits from puncturing all the way through the tube. Then, at the inner side (the part against the rim), it's actually thinner in order to reduce weight. This way, you don't have to sacrifice performance in the name of protection. - Thicker construction on the outer side (against the tire) enhances puncture protection. - Thinner construction on the inner side (against the rim) maximizes weight savings.

- Butyl rubber - Economy tube - Removable valve core - Wall thickness: 0.9mm

Our Standard Schrader Valve Tubes feature a molded method of construction that ensures a consistent thickness of butyl rubber. This means that they don't have any unnecessary weight and will roll smooth, ride after ride.

- Labeled Size: 26 x 3.5 – 4 - ISO Width: 88mm – 100mm - ISO Diameter: 559 / 26" MTN - Shaft Type: Threaded - Valve: Standard Schrader - Valve Core: Removable - Wall Thickess: 1 - Tube Compound: Butyl - Weight: 500

One tube to rule them all! Are you riding a mixed-wheel size mullet bike? Can’t decide to bring a 27.5” or 29” spare? Or do you just want to be a trail hero saving others with your versatile tube that fits both 27.5” and 29”? The new MTN MULLET tube takes the guesswork out of which size tube you should pack. At the drop of a hat, this tube is ready to take care of business up front or ride the party in the back. - For tire size: 27.5/29x2.3-2.6, 58-66x584/622 - 40mm Presta Valve - Tube weight: 220g

- ISO Diameter: 438 , 451/ 20 x 1-1/8", 20 x 1-1/8" - ISO Width: 28mm, 29mm, 30mm, 31mm, 32mm, 33mm, 34mm - Labeled Size: 20 x 1-1/8 - 1-3/8 - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded - Weight: 98g

- ISO Diameter: 622 / Road / 29" - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Shaft Type: Threaded - Valve Core: Removable

Even lighter, even more compact, and ideal as a spare, the S-Tubo-MTB tubes were developed to have a minimum possible packaging size. With a removable valve stem, the tubes have a size of only Ø3.5cm x 5cm height when packaged. The puncture resistance is the same as with standard butyl rubber tubes but with a weight of only 45g (for 29"). - 42mm valve length

- Low Lead Valve - ISO Diameter: 457 - ISO Width (mm): 44mm - Labeled Size: 22 x 1.75 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 145g

- Low Lead Valve - ISO Diameter: 451/ 20 x 1-1/8", 20 x 1-1/8" - ISO Width (mm): 28mm, 29mm, 30mm, 31mm, 32mm, 33mm, 34mm - Labeled Size: 20 x 1-1/8 - 1-3/8 - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 94g

- Valve: Presta - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm

Challenge's S.C. Seamless Latex Tube is hand made for the highest quality. Latex tubes are usually lighter and roll with less resistance than standard butyl tubes. They also resist punctures. The S.C. fits tires 19 to 28mm wide, and has a 47.5mm-long valve with a removable core. - 60 grams

- ISO Diameter: 406 / 20" BMX - Wall Thickness: 0.9mm - Tube Compound: Butyl - Valve: Standard Schrader - Shaft Type: Smooth - Valve Core: Removable

- Size: 14 x 1.5 – 2.25 - ISO Width: 44 – 55mm - ISO Diameter: 254 / 14" - Wall Thickness: 0.9 - Shaft Type: Smooth - Valve: Standard Schrader - Valve Core: Removable - Tube Compound: Butyl