Parts

Let Dunderbeist loose on your local groomed single track and feel the aggressive tread claw through the snow with unrivaled propulsion and braking traction. Its 4.6-inch footprint provides enhanced flotation and is compatible with a wide range of frames. Dual compound rubber rolls fast and keeps you in control while shredding the berms. Point uphill and feel the Dunderbeist dig in as you attack climbs covered in loose, unconsolidated snow. Pair Dunderbeist with its sibling front tire, Flowbeist, for the ultimate combination of traction and control. - 4.6” footprint - Designed for optimal use as a rear tire - Aggressive side lugs comprised of soft rubber compound - Ideally paired with Flowbeist front tire

Riding in deep, sticky snow just got a whole lot easier. 45NRTH's Helva pedals feature an open CNC-forged body that excels at shedding snow. Its super thin 9mm profile gives you maximum clearance while cornering and riding in deep ruts, plus they're light. Sealed DU bearings keep them spinning smooth and replacement pin kits are available (sold separately) in seven different colors so you can color-coordinate your rig. - Size: 110mm wide x 100mm long x 9mm high - Spindle diameter: 9/16-inch - Weight: 308 grams

- Chromoly steel - CNC fabrication - 1.29" x 24tpi left hand thread

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.

Bolt on Avid's Shorty Brake Pads for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.

Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote (sold separately) for maximum convenience and ease of use.

Our Box Two tier's mission in life is to deliver performance similar to the Box One but without its exotic (and costly) features. With the Single Shift E-Bike Groupset you still get the Tri-Pack™ Clutch in our derailleur only it isn't adjustable. The cassette's 12-50T range is optimized for E-Bikes. The action on the shifter is limited to one downshift per lever swing. The chain boasts the same unique ability to mate with a wide/narrow chainring except you give up the trick DLC top coat. You're hardly shortchanging yourself with Box Two. INCLUDES - Box Two Prime 9 Single Shift Shifter - Box Two Prime 9 X-Wide Rear Derailleur - Box Two Prime 9 12-50T E-Bike Cassette - Box Two Prime 9 126L Chain Nickel - Box One Shift Cable & Housing Kit

Grenade style Schrader Valve caps

- Designed for caliper and U-brakes - Forged alloy lever / 2-piece hinged aluminum bracket - 2 finger - 22.2mm (7/8") clamp - Return spring - 93g each

- Compatible with 1-piece BMX cranks - CNC machined 6061-T6 alloy construction - Teeth: 25T - Material: Alloy - Chain Compatibility: 1/2x 1/8-inch - Tooth Type: Standard

- Versatile tread pattern suitable for a broad range of conditions - Medium-height center knobs are ramped to reduce rolling resistance and are staggered to provide a consistent feel across the profile of the tire - Side knobs are fairly aggressive and provide excellent cornering grip - Available with a wire bead or folding bead with EPS puncture protection

The Rock Hawk is designed as an all-condition trail tire that has an aggressive tread with widely spaced lugs. - Ramped center knobs reduce rolling resistance - Durable 27 TPI casing

The Cult half link chain features teflon coating engraved with cult logos and is designed to help dial in the rear end length on frames with short dropouts. - Rounded side plates are compatible with 8T and larger drivers - Color: Black - Width: 1/2 x 1/8 mm - Drivetrain Speeds: Single Speed - Chain Connection Type: Pressed Pin - Half Link Chain: Yes

Cane Creek's Aheadset is a simple, affordable solution for your headset needs. • Bearing Type: Cup and Cone • Color: Black • Crown Race: 30 • Defined Color: Black • Lower Stack Height: 12 mm • S.H.I.S Lower: EC34 • S.H.I.S Upper: EC34 • S.H.I.S. Stem Clamp Diameter: 28.6-26tpi Quill • Upper Stack Height: 22 mm • Weight: 205 g

Cane Creek's Aheadset is a simple, affordable solution for your headset needs. • Bearing Type: Cup and Cone • Color: Black • Crown Race: 30 • Defined Color: Black • Lower Stack Height: 5 mm • S.H.I.S Lower: ZS44 • S.H.I.S Upper: ZS44 • S.H.I.S. Stem Clamp Diameter: 28.6 • Upper Stack Height: 10 mm • Weight: 130 g

With an ergonomic shape, a universal lock-on compatibility, and a cozy yet durable rubber finish, the Cane Creek Ergo Control Bar Ends offer a great solution for adventure cyclists, e-bike riders, commuters, and mountain bikers who desire more comfort, more control, and more options. - Ergonomic shape and generous rubber grip

Always needed. Quality tested and a great value, the 0.9mm thick butyl rubber innertube strikes the perfect balance between weight and durability. Where it thrives: In the garage, on the bike What it's built for: Durability, Fixing Highlights: - Presta valve with a fixed/non-removable valve core 0.9mm wall thickness - Each tube passes a 24 hour air hold test prior to packaging

More comfort, more control. Lightweight EVA foam and cork combine with a contemporary knurled texture twist – offering a stylish, comfortable, and durable finish to your bike. Where it thrives: The open road, gravel roads What it's built for: Grip, durability Highlights: - Comfortable, lightweight EVA foam absorbs road-buzz and feels great - Natural cork elements and debossed knurled pattern for better grip in all conditions / Includes: 2x tape rolls, lever strips, bar end-plugs, and finishing strips - Thickness: 2.7mm, length: 200cm, weight: 82g

Get a grip. A straight profile, lock-on grip that combines a ribbed, mushroom pattern on the palm side for comfort, and hex-pattern on the underside for grip. Where it thrives: Challenging trails, out in the elements What it's built for: Control, grip Highlights: - Mushroom ribs for comfort and control - Micro-Hex pattern for all-weather grip - Single lock-on clamp for security

More comfort, more control. Superlight and durable, and optimized for vibration absorption using EVA foam and QuellGel Silicone, the perfect all-day handlebar tape. Where it thrives: The open road, out in the elements What it's built for: Comfort, grip Highlights: - Lightweight EVA foam with a 4mm QuellGel silicone layer provides extra comfort and improved grip feel - Non-slip suede-effect finish for control in all conditions, rain or shine / Includes: 2x tape rolls, lever strips, bar end-plugs, and finishing strips - Thickness: 4mm, length: 200cm, weight: 102g

Take a seat. Comfy makes happy, perfect for everyday with a quilted saddle top keeps things plush. Where it thrives: Leisurely rides, in town What it's built for: Comfort, durability Highlights: - Quilted saddle top for comfort and style - Steel rails for strength and durability 170mm width

More comfort, more control. Quality silicone and an engineered foaming process, produces a great feel with unrivaled all-weather grip that can be washed and re-wrapped. Where it thrives: Any road it goes on, out in the elements What it's built for: Grip, durability Highlights: - Silicone and a hexagonal dimpled pattern provide the perfect balance of shock absorption and grip feel - Hardwearing and washable construction results in a long-lasting fresh look / Includes: 2x tape rolls, lever strips, bar end-plugs, and finishing strips - Thickness: 2.7mm, length: 200cm, weight: 165g

Pure comfort. A saddle with a single purpose, comfort. Where it thrives: Leisurely rides, in town What it's built for: Comfort, durability Highlights: - Optimized foam densities - Stable chromoly rails - 188mm width for comfort

Get the DownLow. Our DownLow dropper post is an infinitely adjustable, easily serviceable, air/hydraulic unit with a sweet cable remote. It goes up. It goes down. You need one. Where it thrives: Challenging trails, up and down hills What it's built for: Handling, confidence Highlights: - 31.6 diameter - Alloy construction with slot key bushings and wiper seals - Preset airspring for no-fuss setup

Descend with confidence. 16% more compliant than our competitors, this enduro and gravity focused handlebar that doesn't forget about weight or compliance. Where it thrives: Challenging trails, down hills What it's built for: Stability, control, confidence Highlights: - Carbon fiber construction for compliance and weight savings - 800mm width, 35mm clamp size, 210g - 30mm rise, 8 degree backsweep, 5 degree upsweep

Get the DownLow. Our DownLow dropper post is an infinitely adjustable, easily serviceable, air/hydraulic unit with a sweet cable remote. It goes up. It goes down. You need one. Where it thrives: Challenging trails, up and down hills What it's built for: Handling, confidence Highlights: - 31.6 diameter - Alloy construction with slot key bushings and wiper seals - Preset airspring for no-fuss setup

Challenge's S.C. Seamless Latex Tube is hand made for the highest quality. Latex tubes are usually lighter and roll with less resistance than standard butyl tubes. They also resist punctures. The S.C. fits tires 19 to 28mm wide, and has a 47.5mm-long valve with a removable core. - 60 grams

- Cloud 9 seat cover featuring comfortable memory foam - Adds a layer of protection and comfort to MTB or cruiser saddles

- Multi-stage foam for extended comfort - Anatomic relief takes pressure off the perineal nerve - Integrated light bar for increased safety day or night - Dimensions: 10 x 8-inch

Choose Cloud 9's Comfort Select Seat and you'll get plenty of plushness and comfort. The shorter, wider shape supports you nicely and lets you pedal with ease. And, the cutout means no pressure on sensitive areas and miles of smiles.

- Memory-foam padding for extra comfort - Elastomer suspension provides a smooth ride - Extra-large 11.75" x 10.75" size

Our Cruiser Select series uses our softest materials and provides a dual layer of comfort. We fuse an extra soft gel-foam pad to the top of our multi-stage foam. This combination is soft yet also supportive. The elastomer suspension evens out imperfections in the road and the airflow channel provides perineal relief and cool air circulation. - Size: 11.25" long x 9" wide - Padding: Select foam - Rail: Steel - Suspension: Elastomer spring - Cover: Soft-touch vinyl - Vented anatomic relief system

Our Contour saddle is classic in its design but it's not just form over function. The subtle tail at the rear of the saddle allows you to put a little extra power down without sliding off the back end. Multi-stage foam and dual-coil spring suspension provide a comfortable ride. - Size: 11.25" long x 11" wide - Contoured bucket design - Padding: Multi-stage foam - Suspension: Coil spring - Use: Cruiser - Rail: Steel - Cover material: Soft-Touch vinyl - Gender: Unisex

Cloud 9's Cruiser Select AR Seat is super comfortable thanks to ample gel padding, wide 11.25-inch top, and a vibration-damping elastomer suspension. Put one on your bike and experience the ultimate ride.

Completely renewed, sporting a dynamic tread pattern design. Matches with a race bike, as well as a classic city road bike. Available in a wide range of dimensions and colors. PureGrip Compound Based on activated silica compounds, this technology was originally intended as an performance level compound, but after intensive development at our Korbach Research and Development Department Facility, an advanced new compound with outstanding grip and cross-country properties was developed. This new rubber mix, given the self explanatory name "PureGrip", is ranked just behind our BlackChili Compound and is being used in our performance products both in the road and mountain bike sectors. Whilst providing great grip, it is also long lasting and highly durable – both characteristics of Continental tires, which are exclusively manufactured in the factory in Hefei (Asia). Suitable for E-Bikes For our E-Bike tyre we fall back on over 100 years' experience with moped and motorcycle tires. All of our city/trekking tires are rated to a standard speed of at least 25 km/h. Those tires marked e50 are also certified for S-Pedelecs. With their high quality structure, puncture protection is high and the rolling resistance is low offering protection from premature wear brought about by the additional driving force.

Fast, safe and comfortable — guaranteed! The Contact is the jack-of-all-trades among city and trekking tires. Its tread design is based upon the principles of bionics. A uniform center tread/belt assembly ensures a smooth and speedy ride on the road. Flexible shoulder lugs and fine sipes guarantee grip in curves and on loose surfaces. The overall tire construction rounds off the overall high quality. The ultra fine carcass fabric reduces the rolling resistance while providing a noticeably more comfortable ride. Reflective sidewall for extra visibility. Reflective Sidewall: REFLEX is 3M reflective is commonly known to be one of the most highly reflective material options. A thin, silver light-reflecting strip on both sidewalls that adds visibility and safety to Continental's city / commuter / urban tires.

With our PolyX Breaker, we bring our car expertise to the bicycle tire segment: Polyester has been used successfully for years in car tires and been tried and tested many times. The extremely resistant polyester fiber is woven tightly crosswise. In this way, a very high fabric density is reached, which not only makes the Breaker more resistant to foreign objects but is also especially resistant to punctures. The rolling resistance is also not negatively affected by the PolyX Breaker. - The right tire when it comes to tough conditions. - The right choice for a strong performance in the urban field and on tour.

Continental's Gatorskin Folding combines 3 flat-protection technologies into one fast-riding, high-mileage racing and training tire. It features a super-fine 180 thread-per-inch casing, a bead-to-bead layer of DuraSkin, and is finished with a Kevlar-reinforced top layer. The result is a tire with a lightweight folding bead that rolls and corners with the best of them while providing flat protection second to none. - DuraSkin sidewall protection - PolyX puncture protection - Weight: 220/240/320/325 grams (23c/25c/28c/32c)

The Sprinter is characterized by excellent rolling characteristics due to the supple carcass. It demonstrates its strength especially in use with criteria. When maximum acceleration is needed, this tyre is the one to rely on. The competitor convinces with low weight and a balanced ride.

The Sprinter GatorSkin inherits the best qualities of the ever-popular original Sprinter, namely the durable tread compound and effective puncture resistance. GatorSkin simply adds confidence-inspiring durability and the sidewall protection of DuraSkin to an already race-proven winner. Pro riders use a similar combination in their tires for Paris-Roubaix and other equipment-destroying classics in the springtime. If you want to get the miles in, but your streets aren't covered with the finest tarmac, this is your tubular.

Your pedals like to be pampered. The Crank Brothers Pedal Refresh Kit gives you everything you need to keep them happy. Pedal Refresh Kit includes: -Enduro catridge bearings - Igus LL-glide bearings - Double seal system (internal and external seals) - Hex alloy end caps - O-rings - Nuts - Sleeve bushings - Bearing removal tool Compatible with the following pedals (2010-present): - Eggbeaters - Candys - Mallets - 5050s

Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability.

Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: 10-15 (us) // 43-49 (eu) - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair

Crank Brothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. - Spindle material: Forged scm 435 chromoly steel - Body material: One piece composite - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 294g per pair - Warranty: 5 years

Crank Brothers' most versatile pedal. The Candy excels at it all—cyclocross, XC, trail, and all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. Specs: - Spindle material: Forged scm 435 chromoly steel - Body material: 6061-T6 aluminum - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 355g per pair - Warranty: 5 years

You've got flat shoes and shoes with cleats. Are you really gonna let your pedals tell you which ones you can wear? Crank Brothers' hybrid-style Double Shot is a flat and clipless pedal to suit your every pedaling whim. Molded pins and ribs offer superior grip, and diamond plate pads are supremely tactile. You've got entry from either side of the pedal, so that's two chances per revolution to catch. Thanks to the wide, platform-style body, though, you'll keep moving even if you don't. Specifications: - spindle material: forged scm 435 chromoly steel - body material: A380 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - cleat: premium brass cleats with shims included - weight: 395g per pair

Crank Brothers' game-changing hybrid pedal is now available in a trail-ready version designed for more aggressive riding styles. Details - Hybrid pedal half flat / half clip-in - 8 adjustable traction pins and textured finish for grip - Wide 57mm q-factor for stability at speed - Diamond plate pads for traction - 2-sided entry / superior mud shedding - Premium bearings & double seal system Specs - Adjustable pins: 8 per side - Body material: A380 aluminum - Cleats: Premium brass cleats with shims included - Inner bearing type: Igus LL-glide bearing - Max rider weight: No restriction - Outer bearing type: Enduro cartridge bearing - Q-factor: 57mm - Release angle: 15° / 20° - Spindle material: Forged scm 435 chromoly steel - Spring material: 300 series stainless steel - Warranty: 5 years - Weight: 403g per pair - Wing material: Cast stainless steel

The ultimate pedal for enduro riding and racing, with a longer spindle. - Concave platform for secure foothold - 6 adjustable pins per side for grip - Integrated traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - Chamfered edges to reduce rock-strikes - 57mm q-factor for increased shoe clearance and control - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system - Adjustable Pins: 6 per side - Body Material: 6061-T6 aluminum - Cleats: Premium brass cleats with shims included - Endcap: Hex alloy - Inner Bearing Type: Igus LL-glide bearing - Max Rider Weight: No restriction - Outer Bearing Type: Enduro cartridge bearing - Q-factor: 57mm - Release Angle: 15° / 20° - Spindle Material: Forged scm 435 chromoly steel - Spring Material: 300 series stainless steel - Warranty: 5 years - Weight: 424g per pair - Wing Material: 17-4PH stainless

For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps you in contact with the pedal so you can focus on your line. Four-sided entry ensures your foot will catch quickly and easily, as well as helping the Mallet E shed mud like no other. A 52mm q-factor is your best friend on tight trails, because who wants to be clotheslined by a tree? Not you, that's for sure. Throw in chamfered edges to ward off rock strikes, and a customizable float and release system and you're ready to shred. Specifications: - spindle material: forged scm 435 chromoly steel - body material: 6061-T6 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - adjustable pins: 6 per side for grip - endcap: hex alloy - cleat: premium brass cleats with shims included - weight: 419g per pair

A nylon evolution of DMR's V12 body design. Equipped with the same concave footprint and narrow profile DMR pedals are known for, while spinning on a Dual DU bushing system to provide the value of a plastic pedal with a thoughtful approach to increased durability. - Chromoly axle - Dual DU bushing system - Full-length 6mm off-road pins for added grip

- Bladed Revolution spokes 2.0/.09x2.3/2.0mm, black surface treatment resists scratches - Cold forging technology, CrNi stainless steel with rolled threads - No hub slotting necessary - 139g (32/265mm) - Box of 20 - Nipples sold separately

This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. - Double Butted: 2.0/1.8/2.0 - Compatible with straight pull hubs only - One 264mm spoke = 5.9g - Nipples sold separately

Rear axle conversion kits convert your hub to fit a new axle measurement or for a new group set. All DT Swiss hubs can be converted.

Champion 2.0 Black Spokes - One 264mm spoke = 7g

Dimension Anodized M5 Bolts fits most standard bottle boss and accessory mounts. - Fits most standard bottle boss and accessory mounts - Tapered socket head with 4mm broach M5 diameter bolt, 0.8mm thread pitch - 16mm thread length - Aluminium - Sold individually

Replacement freehub spoke protector, in various sizes for different freehub sizes. - Made of clear plastic - 3 hooks for affixing to spokes