Accessories
$12.00
The 1" YakAttack Ball Connector is 2.5" long and is designed to work with the 1" YakAttack Screwball or camera ball. Made from high strength composites and built for harsh marine environments.
1" Ball Connector
2.5" overall length
Lifetime warranty
Compatible with YakAttack 1" ScrewBall and camera ball
Made in the USA
Covered by our Built for Life Guarantee
$42.00
The YakAttack Advanced Rod Tube™, new for 2019, is our take on the classic tube-style rod holder designed for spinning and casting rods and reels. It features a gimbal lock that flips into place to accommodate longer rods as well as multiple attachment points on the bottom side for rod leashes, increasing gear security. Made from marine grade polymers the AR Tube is built to last and comes with our Built for Life Guarantee. The AR Rod Tube is track-mount ready, and features the LockNLoad™ Mounting System. The LockNLoad system offers unrivaled track-mount security, but its also incredibly easy to adjust through its patented pending design. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).
The AR Tube attaches to your kayak, boat, or other watercraft with YakAttack’s brand new LockNLoad mounting system, and is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit.
There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:
- From locked mode, simply squeeze a lever to go into adjustment mode.
- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you are back in locked mode.
- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.
This piece of mechanical brilliance is sure to make the LockNLoad the preferred mounting system of kayak anglers for 2018. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).
GearTrac not included
Made in the USA
Covered by our Built for Life Guarantee
Patent Pending
SKU: RHM-1003
$125.00 - $175.00
The original hard-sided kayak crate just got better. A lot better. Introducing the completely redesigned BlackPak Pro.
The result of intense collaboration and more than a year of R&D and design, the BlackPak Pro is fully riggable and boasts a hinged lid, 25% weight reduction, and best-in-class functionality. Enhancements include many things you might have expected, as well as some true-to-the-brand features that no one saw coming.
Size
The 13X13 BlackPak Pro is 13” x 13” x 13” (L,W,H) and weights in at 6.9 lbs. without TetherTubes and 8.2 lbs. with the included three TetherTubes .
The BLP-PRO-13X16 is 13” x 16” x 13” (L,W,H) and weighs in at 7.6 lbs. without TetherTubes and 9.2 lbs. with the included four TetherTubes.
The BLP-PRO-16X16 is 16” x 16” x 13” (L,W,H) and weighs in at 9.1 lbs. without TetherTubes and 11.5 lbs. with the included six TetherTubes.
Construction and Assembly
Injection-molded from UV stabilized polymers, the BlackPak Pro will last for many years, even in harsh marine environments. The ultra-stiff panels utilize a rib structure that offers exceptional rigidity with minimal weight, while their interlocking joints ensure an intuitive, frustration-free assembly process. Interlocking GridLoc panels utilize a tongue and groove edge design to make assembly a breeze. Just press them together (they won’t fall apart during assembly) and install the (included) stainless steel screws using a simple screwdriver.
Hinged Lid
The water shedding lid with fully adjustable hinges allows you to go from freely pivoting to a sticky setting that maintains the lid position when you let go of it, while integrated overtravel stops keep the lid within reach and limit it to a manageable angle. Sound dampening rubber bumpers ensure quiet closing of the lid, and the unique CatchLatch retention system secures the lid in a simple but surprisingly functional manner.
Rod Holders
The included three TetherTube rod holders with integrated but easily removable hook and tether systems ensure your rods stay put if things go wrong. Caged attachment points on both sides of the tube offer multiple hook points, and the oversized hook design is sized to attach directly to the shaft of your fishing rod if desired. The TetherTube rod holder mounts to the GridLoc panels using at least three of the four standoff pads, enabling several vertical positioning options. Mount them high for rods with long butts, or mount them low to elevate the BlackPak Pro into the HighNDry position.
Tankwell Security
Rubber feet offer noise dampening and isolation, while Omni corner brackets enable multiple hold-down methods. They are designed as attachment points for YakAttack OmniHooks (four of which are included), generic hooks, carabiners, or simple bungee.
Storage
Optimized for a wide variety of tackle boxes, including Plano 3700, Plano Edge, Bass Mafia Bait Coffin, Flambeau, and many more.
Rigability
The key to customizing and accessorizing the BlackPak Pro lies in the highly revolutionary GridLoc 2D mounting system, which offers a plethora of attachment points on the inside and outside of the panels. This gives our design team a platform for which they can design a myriad of dividers, holders, and other attachments. Development of these accessories is already underway!
Features: 13x13
3 Rod Holders with built-in rod leashes
Optimized for 3600 sized tackle boxes
Fits eight 3600 Plano boxes
Hinged lid with secure latches
New lightweight construction
GridLoc Mounting Platform located on every panel
Rubberized feet and built in noise dampening features
Internal dimensions (L, W, H) – 11.9” x 11.9” x 11.75”
External dimensions (L, W, H) – 12.94” x 12.94” x 13.3”
6.9 lbs. without TetherTubes and 8.2 lbs. with included three TetherTubes
When measuring your kayak's tankwell add 2.75" for every side you intend to attach TetherTubes
Build for use in harsh marine conditions
Includes stainless steel hardware
Made in the USA
Built for Life Guarantee
SKU: BLP-PRO-13X13
Features: 13x16
4 Rod Holders with built-in rod leashes
Optimized for 3700 sized tackle boxes
Fits five 3700 tackle boxes
Hinged lid with secure latches
New lightweight construction
GridLoc Mounting Platform located on every panel
Rubberized feet and built in noise dampening features
Internal dimensions (L, W, H) – 11.9” x 14.9” x 11.75”
External dimensions (L, W, H) – 12.94” x 15.94” x 13.3”
When measuring your kayak's tankwell add 2.75" for every side you intend to attach TetherTubes
7.6 lbs. without TetherTubes and 9.2 lbs. with the included four TetherTubes
Build for use in harsh marine conditions
Includes stainless steel hardware
Made in the USA
Built for Life Guarantee
SKU: BLP-PRO-13X16
Features: 16x16
6 Rod Holders with built-in rod leashes
Optimized
$22.00
The YakAttack BlackPak™ Trucker Hat features a medium high profile with the YakAttack and BlackPak™ logo. Whether you are on the water or out on the town with your friends or family the YakAttack BlackPak™ Trucker Hat will be sure to let everyone know that your are a die hard kayak angler. The unique elastic/Velcro closure makes for a great fitting cap and also helps maintain a snug fit so your hat won't blow off your head during high winds.
$30.00
The YakAttack Cam Straps are an essential for any kayak angler. The high-quality polyester webbing has a higher break strength, superior resistance to abrasion, less stretch, better UV resistance, and increased water resistance compared to common polypropylene straps sold by most companies. The custom rubber buckle cover helps prevent dents and scratches while car topping.
Sold in a 2 pack
6 ft. long
1 inch wide webbing
Made with high-quality polyester webbing
Custom rubber buckle cover
Buckle and webbing are made in China
Buckle cover and sewing are done in the USA
SKU: YEP-1006-06-2PK
9 ft. long
1 inch wide webbing
Made with high-quality polyester webbing
Custom rubber buckle cover
Buckle and webbing are made in China
Buckle cover and sewing are done in the USA
SKU: YEP-1006-09-2PK
$10.00
This deep dish CatchNRelease™ Drip Ring features a unique design which catches water coming off the paddle blade in the high position, and releases it back into the water during your downstroke. We think this is the driest drip ring on the market. Soft and supple, the CatchNRelease Drip Ring is designed to fit all common sized paddle shafts including Werner, Bending Branches, and other popular brands of kayak paddles.
Sold in a two pack
Fits standard diameter kayak paddles
Made in the USA
Built for Life Guarantee
SKU: YEP-1001
$65.00
Depthfinder installation on kayaks just got smarter. The YakAttack CellBlok is a track mounted battery box and its top surface serves as a mounting platform for the display and transducer deployment arm. No more drilling holes in your kayak or routing wires! Simply loosen the two track mount knobs and the CellBlok allows you to quickly and easily attach or remove your depthfinder. A minimum of 10.5" of track is required to attach the CellBlok. The YakAttack SwitchBlade Transducer Deployment Arm and our line of fish finder mounts pair perfectly with the CellBlok to create a complete fish finder mounting solution. This updated version of the CellBlok is new for fall 2020 and features an injection molded construction compared to the original model. The change in material has resulted in a 25% weight reduction and we also increased the size of the cable wraps to accommodate the larger wires used in today's fish finders.
Interior Space - 6.375'' long x 4.25'' wide x 2.60'' tall
Exterior Dimensions - 10.25'' x 6.75'' x 3.50''
CellBlok box only with hardware to attach to GearTrac.
Made in the USA
Covered by our Built for Life Guarantee
CellBlok weighs 1.4 lbs.
GearTrac, fish finder mount, transducer arm, and display not included.
Assembly required
Can be attached to YakAttack GearTrac and most other kayak track systems
Fish finder mount and GearTrac not included
Made in the USA
Popular batteries include the YakAttack/Nocqua 10ah, Dakota Lithium 10ah, and the Amped Outdoors 12ah
Made from premium materials designed for use in harsh marine environments
$29.95
It’s time for rod organization to take center stage. For years forward rod staging has fallen a little short. Many kayak manufactures have designed geometry in the kayak’s hull or the front hatch for rod staging, but none have really risen to the occasion. The CenterStage Rod Stager is a track mounted forward rod stager designed for use with up to four rods that utilizes our LockNLoad system to attach to your kayak’s track. From there you get the full maneuverability that the LockNLoad system offers, plus the adjustability of our new ClickTrac Rail system. The integrated ClickTrac Rail on the bottom of the stager allows you to adjust side to side with a click of a button to achieve the desired position. The CenterStage Rod Stager is made from Injection-molded, UV stabilized polymers, that will hold even in harsh marine environments.
Sold as a single pack
Includes the LockNLoad Mounting System
For use with up to four rods
Can be used horizontally or vertically
Track Mounted
Patent Pending
Made in the USA
SKU: RHM-1008
UPC: 819731016804
$250.00
Command the water with the YakAttack CommandStand™! Designed to fit most kayaks with or without a track system, the unique crossbar design allows you to adjust the width of the CommandStand™ for a perfect fit on most kayaks. Assembles with one hex key (included), but the pin-and-tether design means no tools are needed to deploy, lay down, or break down the CommandStand™ for stowing.
More than just a stand-assist bar, the CommandStand™ offers all of the features of a standup fishing station! Two RotoGrip Paddle Holders mean your paddle is there when you need it and out of the way when you don’t. Two MightyMount Bar Clamps allow you to attach any YakAttack accessory utilizing a single t-bolt, including rod holders, cup holders, camera mounts and more.
Pull 2 pins to lay down on the forward deck of your kayak, and pull 6 pins (4 at the base and 2 at the crossbar) to break the unit down to a tidy bundle, ready to stow in the mesh carrying bag (included).
Made in the USA from premium materials for a lifetime of use in even the harshest environments.
Anodized Aluminum
UV Stable Polymers
Coated and Uncoated Stainless Steel Hardware
Adjustable Width
Can be mounted to tracks or any flat surface
All necessary hardware included
Includes accessory kit
2 RotoGrip Paddle Holders
2 MightyMount Bar Clamps for attaching accessories
Mesh carrying bag with shoulder strap
Patent Pending
Made in the USA
Covered by our Built for Life Guarantee
SKU: SAP-1001
$35.00
In typical YakAttack fashion, what started as an idea for a single offset RotoGrip Paddle Holder resulted in a product with a bit more versatility. The DoubleHeader track mount can serve several different purposes, but in this case, it is the foundation for the perfect offset paddle holder solution that our customers have been dreaming of ever since the launch of the RotoGrip several years back. Compatible with standard diameter kayak paddles the RotoGrip Paddle Holder has become the most widely used paddle holder in the industry. The RotoGrip is a simple yet highly effective paddle holder solution, but many paddlers wanted to use one or two RotoGrips on a single side of the kayak. When using two RotoGrips on a single piece of track, you get a nice tight hold, but you also cover up the entire length of the track with your paddle, rendering open track space useless. The DoubleHeader in this configuration eliminates that problem entirely and offsets the paddle holders off the kayak allowing for the full functionality of the remaining track space for other accessories. If you are tight on track space, the DoubleHeader includes an additional feature to add LockNLoad accessories like YakAttack rod holders, camera mounts, and more. Simply replace the stock knob from the DoubleHeader with the LockNLoad base of a rod holder or other accessories, and you are able to have multiple attachments on a short section of track or a single point of attachment like a MightyMount II. The DoubleHeader track mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track.
Included with the DoubleHeader are two different Track Disk. These two Track Disks are designed to provide a snug fit in either the standard YakAttack GearTrac (GT90, GTSL90, GT175, MightyMount XL) or the wider opening of the YakAttack Top Loading family of GearTrac (GTTL90 and GTTL175). If a track system came included with your kayak, try both of them and determine which one will provide the best fit.
For added paddle security, included with the DoubleHeader and RotoGrip’s are two SnapNStrap Security Tethers. To secure your paddle unhook the bungee tab from the stored position on the base of the DoubleHeader, wrap it around the shaft of your paddle, and loop it over the tab on the outward side of the RotoGrip. This feature will come in handy for kayakers using pedal drive kayaks like a Hobie or motors like a Torqeedo or MotorGuide. In those situations, a paddle might not be needed all the time, so the security tethers provide extra peace of mind knowing your paddle is safe and sound. If you need quick access to your paddle at a moment's notice, the tethers have a stored position, so they do not get in the way when inserting or removing your paddle from the dual RotoGrips.
The DoubleHeader with Dual RotoGrip Paddle Holders is made in the USA from marine grade polymers and is backed by our Built for Life Guarantee.
Made in the USA
Built for Life Guarantee
Single point of attachment
LockNLoad Compatible
Includes two RotoGrip Paddle Holders
Includes two SnapNStrap Security Tethers
Includes two sizes of Track Disks
Perfect for anglers with pedal kayaks or motors
Compatible with standard diameter kayak paddles
DoubleHeader is 8.25” wide
The DoubleHeader track mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track.
$20.00
You’re not alone. When you bought your boat, you were excited about the built-in tracks and the promise of versatility they offered, only to find that there just aren’t many compatible accessories out there, and many of the ones that are available are just not what you’re looking for. The larger and heavier-duty version to our original GT Cleat, the GT Cleat XL™ is our simple and highly effective answer to the issue of line management. Best paired with 1/2" rope, this version of the GT Cleat features the new TurnKey™ adapter, our new solution for aluminum boats featuring built-in track on the gunwale. This nifty little gadget is low profile, easy to attach and adjust, and made in the USA.
Compatible with a wide variety of boat brands featuring a built-in track on the gunwale including the following:
Ranger Boats Lock-track
Crestliner SureMount and Lock Track
G3 Boats
Lund Boats SportTrak
Xpress Boats
War Eagle Boats - 45 degree T-Lock/Cap Rail
Lowe Boats
Duracraft Boats - 45 degree T-Lock/Cap Rail
Triton Boats Lock-track
Tracker Boats Versatrack
Excel Boats
Product Info:
Features TurnKey™ track adaption technology
Patent Pending
Meant for medium-duty applications
Made in the USA
Covered by our Built for Life Guarantee
SKU: MTA-1004
$16.00
As the industry leader in track systems and track mounted accessories, we knew we needed a track mounted cleat, and the GT Cleat™ is our simple and highly effective answer.Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). The GT Cleat makes for a perfect companion to our highly popular LeverLoc™ Anchor Trolley and is a low profile, easy to attach and adjust anchor line cleat. The underside of the cleat features two tabs and a rubber washer helping keep the cleat from rotating and sliding in the track from anchor line tension.
Attaches to all YakAttack GearTrac, MightyMount XL, and most other kayak track
Made in the USA
Made from premium materials designed for use in harsh marine environments
Compatible with up to 3/8” line
Made in the USA
Covered by our Built for Life Guarantee
SKU: AMS-1012
$25.00
Add a whole new level of versatility to your kayak, canoe, power boat, ATV, ORV, tractor, or other vehicle with the GT90 GearTrac from YakAttack! This medium duty surface mount track provides a platform that's not only adjustable, but fully configurable, enabling unparalleled versatility for accessory mounting! Includes #8-32 socket drive button head stainless steel screws plus nuts and washers. The optional FullBack backing plate provides easier installation and increased security.
3/32 hex wrench not included.
Designed for harsh marine environments
Compatible with 1/2" wide track hardware
Hole spacing 1-3/4"
0.90" wide x 12" long
U.S. Pat. No. 9,671,060 B1
Made in the USA
SKU: GT90-12
$20.00 - $30.00
The future of GearTrac™ has arrived. The GTTL series is a top loading version of our popular GT175. Instead of having to slide your accessory in from the ends of the GearTrac™ you are able to drop each accessory in from the top. This makes it very easy to adjust positioning while on the water when using multiple accessories on a single piece of GearTrac™.
Add a whole new level of versatility to your kayak, canoe, power boat, ATV, ORV, tractor, or other vehicle with the GTTL175 GearTrac™ from YakAttack! This heavy duty surface mount track provides a platform that's not only adjustable, but fully configurable, enabling unparalleled versatility for accessory mounting! Includes #10 blunt tip stainless steel thread forming screws. Install with the optional FullBack™ backing plate for ultra duty security. The GTTL175 is a true surface mount and doesn't require Inside access for instillation.
Not intended for use with the RAM Mounts® Quick Release Track Base. Designed for harsh marine environments
Compatible with 1/2" wide track hardware
Topside installation, no backside access required
4" Dimensions
Hole pattern 1-5/16" Wd X 1-3/4" Lg
1.75" wide x 4" long
U.S. Pat. No. 9,671,060 B1
Made in the USA
Covered by our Built for Life Guarantee
SKU: GTTL175-04
8" Dimensions
Hole pattern 1-5/16" Wd X 1-3/4" Lg
1.75" wide x 8" long
U.S. Pat. No. 9,671,060 B1
Made in the USA
Covered by our Built for Life Guarantee
SKU: GTTL175-08
12" Dimensions
Hole pattern 1-5/16" Wd X 1-3/4" Lg
1.75" wide x 12" long
U.S. Pat. No. 9,671,060 B1
Made in the USA
Covered by our Built for Life Guarantee
SKU: GTTL175-12
16" Dimensions
Hole pattern 1-5/16" Wd X 1-3/4" Lg
1.75" wide x 16" long
U.S. Pat. No. 9,671,060 B1
Made in the USA
Covered by our Built for Life Guarantee
SKU: GTTL175-16
$13.00 - $17.00
The GridLoc MightyMount XL was designed as a robust but economical mount for longer footprint areas. Compatible with all YakAttack track-mounted accessories, this injection molded mount functions similar to a GearTrac, and allows t-bolt accessories to be installed from either end. A simple twist allows quick and easy position adjustment, but a few extra turns are required to remove the accessory, giving the GridLoc MightyMount XL the same gear security features of the original YakAttack MightyMount, with all of the adjustability of our GearTrac. For LockNLoad accessories like the popular Omega or Zooka II Rod Holder, cutouts on the outer edges of the GridLoc MightyMount XL were added to accommodate the TrackTeeth located on the underside of the LockNLoad track mounts to prevent attachments from sliding along the track, adding even more security.
The GridLoc MightyMount XL was designed around the GridLoc Mounting platform featured on the BlackPak Pro and replaces the MightyMount XL. The overall lengths will be the same as the original MightyMount XL; 6”, 9”, 12”, but the hole pattern has been updated and is different. The hole spacing on the GridLoc MightyMount XL is 1.5” x 1.5”. A Phillips screwdriver and the included stainless steel screws are required for the installation on the BlackPak Pro. For installations on rotomolded and thermoformed kayaks a 1/8” drill bit will also be needed.
$20.00
The United States of America is where the kayak fishing craze started, and we're proud of that! Our "Fish the USA" tee is a great way to show you are too.
65% polyester/35% ring-spun USA cotton
Heat-set fabric to minimize shrinkage
$20.00
One of the most significant opportunities for customizing the new BlackPak Pro is found on the inside. When designing the BlackPak Pro and the GridLoc Mounting Platform, we incorporated internal screw bosses for future accessories to customize your BlackPak Pro more effectively from the inside out. The first interior accessory is our KnotLoc Bungee Dividers. This kit includes a total of six bungee dividers creating the ability to secure seven 3700 Plano tackle boxes in the 16x16 BlackPak Pro and is also compatible with all sizes of the BlackPak Pro. The KnotLoc attachment tabs attach using a stainless screw. To attach the bungee dividers, simply tie an overhand knot in the bungee and slide it through the hole in the bungee tab. The knot locks in place on the backside of the attachment tab and can also be removed in seconds, so you can quickly and easily add or remove the bungee dividers depending on your needs for an upcoming fishing trip. Once installed, the bungee tabs can be rotated to the left or right of the mounting location, helping you dial in the exact position of the bungee to accommodate tackle boxes of varying thicknesses better.
Compatible with all BlackPak Pro sizes
Includes components for six dividers
Includes stainless steel hardware
Phillips screwdriver required for installation
Built for use in harsh marine conditions
Made in the USA
Built for Life Guarantee
$30.00
Introducing the YakAttack 16” x 19” Landing Net. Whether you’re fishing from a kayak, boat, or the bank, this landing net delivers a great mix of functionality and durability, making your catch-and-release experiences seamless and hassle-free. This net is designed for anyone from new anglers looking for a quality option that won’t break the bank to professional guides who demand reliability and performance.
From largemouth bass to inshore redfish and trout the net opening of 16” wide x 19” long x 11” deep can accommodate a wide variety of fish species. Designed with conservation in mind, the soft rubber netting gently cradles your catch while minimizing the risk of injury to delicate skin and scales. The rubber material is snag-free, preventing hooks from getting embedded and tangled, allowing for a smooth and stress-free hook removal process. The rubber netting is easy to clean, ensuring your net stays fresh and ready for your next trip.
The net features a lightweight anodized aluminum 24” handle. For storage and transportation, the handle collapsed down to an overall length of 36” and when in use measures 56.75” when extended. Made from high-quality materials, the YakAttack landing net is built to withstand the rigors of saltwater and freshwater fishing. Its lightweight design ensures easy transport and maneuverability without compromising strength or reliability, making it an essential tool for a successful trip on the water.
Hoop size: 16” wide x 19” long x 11” deep
35.5" specs
Collapsed length: 36”
Expanded Length: 56.75”
Product weight: 1.6 lbs.
24" specs
Collapsed length: 29.5”
Expanded Length: 45.25”
Product weight: 1.4 lbs.
Rubber netting
Made from anodized aluminum
Floats if dropped overboard
Made in China
1 year warranty
SKU: NAT-1002
UPC: 819731017184
$60.00
Engineered to elevate your fishing experience, the LeaderBoard offers an unparalleled combination of functionality and convenience. Its buoyant design ensures it floats effortlessly on water to help in the case it falls overboard and features a dedicated leash point that provides a secure attachment point to prevent accidental loss. For tournament anglers, it boasts built-in dual identifier holders, allowing you to seamlessly display your ID for catch, photo, release style tournaments. Integrated cull tabs further enhance your catch tracking capabilities, allowing you to quickly set a visual representation of the length of your recent catches. Lines and numbers were laid out as a collaborative effort with key tournament decision-makers to ensure an accurate and easy-to-read tournament experience. Our objective was to develop a fish measuring board from the ground up that maximizes convenience and usability for the consumer while improving tournament integrity by minimizing opportunities for intentional or accidental misrepresentation of the length of fish being measured.
Culling Tabs
One feature unique to the YakAttack LeaderBoard is the built-in culling system. Each board has a slot across the top edge with three (3) black culling tabs that slide along the increments on the measuring surface. Many kayak tournament anglers we spoke with throughout the development process who participate in catch, photo, release style tournaments mentioned spending considerable time referring back to the photos in their cell phones to the check lengths on their smallest or largest fish. This process could be more efficient for your time management on the water and could be better for a healthy, quick fish release. The culling tabs allow anglers to track their smaller fish quicker during a tournament and adjust as they progress. Are the culling tabs useful if you are not a tournament angler? Absolutely! Permanently mark your personal best across three species or your top three fish for the year.
Floatation and Security
The LeaderBoard comes with EVA foam inlayed on the board's underside, creating the necessary buoyancy for floatation. Ethylene Vinyl Acetate is a closed-cell structured foam that provides resistance to water and moisture, so it will hold up for many years in a wet environment. Also included in the design of the board is a built-in tether point for added security. Just because it floats does not mean it can't drift out of reach quickly in current or wind. Tether not included.
Oversized Design and Geometry
It’s no secret that the LeaderBoard looks different than the measuring devices that you are used to. While most boards are relatively flat, our designers focused on geometry to better accommodate the shape of the fish. On top of being wider overall, this shape cradles the fish to help achieve a more natural presentation of the fish for photography. The angled design of the measuring surface adds rigidity to the board, virtually eliminating flex and minimizes the potential of glare, allowing for more qualified catch photos.
Integrated Tournament ID Holder
The YakAttack LeaderBoard is equipped with an integrated dual flip-out ID holder designed around standard-sized CPR tournament ID cards of 3.75" x 2.25" used by top kayak fishing tournament trails such as Hobie BOS, Kayak Bass Fishing, and Bassmaster Kayak Series. This feature provides exceptional convenience and security, ensuring anglers can easily avoid losing or misplacing their tournament IDs. The holder securely accommodates up to two tournament identifiers, allowing anglers to display one or two IDs simultaneously. This is essential for anglers participating in multiple tournaments at the same time. It’s easy-to-operate flip-out design enables quick and effortless deployment and stowage. Anglers can now seamlessly transition between displaying their identifiers for catch photos and quickly stowing them away when finished. Furthermore, the included clear resealable sleeves provide additional protection from the elements. These sleeves keep identifiers pristine and legible, ensuring tournament judges have a clear view of the necessary information.
DoubleTake Visual Indicator
Tournament fishing demands precision and integrity. The DoubleTake Visual Indicator on the YakAttack LeaderBoard is a revolutionary tool that addresses both these concerns. This innovative feature eliminates the ambiguity of traditional measurement boards with its mirrored surface, doubling the gap between the fish's nose and the vertical fence. This ingenious design ensures that even the smallest gaps are impossible to miss, leaving no room for doubt or debate. Say goodbye to the frustration of accidentally submitting a picture where the fish isn't truly touching the fence. The DoubleTake Visual Indicator drastically reduces this risk, allowing you to focus on the excitement of the competition instead of worrying about potential disqualifications or deduc
$90.00
The revolutionary forearm grip featured on the Leverage Landing Net offers unparalleled stability and control, while the hinged design allows the handle to fold alongside the net for compact and easy stowage which make the Leverage Landing Net the best net when kayak fishing. The high level of control and accuracy offered by the forearm grip means you don't need a giant hoop to net your next big fish and makes the Leverage Landing Net an essential piece of kayak fishing gear. This Leverage Landing Net has a wider, more traditionally designed hoop.
Revolutionary Forearm Grip
Folds for Easy Storage
Full Rubber Net
Wider, more traditionally designed hoop
20" X 21" Hoop
47'' Overall Length
Leverage Landing Net is a registered trademark of YakAttack, LLC
Netting is molded in Taiwan
All other components are made and assembled in the USA
Covered by our Built for Life Guarantee
SKU: LLN202148
$45.00
The first anchor trolley designed specifically for the job, the YakAttack LeverLoc™ Anchor Trolley features a LeverLoc™ line clamp, which locks your trolley line in place with a simple “flip of a switch” motion. Keeping the trolley lines in line is the PadHook, a simple but clever design that combines the functionality of both a pad-eye and a hook, keeping even the tightest trolley lines in place on the side of the kayak, not over your gunwale. When not in use, the easy-knot trolley ring snaps into the base of the LeverLoc™, quietly secured until deployed. Includes 35’ of USA made 550 paracord with a highly reflective tracer. This model features the HD option, which gets you two extra PadHooks plus backing plates for the pulleys and LeverLoc™, enabling a heavy duty install when compared to the self-threading screws included in the standard kit. Features YakAttack Stealth Pulleys for super smooth operation. The use of a YakAttack Rigging Bullet, RB1032, is highly recommend for installs where the install location is out of arms reach.
Easy installation
New YakAttack Stealth Pulleys
35' of highly reflective USA-made 550 paracord
Includes all necessary hardware for installation
Heavy duty
Includes backing plates and extra Padhooks not included in AMS-1003.
Made in the USA
Covered by our Built for Life Guarantee
SKU: AMS-1004
$45.00
No more ball mounts, no more slipping or rotating in the track. Designed to replace the factory base on Lowrance fishfinders, the Lowrance Fishfinder Mount is a simple, clean, and highly effective solution for mounting your fishfinder. Attaches to track using our new LockNLoad™ mounting system for maximum versatility. This mount fits the popular Lowrance Elite, Hook, and Elite Ti models of fishfinders. The LockNLoad track mount is compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Patent pending. Fish finder not included.
COMPATIBLE WITH
Lowrance Elite 3, 4, 5
Lowrance Hook 3, 4, 5
Lowrance Elite ti 3, 4, 5, 7
Simrad G05
GearTrac not included
Made in the USA
Covered by our Built for Life Guarantee
Patent Pending
SKU: FFP-1002
$15.00
Six stainless steel Yakattack MightyBolts™ with 1/2" wide head. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).
Six stainless steel MightyBolts™
Available with 1", 1 1/2", or 2'' Long Stud
1/2" Wide Head
1/4-20 Threading
Made in the USA
Covered by our Built for Life Guarantee
SKU: MB20-12-6
$9.00
$11.95
25% Off
The Yak Attack MightyMount Kit allows you to easily attach your VisiCarbon Pro anywhere on your yak, taking up a minimal footprint. The Yak Attack MightyMount Kit includes all necessary hardware.
Mounting hardware included
Allows you to easily attach your VisiCarbon Pro anywhere on your yak, taking up a minimal footprint
Small footprint - 2 in x 2 3/8 in x 1/2 in.
$15.00
The YakAttack MultiMount Cup Holder quickly and easily attaches to most kayak track systems. Designed for maximum versatility, the MultiMount Cup Holder accepts anything from stainless steel tumblers to Nalgene® Bottles to 12 oz cans and water bottles. Not thirsty? The MultiMount Cup Holder also makes a great place to put small tools and other items! Made in the USA from premium materials for a lifetime of use in even the harshest environments. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).
Patent Pending
Made in the USA
Covered by our Built for Life Guarantee
SKU: SSO-1001
$40.00
This is a truly universal solution that works flawlessly with spinning, casting, larger conventional reels, and yes – even fly rods of all sizes. A 360 degree rotating collar offers the ability to quickly secure the rod by capturing the reel, and allows spinning reels to be stowed in the natural downward position, not hung off the side. Multiple modes allow anglers to easily stage rods for quick access or lock them in for maximum security.
The Omega Pro adds an extension arm to help get your reel higher off the water or helps accommodate longer rod butts.
The Omega Pro attaches to your kayak, boat, or other watercraft with YakAttack’s brand new LockNLoad mounting system, and is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).
There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:
- From locked mode, simply squeeze a lever to go into adjustment mode.
- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you are back in locked mode.
- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.
This piece of mechanical brilliance is sure to make the LockNLoad the preferred mounting system of kayak anglers for 2018.
GearTrac not included
Made in the USA
Covered by our Built for Life Guarantee
Patent Pending
SKU: RHM-1002
$30.00
The Omega Rod Holder attaches to your kayak, boat, or other watercraft with YakAttack’s brand new LockNLoad mounting system, and is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).
There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:
- From locked mode, simply squeeze a lever to go into adjustment mode.
- In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you back in locked mode.
- To go to removal mode, flip the lever out, and the system easily slides off of the track mount.
Made in the USA
Covered by our Built for Life Guarantee
Patent Pending
SKU: RHM-1001
$100.00
The PanFish Pro™ is an updated version of the original PanFish that features a more durable construction, LockNLoad base, and new YakAttack camera ball system! The LockNLoad base offers complete 360° rotation while maintaining complete gear security. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).
One of the most frustrating moments for photographers and videographers is when you purchase a camera mount and you find out it doesn't work with your GoPro (or vise versa). We solved the issue by including both a standard 1/4-20 camera ball (which fits most standard cameras) and a GoPro attachment, enabling you to get the perfect shot, regardless of the equipment you're using.
The LockNLoad track mount system is the most innovative mounting system on the market, and is exactly what you'd expect from the industry leaders in track mounting technology. There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:
From locked mode, simply squeeze a lever to go into adjustment mode.
In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the accessory is completely secure while making adjustments. Let go of the lever and you are back in locked mode.
To go to removal mode, flip the lever out, and the system easily slides off of the track mount.
The ultra-durable aluminum construction of the PanFish Pro™ is not only super lightweight - it's also incredibly rigid, reducing shake in your camera footage.In addition, the patented design allows for one-hand rotation without loosening or tightening the product, giving you the ability to get the smoothest pan shot.
Utilizes the LockNLoad™ Track Mount System for easy on and off, angled articulation, and rotational pivoting
Durable, lightweight, and super rigid aluminum construction
Features the new YakAttack Camera Ball
It floats!
For use with camera utilizing a 1/4-20 mount or GoPro Cameras
33" Tall
Can add in LockNLoad Extensions for more height
Made in the USA
Covered by our Built for Life Guarantee
Patent Pending
U.S. Pat. No. 8,979,399
U.S. Pat. No. 8,783,975
SKU: CMS-1002
$60.00
The PanFish Portrait Pro™ is an updated version of the original PanFish Portrait that features a more durable construction, LockNLoad base, and new YakAttack camera ball system. The LockNLoad base offers complete 360° rotation while maintaining complete gear security. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).
One of the most frustrating moments for photographers and videographers is when you purchase a camera mount and you find out it doesn't work with your GoPro (or vise versa). We solved the issue by including both a standard 1/4-20 camera ball (which fits most standard cameras) and a GoPro attachment, enabling you to get the perfect shot, regardless of the equipment you're using.
The LockNLoad track mount system is the most innovative mounting system on the market, and is exactly what you'd expect from the industry leaders in track mounting technology. There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use:
From locked mode, simply squeeze a lever to go into adjustment mode.
In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the accessory is completely secure while making adjustments. Let go of the lever and you are back in locked mode.
To go to removal mode, flip the lever out, and the system easily slides off of the track mount.
The ultra-durable construction of the PanFish Portrait Pro™ is not only super lightweight - it's also incredibly rigid, reducing shake in your camera footage.
Utilizes the LockNLoad™ Track Mount System for easy on and off, angled articulation, and rotational pivoting
Durable, lightweight, and super rigid construction
Features the new YakAttack Camera Ball
For use with camera utilizing a 1/4-20 mount or GoPro Cameras
11.5" Tall
Can add in LockNLoad Extensions for more height
Made in the USA
Covered by our Built for Life Guarantee
Patent Pending
SKU: CMS-1001
$17.00
Voted Product of the Year for Yak Angler's Kayak Anglers Choice Awards for 2016.
The YakAttack RotoGrip™ Paddle Holder sheds a new light on the age old problem of paddle management. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Kayak and SUP anglers have lots of options for installing and configuring this handy little gadget. Super low profile at 2.25" tall, the RotoGrip™ Paddle Holder grips the paddle shaft between two soft rollers, securing your paddle quietly and with just the right amount of tension. Sold in single packs.
Utilizes the Mighty Bolt to attach to kayak track
2.25" tall
GearTrac not included
Single pack
Patent Pending
Made in the USA
Covered by our Built for Life Guarantee
SKU: GRP-1001
Page 1 of 2
Next page