Kayaking

The Backwater Assassin Carbon Fiber Hybrid Paddle is the full-size version of its legendary predecessor, the Assault Hand Paddle. Weighing right at 38 ounces and 42 ounces, respectively, paddle design and technology is again moving forward! The Assassin is available in 2 different adjustable lengths: 230-240cm (90.5-94.5in) & 250-260cm (98.5-102.5). The Assassin kayak paddles not only display the patented “hook and teeth” blade design and raised graphics package, they also provide unsurpassed performance and versatility. The hook is great for grabbing a line in the water, pulling in decoys, pulling you closer to the dock, or making a tree limb easier to reach. The oversized blade helps to pull a lot of water when paddling and makes turning even easier. The Assassin is designed for form as well as function. The unique blade design allows kayakers more freedom, more comfort and more confidence to challenge themselves. The Assassin was designed for both high angle and low angle paddlers. The shaft is made of a carbon hybrid material to help reduce the overall weight and the oversized ABS injected nylon blade is hard enough to push off on any surface and not crack or flex. Is your lure stuck in a tree? No problem, just grab the branch. Too close to the rocks or oyster shells? No problem, just give a push. Available in 230-240cm or 250-260cm adjustable lengths ABS injected nylon blade Hook feature to grab your line, waterfowl decoy, dock, or tree limb Serrated teeth edge can be used to launch yourself off solid surfaces Made of strong, fade resistant plastic Drip rings included Available only in a black shaft and black blade For added length, consider the 35cm Carbon Fiber Paddle Extension

Add a whole new level of versatility to your kayak, canoe, power boat, ATV, ORV, tractor, or other vehicle with the GT175 Generation II GearTrac™ from YakAttack! This heavy duty surface mount track provides a platform that's not only adjustable, but fully configurable, enabling unparalleled versatility for accessory mounting! Includes #10 blunt tip stainless steel thread forming screws. Install with the optional FullBack™ backing plate for ultra duty security. The GT175 Generation II GearTrac™ is a true surface mount and doesn't require Inside access for instillation. Designed for harsh marine environments Compatible with 1/2" wide track hardware Topside installation, no backside access required U.S. Pat. No. 9,671,060 B1 Made in the USA Covered by our Built for Life Guarantee

The Yak Attack MightyMount Kit allows you to easily attach your VisiCarbon Pro anywhere on your yak, taking up a minimal footprint. The Yak Attack MightyMount Kit includes all necessary hardware. Mounting hardware included Allows you to easily attach your VisiCarbon Pro anywhere on your yak, taking up a minimal footprint Small footprint - 2 in x 2 3/8 in x 1/2 in.

This deep dish CatchNRelease™ Drip Ring features a unique design which catches water coming off the paddle blade in the high position, and releases it back into the water during your downstroke. We think this is the driest drip ring on the market. Soft and supple, the CatchNRelease Drip Ring is designed to fit all common sized paddle shafts including Werner, Bending Branches, and other popular brands of kayak paddles. Sold in a two pack Fits standard diameter kayak paddles Made in the USA Built for Life Guarantee SKU: YEP-1001

The 1" YakAttack Ball Connector is 2.5" long and is designed to work with the 1" YakAttack Screwball or camera ball. Made from high strength composites and built for harsh marine environments. 1" Ball Connector 2.5" overall length Lifetime warranty Compatible with YakAttack 1" ScrewBall and camera ball Made in the USA Covered by our Built for Life Guarantee

The YakAttack ScrewBall™ is a 1" ball mount that is compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).. Featuring a rubber washer on the underside to allow compression and help keep the Screwball locked in place while in the track. Designed for harsh marine environments and made in the USA. Track mounted 1" ball Lifetime warranty MightyBolt mount compatible with most kayak track systems Made in the USA Covered by our Built for Life Guarantee

This soft rubber scupper plug is designed to fit circular scuppers in your sit-on-top kayak. The conical shape and hollow design allow for the rubber construction to accommodate scupper holes. The rigid center core gives you a nice place to push the plug in place and the pull tab makes for easy removal.

The GridLoc MightyMount XL was designed as a robust but economical mount for longer footprint areas. Compatible with all YakAttack track-mounted accessories, this injection molded mount functions similar to a GearTrac, and allows t-bolt accessories to be installed from either end. A simple twist allows quick and easy position adjustment, but a few extra turns are required to remove the accessory, giving the GridLoc MightyMount XL the same gear security features of the original YakAttack MightyMount, with all of the adjustability of our GearTrac. For LockNLoad accessories like the popular Omega or Zooka II Rod Holder, cutouts on the outer edges of the GridLoc MightyMount XL were added to accommodate the TrackTeeth located on the underside of the LockNLoad track mounts to prevent attachments from sliding along the track, adding even more security. The GridLoc MightyMount XL was designed around the GridLoc Mounting platform featured on the BlackPak Pro and replaces the MightyMount XL. The overall lengths will be the same as the original MightyMount XL; 6”, 9”, 12”, but the hole pattern has been updated and is different. The hole spacing on the GridLoc MightyMount XL is 1.5” x 1.5”. A Phillips screwdriver and the included stainless steel screws are required for the installation on the BlackPak Pro. For installations on rotomolded and thermoformed kayaks a 1/8” drill bit will also be needed.

The new PadLoc Paddle Holder features heightened security in a simple and budget friendly package. Using two points of contact it offers more holding power than other paddle holders using only a single point. Two rubber bumpers help cushion the paddle entry keeping you quiet and stealthy while on the water. The addition of a security strap gives you extra peace of mind knowing your paddle is safe and secure. The PadLoc Paddle Holder fits kayak paddles with standard size diameter paddle shafts and includes but not limited to Werner and Bending Branches paddles. Made in the USA Covered by our Built for Life Guarantee SKU: GRP-1002

YakAttack Roll-Top Dry Bag – Waterproof Storage for All Your Outdoor Adventures. Keep Your Gear Dry with YakAttack Dry Bags – Available in 5L, 10L, and 20L Sizes. Prepare for your next outdoor adventure with the YakAttack Dry Bag, designed to keep your essentials safe, dry, and organized. Whether you're kayaking, boating, fishing, or camping, this waterproof dry bag ensures your gear stays dry — even in the toughest conditions. Key Features of the YakAttack Roll-Top Dry Bag 500D Waterproof PVC Construction: Built for maximum durability and water resistance, this dry bag ensures your gear stays dry even in the wettest conditions. Integrated Air Valve: Easily evacuate trapped air and create a more compact dry bag for storage. Need added buoyancy? The air valve lets you inflate the dry bag, ensuring your gear floats when needed. Clear Viewing Panel: The transparent panel lets you see what's inside without having to unpack everything, so you can grab the gear you need quickly. Roll-Top Closure with Soft PVC Collar: Not all dry bags are created equal. The YakAttack Dry Bag features a soft PVC collar around the roll-top closure, enhancing the seal for superior water protection. Removable Shoulder Strap for Easy Carrying: Whether you're hiking, kayaking, or fishing, the removable shoulder strap provides a convenient and comfortable way to carry your dry bag. Versatile Attachment Points: With integrated D-rings on the top and bottom, the YakAttack Dry Bag can be easily secured to your kayak, boat, or backpack. Available in Multiple Sizes for Every Adventure — making it perfect for everything from short day trips to extended outdoor expeditions. 5L Dry Bag: Perfect for short outings or as a personal storage bag for small essentials. Store your phone, wallet, keys, GoPro batteries, or a lightweight jacket. Ideal for day hikes, short kayaking trips, or fishing excursions. 10L Dry Bag: The ideal size for day trips. Store an extra layer, camera, snacks, and small accessories for a full day on the water or trail. Whether you're paddleboarding, kayaking, or fishing, the 10L is a reliable companion for your adventure. 20L Dry Bag: Perfect for multi-day adventures or camping trips. Keep your clothes, first-aid kit, and extra gear dry and organized. Whether you're boating, kayaking, or trekking, the 20L size gives you plenty of room for your essentials. Specifications: Material: 500D Waterproof PVC Sizes Available: 5L, 10L, 20L, 30L Closure: Roll-top PVC soft collar with buckle Additional Features: Clear viewing panel, integrated D-rings, removable shoulder strap, external air valve Capacity: 5L Dimensions: 7" x 15" x 7" Weight: 0.53 lbs SKU: SBA-1001 UPC: 819731017078 Made in China

Six stainless steel Yakattack MightyBolts™ with 1/2" wide head. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Six stainless steel MightyBolts™ Available with 1", 1 1/2", or 2'' Long Stud 1/2" Wide Head 1/4-20 Threading Made in the USA Covered by our Built for Life Guarantee SKU: MB20-12-6

The YakAttack MultiMount Cup Holder quickly and easily attaches to most kayak track systems. Designed for maximum versatility, the MultiMount Cup Holder accepts anything from stainless steel tumblers to Nalgene® Bottles to 12 oz cans and water bottles. Not thirsty? The MultiMount Cup Holder also makes a great place to put small tools and other items! Made in the USA from premium materials for a lifetime of use in even the harshest environments. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Patent Pending Made in the USA Covered by our Built for Life Guarantee SKU: SSO-1001

As the industry leader in track systems and track mounted accessories, we knew we needed a track mounted cleat, and the GT Cleat™ is our simple and highly effective answer.Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). The GT Cleat makes for a perfect companion to our highly popular LeverLoc™ Anchor Trolley and is a low profile, easy to attach and adjust anchor line cleat. The underside of the cleat features two tabs and a rubber washer helping keep the cleat from rotating and sliding in the track from anchor line tension. Attaches to all YakAttack GearTrac, MightyMount XL, and most other kayak track Made in the USA Made from premium materials designed for use in harsh marine environments Compatible with up to 3/8” line Made in the USA Covered by our Built for Life Guarantee SKU: AMS-1012

Voted Product of the Year for Yak Angler's Kayak Anglers Choice Awards for 2016. The YakAttack RotoGrip™ Paddle Holder sheds a new light on the age old problem of paddle management. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Kayak and SUP anglers have lots of options for installing and configuring this handy little gadget. Super low profile at 2.25" tall, the RotoGrip™ Paddle Holder grips the paddle shaft between two soft rollers, securing your paddle quietly and with just the right amount of tension. Sold in single packs. Utilizes the Mighty Bolt to attach to kayak track 2.25" tall GearTrac not included Single pack Patent Pending Made in the USA Covered by our Built for Life Guarantee SKU: GRP-1001

These tie-downs come with a Mighty Bolt base. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Perfect as an anchoring point to secure a cooler or other accessory, as well as being a great adjustment point for directing steering cables on the deck of your kayak. Sold in a two-pack. Patent Pending 2 Pack Made of stainless steel Compatible with GearTrac, MightyMounts, and most other factory-installed track systems Made in the USA Covered by our Built for Life Guarantee SKU: AAP-1016

You’re not alone. When you bought your boat, you were excited about the built-in tracks and the promise of versatility they offered, only to find that there just aren’t many compatible accessories out there, and many of the ones that are available are just not what you’re looking for. The larger and heavier-duty version to our original GT Cleat, the GT Cleat XL™ is our simple and highly effective answer to the issue of line management. Best paired with 1/2" rope, this version of the GT Cleat features the new TurnKey™ adapter, our new solution for aluminum boats featuring built-in track on the gunwale. This nifty little gadget is low profile, easy to attach and adjust, and made in the USA. Compatible with a wide variety of boat brands featuring a built-in track on the gunwale including the following: Ranger Boats Lock-track Crestliner SureMount and Lock Track G3 Boats Lund Boats SportTrak Xpress Boats War Eagle Boats - 45 degree T-Lock/Cap Rail Lowe Boats Duracraft Boats - 45 degree T-Lock/Cap Rail Triton Boats Lock-track Tracker Boats Versatrack Excel Boats Product Info: Features TurnKey™ track adaption technology Patent Pending Meant for medium-duty applications Made in the USA Covered by our Built for Life Guarantee SKU: MTA-1004

The future of GearTrac™ has arrived. The GTTL series is a top loading version of our popular GT175. Instead of having to slide your accessory in from the ends of the GearTrac™ you are able to drop each accessory in from the top. This makes it very easy to adjust positioning while on the water when using multiple accessories on a single piece of GearTrac™. Add a whole new level of versatility to your kayak, canoe, power boat, ATV, ORV, tractor, or other vehicle with the GTTL175 GearTrac™ from YakAttack! This heavy duty surface mount track provides a platform that's not only adjustable, but fully configurable, enabling unparalleled versatility for accessory mounting! Includes #10 blunt tip stainless steel thread forming screws. Install with the optional FullBack™ backing plate for ultra duty security. The GTTL175 is a true surface mount and doesn't require Inside access for instillation. Not intended for use with the RAM Mounts® Quick Release Track Base. Designed for harsh marine environments Compatible with 1/2" wide track hardware Topside installation, no backside access required 4" Dimensions Hole pattern 1-5/16" Wd X 1-3/4" Lg 1.75" wide x 4" long U.S. Pat. No. 9,671,060 B1 Made in the USA Covered by our Built for Life Guarantee SKU: GTTL175-04 8" Dimensions Hole pattern 1-5/16" Wd X 1-3/4" Lg 1.75" wide x 8" long U.S. Pat. No. 9,671,060 B1 Made in the USA Covered by our Built for Life Guarantee SKU: GTTL175-08 12" Dimensions Hole pattern 1-5/16" Wd X 1-3/4" Lg 1.75" wide x 12" long U.S. Pat. No. 9,671,060 B1 Made in the USA Covered by our Built for Life Guarantee SKU: GTTL175-12 16" Dimensions Hole pattern 1-5/16" Wd X 1-3/4" Lg 1.75" wide x 16" long U.S. Pat. No. 9,671,060 B1 Made in the USA Covered by our Built for Life Guarantee SKU: GTTL175-16

The United States of America is where the kayak fishing craze started, and we're proud of that! Our "Fish the USA" tee is a great way to show you are too. 65% polyester/35% ring-spun USA cotton Heat-set fabric to minimize shrinkage

One of the most significant opportunities for customizing the new BlackPak Pro is found on the inside. When designing the BlackPak Pro and the GridLoc Mounting Platform, we incorporated internal screw bosses for future accessories to customize your BlackPak Pro more effectively from the inside out. The first interior accessory is our KnotLoc Bungee Dividers. This kit includes a total of six bungee dividers creating the ability to secure seven 3700 Plano tackle boxes in the 16x16 BlackPak Pro and is also compatible with all sizes of the BlackPak Pro. The KnotLoc attachment tabs attach using a stainless screw. To attach the bungee dividers, simply tie an overhand knot in the bungee and slide it through the hole in the bungee tab. The knot locks in place on the backside of the attachment tab and can also be removed in seconds, so you can quickly and easily add or remove the bungee dividers depending on your needs for an upcoming fishing trip. Once installed, the bungee tabs can be rotated to the left or right of the mounting location, helping you dial in the exact position of the bungee to accommodate tackle boxes of varying thicknesses better. Compatible with all BlackPak Pro sizes Includes components for six dividers Includes stainless steel hardware Phillips screwdriver required for installation Built for use in harsh marine conditions Made in the USA Built for Life Guarantee

The YakAttack Stealth Pulley is engineered to be the most quiet, low profile, shielded, and snag free pulley ever created for kayaks. Designed for use with anchor trolleys but great for many other applications. Teflon infused, wear resistant nylon rollers offer quiet, smooth operation and extreme durability for a lifetime of use. The shielded, snag-proof housing protects the rollers from docks, stumps, and other obstacles you may encounter on the water. 2 Pack Hardware Included Features same hole pattern as Hobie and Harken pulleys Made in the USA Covered by our Built for Life Guarantee

The YakAttack Track Mount Vertical Tie Downs come with a Mighty Bolt base. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Perfect as an anchoring point to secure a cooler or any other accessory to the track. Designed to work with 1'' and 1.5'' flat webbing and can also be used with bungee. Made in the USA from premium materials for a lifetime of use in even the harshest environments. Sold in a 2 pack. Patent Pending Made in the USA Covered by our Built for Life Guarantee SKU: AAP-1025

The YakAttack BlackPak™ Trucker Hat features a medium high profile with the YakAttack and BlackPak™ logo. Whether you are on the water or out on the town with your friends or family the YakAttack BlackPak™ Trucker Hat will be sure to let everyone know that your are a die hard kayak angler. The unique elastic/Velcro closure makes for a great fitting cap and also helps maintain a snug fit so your hat won't blow off your head during high winds.

The Black YakAttack Trucker Hat features a medium high profile with the YakAttack logo and a sleek, every day look. The mesh back helps keep you cool during warm summer days. The unique elastic/Velcro closure makes for a great fitting cap and also helps maintain a snug fit so your hat won't blow off your head during high winds.

Add a whole new level of versatility to your kayak, canoe, power boat, ATV, ORV, tractor, or other vehicle with the GT90 GearTrac from YakAttack! This medium duty surface mount track provides a platform that's not only adjustable, but fully configurable, enabling unparalleled versatility for accessory mounting! Includes #8-32 socket drive button head stainless steel screws plus nuts and washers. The optional FullBack backing plate provides easier installation and increased security. 3/32 hex wrench not included. Designed for harsh marine environments Compatible with 1/2" wide track hardware Hole spacing 1-3/4" 0.90" wide x 12" long U.S. Pat. No. 9,671,060 B1 Made in the USA SKU: GT90-12

After years of using the standard rod tube on the YakAttack BlackPak, we knew it was time to add our YakAttack flair and design a product that was worthy of the YakAttack name. The TetherTube was modeled after our popular AR Tube Rod Holder and works flawlessly with spinning and casting rods. The angled lead-in at the top of the TetherTube makes it a breeze to insert your rods and helps lock in your casting and spinning reels keeping them aligned and ready. For added security, the integrated but easily removable hook and tether systems ensure your rods stay put if things go wrong. Caged attachment points on both sides of the tube offer multiple hook points, and the oversized hook design is sized to attach directly to the shaft of your fishing rod if desired. The Tether Tube is compatible with the BlackPak Pro but will not work with the classic BlackPak. Made from marine grade polymers, the Tether Tube is built to last and comes with our Built for Life Guarantee. The included hardware kit allows for installs on the BlackPak Pro or applications where a nut and washer are needed. Sold as a two pack Includes the integrated hook and tether Compatible with spinning and casting rods Hardware included Only compatible with the BlackPak Pro, not the classic BlackPak Made from marine grade polymers Made in the USA Covered by our Built for Life Guarantee

It’s time for rod organization to take center stage. For years forward rod staging has fallen a little short. Many kayak manufactures have designed geometry in the kayak’s hull or the front hatch for rod staging, but none have really risen to the occasion. The CenterStage Rod Stager is a track mounted forward rod stager designed for use with up to four rods that utilizes our LockNLoad system to attach to your kayak’s track. From there you get the full maneuverability that the LockNLoad system offers, plus the adjustability of our new ClickTrac Rail system. The integrated ClickTrac Rail on the bottom of the stager allows you to adjust side to side with a click of a button to achieve the desired position. The CenterStage Rod Stager is made from Injection-molded, UV stabilized polymers, that will hold even in harsh marine environments. Sold as a single pack Includes the LockNLoad Mounting System For use with up to four rods Can be used horizontally or vertically Track Mounted Patent Pending Made in the USA SKU: RHM-1008 UPC: 819731016804

The YakAttack Cam Straps are an essential for any kayak angler. The high-quality polyester webbing has a higher break strength, superior resistance to abrasion, less stretch, better UV resistance, and increased water resistance compared to common polypropylene straps sold by most companies. The custom rubber buckle cover helps prevent dents and scratches while car topping. Sold in a 2 pack 6 ft. long 1 inch wide webbing Made with high-quality polyester webbing Custom rubber buckle cover Buckle and webbing are made in China Buckle cover and sewing are done in the USA SKU: YEP-1006-06-2PK 9 ft. long 1 inch wide webbing Made with high-quality polyester webbing Custom rubber buckle cover Buckle and webbing are made in China Buckle cover and sewing are done in the USA SKU: YEP-1006-09-2PK

Introducing the YakAttack 16” x 19” Landing Net. Whether you’re fishing from a kayak, boat, or the bank, this landing net delivers a great mix of functionality and durability, making your catch-and-release experiences seamless and hassle-free. This net is designed for anyone from new anglers looking for a quality option that won’t break the bank to professional guides who demand reliability and performance. From largemouth bass to inshore redfish and trout the net opening of 16” wide x 19” long x 11” deep can accommodate a wide variety of fish species. Designed with conservation in mind, the soft rubber netting gently cradles your catch while minimizing the risk of injury to delicate skin and scales. The rubber material is snag-free, preventing hooks from getting embedded and tangled, allowing for a smooth and stress-free hook removal process. The rubber netting is easy to clean, ensuring your net stays fresh and ready for your next trip. The net features a lightweight anodized aluminum 24” handle. For storage and transportation, the handle collapsed down to an overall length of 36” and when in use measures 56.75” when extended. Made from high-quality materials, the YakAttack landing net is built to withstand the rigors of saltwater and freshwater fishing. Its lightweight design ensures easy transport and maneuverability without compromising strength or reliability, making it an essential tool for a successful trip on the water. Hoop size: 16” wide x 19” long x 11” deep 35.5" specs Collapsed length: 36” Expanded Length: 56.75” Product weight: 1.6 lbs. 24" specs Collapsed length: 29.5” Expanded Length: 45.25” Product weight: 1.4 lbs. Rubber netting Made from anodized aluminum Floats if dropped overboard Made in China 1 year warranty SKU: NAT-1002 UPC: 819731017184

The Omega Rod Holder attaches to your kayak, boat, or other watercraft with YakAttack’s brand new LockNLoad mounting system, and is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use: - From locked mode, simply squeeze a lever to go into adjustment mode. - In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you back in locked mode. - To go to removal mode, flip the lever out, and the system easily slides off of the track mount. Made in the USA Covered by our Built for Life Guarantee Patent Pending SKU: RHM-1001

In typical YakAttack fashion, what started as an idea for a single offset RotoGrip Paddle Holder resulted in a product with a bit more versatility. The DoubleHeader track mount can serve several different purposes, but in this case, it is the foundation for the perfect offset paddle holder solution that our customers have been dreaming of ever since the launch of the RotoGrip several years back. Compatible with standard diameter kayak paddles the RotoGrip Paddle Holder has become the most widely used paddle holder in the industry. The RotoGrip is a simple yet highly effective paddle holder solution, but many paddlers wanted to use one or two RotoGrips on a single side of the kayak. When using two RotoGrips on a single piece of track, you get a nice tight hold, but you also cover up the entire length of the track with your paddle, rendering open track space useless. The DoubleHeader in this configuration eliminates that problem entirely and offsets the paddle holders off the kayak allowing for the full functionality of the remaining track space for other accessories. If you are tight on track space, the DoubleHeader includes an additional feature to add LockNLoad accessories like YakAttack rod holders, camera mounts, and more. Simply replace the stock knob from the DoubleHeader with the LockNLoad base of a rod holder or other accessories, and you are able to have multiple attachments on a short section of track or a single point of attachment like a MightyMount II. The DoubleHeader track mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track. Included with the DoubleHeader are two different Track Disk. These two Track Disks are designed to provide a snug fit in either the standard YakAttack GearTrac (GT90, GTSL90, GT175, MightyMount XL) or the wider opening of the YakAttack Top Loading family of GearTrac (GTTL90 and GTTL175). If a track system came included with your kayak, try both of them and determine which one will provide the best fit. For added paddle security, included with the DoubleHeader and RotoGrip’s are two SnapNStrap Security Tethers. To secure your paddle unhook the bungee tab from the stored position on the base of the DoubleHeader, wrap it around the shaft of your paddle, and loop it over the tab on the outward side of the RotoGrip. This feature will come in handy for kayakers using pedal drive kayaks like a Hobie or motors like a Torqeedo or MotorGuide. In those situations, a paddle might not be needed all the time, so the security tethers provide extra peace of mind knowing your paddle is safe and sound. If you need quick access to your paddle at a moment's notice, the tethers have a stored position, so they do not get in the way when inserting or removing your paddle from the dual RotoGrips. The DoubleHeader with Dual RotoGrip Paddle Holders is made in the USA from marine grade polymers and is backed by our Built for Life Guarantee. Made in the USA Built for Life Guarantee Single point of attachment LockNLoad Compatible Includes two RotoGrip Paddle Holders Includes two SnapNStrap Security Tethers Includes two sizes of Track Disks Perfect for anglers with pedal kayaks or motors Compatible with standard diameter kayak paddles DoubleHeader is 8.25” wide The DoubleHeader track mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track.

Secure your kayak fishing gear without bulky leashes or floats using the YakAttack Track Mount Retractor. This super versatile unit combines the innovation you've come to expect from YakAttack and genuine T-Reign retracting mechanism, 36" Kevlar cord, and a removable 4" tether. Designed for track mounting, this kit comes complete with everything you need, and is compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). GearTrac not included. UV Resistant High Density Polyethylene 36" Kevlar Cord Removable 4" tether Patent Pending Made in the USA Covered by our Built for Life Guarantee SKU: RET-1002

The VISIFlag™ from YakAttack is a 52" tall flag pole offering enhanced daytime visibility. It fits in most tube-style rod holders. For day and night time visibility enhancement, check out the VISICarbon Pro™. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). 52" Tall Highly Visible Fits in to most tube style rod holders Made in the USA Covered by our Built for Life Guarantee SKU: VFP-1001 Vinyl used in this product is phthalate free and CSPAI compliant.

This is a truly universal solution that works flawlessly with spinning, casting, larger conventional reels, and yes – even fly rods of all sizes. A 360 degree rotating collar offers the ability to quickly secure the rod by capturing the reel, and allows spinning reels to be stowed in the natural downward position, not hung off the side. Multiple modes allow anglers to easily stage rods for quick access or lock them in for maximum security. The Omega Pro adds an extension arm to help get your reel higher off the water or helps accommodate longer rod butts. The Omega Pro attaches to your kayak, boat, or other watercraft with YakAttack’s brand new LockNLoad mounting system, and is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use: - From locked mode, simply squeeze a lever to go into adjustment mode. - In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you are back in locked mode. - To go to removal mode, flip the lever out, and the system easily slides off of the track mount. This piece of mechanical brilliance is sure to make the LockNLoad the preferred mounting system of kayak anglers for 2018. GearTrac not included Made in the USA Covered by our Built for Life Guarantee Patent Pending SKU: RHM-1002

The YakAttack Advanced Rod Tube™, new for 2019, is our take on the classic tube-style rod holder designed for spinning and casting rods and reels. It features a gimbal lock that flips into place to accommodate longer rods as well as multiple attachment points on the bottom side for rod leashes, increasing gear security. Made from marine grade polymers the AR Tube is built to last and comes with our Built for Life Guarantee. The AR Rod Tube is track-mount ready, and features the LockNLoad™ Mounting System. The LockNLoad system offers unrivaled track-mount security, but its also incredibly easy to adjust through its patented pending design. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). The AR Tube attaches to your kayak, boat, or other watercraft with YakAttack’s brand new LockNLoad mounting system, and is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit. There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use: - From locked mode, simply squeeze a lever to go into adjustment mode. - In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you are back in locked mode. - To go to removal mode, flip the lever out, and the system easily slides off of the track mount. This piece of mechanical brilliance is sure to make the LockNLoad the preferred mounting system of kayak anglers for 2018. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). GearTrac not included Made in the USA Covered by our Built for Life Guarantee Patent Pending SKU: RHM-1003

The YakAttack Zooka II™ Rod Holder is based off our top selling Zooka Tube which we sold for a number of years. It was one of the first rod holders on the market to look different and function differently with no moving parts on the body of the rod holder and used the specific geometry of spinning and casting rods and reels to lock your gear in place without having to move or secure rotating collars or straps. The new and improved Zooka II features the highly popular LockNLoad™ Mounting System and includes a 4" extension similar to the Omega Pro Rod Holder. Compared to the original Zooka Tube, we have altered the size and geometry of the Zooka II Rod Holder to better accept larger conventional gear and will accommodate just about any rod other than a fly rod. For everyone that enjoyed using the old Zooka Tube or even currently uses it this one is for you and we know you will enjoy the updated, improved, and more secure YakAttack Zooka II Rod Holder. The Zooka II attaches to your kayak, boat, or other watercraft with YakAttack’s brand new LockNLoad mounting system, and is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit. There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use: - From locked mode, simply squeeze a lever to go into adjustment mode. - In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you are back in locked mode. - To go to removal mode, flip the lever out, and the system easily slides off of the track mount. This piece of mechanical brilliance is sure to make the LockNLoad the preferred mounting system of kayak anglers for 2018. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). GearTrac not included Made in the USA Covered by our Built for Life Guarantee Patent Pending SKU: RHM-1004

The first anchor trolley designed specifically for the job, the YakAttack LeverLoc™ Anchor Trolley features a LeverLoc™ line clamp, which locks your trolley line in place with a simple “flip of a switch” motion. Keeping the trolley lines in line is the PadHook, a simple but clever design that combines the functionality of both a pad-eye and a hook, keeping even the tightest trolley lines in place on the side of the kayak, not over your gunwale. When not in use, the easy-knot trolley ring snaps into the base of the LeverLoc™, quietly secured until deployed. Includes 35’ of USA made 550 paracord with a highly reflective tracer. This model features the HD option, which gets you two extra PadHooks plus backing plates for the pulleys and LeverLoc™, enabling a heavy duty install when compared to the self-threading screws included in the standard kit. Features YakAttack Stealth Pulleys for super smooth operation. The use of a YakAttack Rigging Bullet, RB1032, is highly recommend for installs where the install location is out of arms reach. Easy installation New YakAttack Stealth Pulleys 35' of highly reflective USA-made 550 paracord Includes all necessary hardware for installation Heavy duty Includes backing plates and extra Padhooks not included in AMS-1003. Made in the USA Covered by our Built for Life Guarantee SKU: AMS-1004

No more ball mounts, no more slipping or rotating in the track. Designed to replace the factory base on Lowrance fishfinders, the Lowrance Fishfinder Mount is a simple, clean, and highly effective solution for mounting your fishfinder. Attaches to track using our new LockNLoad™ mounting system for maximum versatility. This mount fits the popular Lowrance Elite, Hook, and Elite Ti models of fishfinders. The LockNLoad track mount is compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Patent pending. Fish finder not included. COMPATIBLE WITH Lowrance Elite 3, 4, 5 Lowrance Hook 3, 4, 5 Lowrance Elite ti 3, 4, 5, 7 Simrad G05 GearTrac not included Made in the USA Covered by our Built for Life Guarantee Patent Pending SKU: FFP-1002

The YakAttack 20L Roll-Top Dry Bag Backpack is made from waterproof materials and features a roll-top closure for a tight seal. Easy to use and comfortable to wear throughout the day. Whether you are kayaking, hiking, or tackling a challenging bike ride, keeping your gear dry is paramount. This backpack offers complete waterproof protection, ensuring your belongings stay safe and secure from the elements. It features a roll-top closure, making it incredibly easy to use. Just fold the top down a few times, buckle it, and you're ready. Featuring an additional front pocket and two side mesh pockets, you'll have a designated place for every item. With its sleek black design, this dry bag backpack is the ultimate solution for outdoor adventures where moisture could pose a threat. Constructed with durable materials, it's built to withstand the rigors of your active lifestyle. Keep your essentials protected and organized, no matter the weather conditions. Waterproof Roll-top closure with buckle Additional front pocket and two side mesh pockets 20 liter capacity Faux carbon fiber color Adjustable breathable mesh backpack straps Product dims: 16" x 13" x 8" Product Weight: 1.4 lbs. Made in China SKU: SBA-1005 UPC: 819731017153

With a single product you can attach the SwitchBlade to either your YakAttack CellBlok, deck mount, or on a track system. We designed the blade to minimize gurgle and resistance, making the SwitchBlade the most efficient transducer arm on the market. The patented arm folds up compactly. No more cumbersome, rigid arm to deal with. And for the angler that really wants to dial it in to fit their boat perfectly, we made the length of the arms customizable and can easily be cut to length to accommodate nearly any kayak on the market. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Unlike other transducer deployment arms of the past the new SwitchBlade Transducer Arm from YakAttack is focused on speed and adjustability. Featuring a hydrodynamic blade design the SwitchBlade causes less water turbulence resulting in a faster and less noisy over-the-side transducer mounting solution. Whether the SwitchBlade Transducer Arm is mounted on top of a YakAttack CellBlok or on the gunwale of your kayak the depth of the transducer is easily adjustable and gives you the ability to get the transducer deep enough for your side scan fish finder. If you don't need the full length of the SwitchBlade simple remove the middle arm and now you have a customized solution. To deploy or retrieve the transducer arm the SwitchBlade features a unique tubular design and multi pivot allowing for easy articulation in and out of the water. In 2018, we launched the LockNLoad™ Mounting System for rod holders and fish finder mounts and we knew we had to find a way to integrate our new mounting system into the SwitchBlade Transducer Deployment Arm. By replacing the included knob used to attach the SwitchBlade base to the track with the the LockNLoad Mounting base it gives you the ability to mount your fish finder and transducer arm in one compact system. Can be attached to YakAttack GearTrac and most other kayak track systems Includes hardware for deck mounting or attachment to the YakAttack CellBlok Lowrance fish finder, transducer, GearTrac, and LockNLoad Mounting System not included Made in the USA Made from premium materials designed for use in harsh marine environments GearTrac not included Overall length of 25.75" U.S. Pat. No 7,971,839 Made in the USA Covered by our Built for Life Guarantee SKU: FFP-1001

Engineered to elevate your fishing experience, the LeaderBoard offers an unparalleled combination of functionality and convenience. Its buoyant design ensures it floats effortlessly on water to help in the case it falls overboard and features a dedicated leash point that provides a secure attachment point to prevent accidental loss. For tournament anglers, it boasts built-in dual identifier holders, allowing you to seamlessly display your ID for catch, photo, release style tournaments. Integrated cull tabs further enhance your catch tracking capabilities, allowing you to quickly set a visual representation of the length of your recent catches. Lines and numbers were laid out as a collaborative effort with key tournament decision-makers to ensure an accurate and easy-to-read tournament experience. Our objective was to develop a fish measuring board from the ground up that maximizes convenience and usability for the consumer while improving tournament integrity by minimizing opportunities for intentional or accidental misrepresentation of the length of fish being measured. Culling Tabs One feature unique to the YakAttack LeaderBoard is the built-in culling system. Each board has a slot across the top edge with three (3) black culling tabs that slide along the increments on the measuring surface. Many kayak tournament anglers we spoke with throughout the development process who participate in catch, photo, release style tournaments mentioned spending considerable time referring back to the photos in their cell phones to the check lengths on their smallest or largest fish. This process could be more efficient for your time management on the water and could be better for a healthy, quick fish release. The culling tabs allow anglers to track their smaller fish quicker during a tournament and adjust as they progress. Are the culling tabs useful if you are not a tournament angler? Absolutely! Permanently mark your personal best across three species or your top three fish for the year. Floatation and Security The LeaderBoard comes with EVA foam inlayed on the board's underside, creating the necessary buoyancy for floatation. Ethylene Vinyl Acetate is a closed-cell structured foam that provides resistance to water and moisture, so it will hold up for many years in a wet environment. Also included in the design of the board is a built-in tether point for added security. Just because it floats does not mean it can't drift out of reach quickly in current or wind. Tether not included. Oversized Design and Geometry It’s no secret that the LeaderBoard looks different than the measuring devices that you are used to. While most boards are relatively flat, our designers focused on geometry to better accommodate the shape of the fish. On top of being wider overall, this shape cradles the fish to help achieve a more natural presentation of the fish for photography. The angled design of the measuring surface adds rigidity to the board, virtually eliminating flex and minimizes the potential of glare, allowing for more qualified catch photos. Integrated Tournament ID Holder The YakAttack LeaderBoard is equipped with an integrated dual flip-out ID holder designed around standard-sized CPR tournament ID cards of 3.75" x 2.25" used by top kayak fishing tournament trails such as Hobie BOS, Kayak Bass Fishing, and Bassmaster Kayak Series. This feature provides exceptional convenience and security, ensuring anglers can easily avoid losing or misplacing their tournament IDs. The holder securely accommodates up to two tournament identifiers, allowing anglers to display one or two IDs simultaneously. This is essential for anglers participating in multiple tournaments at the same time. It’s easy-to-operate flip-out design enables quick and effortless deployment and stowage. Anglers can now seamlessly transition between displaying their identifiers for catch photos and quickly stowing them away when finished. Furthermore, the included clear resealable sleeves provide additional protection from the elements. These sleeves keep identifiers pristine and legible, ensuring tournament judges have a clear view of the necessary information. DoubleTake Visual Indicator Tournament fishing demands precision and integrity. The DoubleTake Visual Indicator on the YakAttack LeaderBoard is a revolutionary tool that addresses both these concerns. This innovative feature eliminates the ambiguity of traditional measurement boards with its mirrored surface, doubling the gap between the fish's nose and the vertical fence. This ingenious design ensures that even the smallest gaps are impossible to miss, leaving no room for doubt or debate. Say goodbye to the frustration of accidentally submitting a picture where the fish isn't truly touching the fence. The DoubleTake Visual Indicator drastically reduces this risk, allowing you to focus on the excitement of the competition instead of worrying about potential disqualifications or deduc

The PanFish Portrait Pro™ is an updated version of the original PanFish Portrait that features a more durable construction, LockNLoad base, and new YakAttack camera ball system. The LockNLoad base offers complete 360° rotation while maintaining complete gear security. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). One of the most frustrating moments for photographers and videographers is when you purchase a camera mount and you find out it doesn't work with your GoPro (or vise versa). We solved the issue by including both a standard 1/4-20 camera ball (which fits most standard cameras) and a GoPro attachment, enabling you to get the perfect shot, regardless of the equipment you're using. The LockNLoad track mount system is the most innovative mounting system on the market, and is exactly what you'd expect from the industry leaders in track mounting technology. There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use: From locked mode, simply squeeze a lever to go into adjustment mode. In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the accessory is completely secure while making adjustments. Let go of the lever and you are back in locked mode. To go to removal mode, flip the lever out, and the system easily slides off of the track mount. The ultra-durable construction of the PanFish Portrait Pro™ is not only super lightweight - it's also incredibly rigid, reducing shake in your camera footage. Utilizes the LockNLoad™ Track Mount System for easy on and off, angled articulation, and rotational pivoting Durable, lightweight, and super rigid construction Features the new YakAttack Camera Ball For use with camera utilizing a 1/4-20 mount or GoPro Cameras 11.5" Tall Can add in LockNLoad Extensions for more height Made in the USA Covered by our Built for Life Guarantee Patent Pending SKU: CMS-1001

Depthfinder installation on kayaks just got smarter. The YakAttack CellBlok is a track mounted battery box and its top surface serves as a mounting platform for the display and transducer deployment arm. No more drilling holes in your kayak or routing wires! Simply loosen the two track mount knobs and the CellBlok allows you to quickly and easily attach or remove your depthfinder. A minimum of 10.5" of track is required to attach the CellBlok. The YakAttack SwitchBlade Transducer Deployment Arm and our line of fish finder mounts pair perfectly with the CellBlok to create a complete fish finder mounting solution. This updated version of the CellBlok is new for fall 2020 and features an injection molded construction compared to the original model. The change in material has resulted in a 25% weight reduction and we also increased the size of the cable wraps to accommodate the larger wires used in today's fish finders. Interior Space - 6.375'' long x 4.25'' wide x 2.60'' tall Exterior Dimensions - 10.25'' x 6.75'' x 3.50'' CellBlok box only with hardware to attach to GearTrac. Made in the USA Covered by our Built for Life Guarantee CellBlok weighs 1.4 lbs. GearTrac, fish finder mount, transducer arm, and display not included. Assembly required Can be attached to YakAttack GearTrac and most other kayak track systems Fish finder mount and GearTrac not included Made in the USA Popular batteries include the YakAttack/Nocqua 10ah, Dakota Lithium 10ah, and the Amped Outdoors 12ah Made from premium materials designed for use in harsh marine environments

The revolutionary forearm grip featured on the Leverage Landing Net offers unparalleled stability and control, while the hinged design allows the handle to fold alongside the net for compact and easy stowage which make the Leverage Landing Net the best net when kayak fishing. The high level of control and accuracy offered by the forearm grip means you don't need a giant hoop to net your next big fish and makes the Leverage Landing Net an essential piece of kayak fishing gear. This Leverage Landing Net has a wider, more traditionally designed hoop. Revolutionary Forearm Grip Folds for Easy Storage Full Rubber Net Wider, more traditionally designed hoop 20" X 21" Hoop 47'' Overall Length Leverage Landing Net is a registered trademark of YakAttack, LLC Netting is molded in Taiwan All other components are made and assembled in the USA Covered by our Built for Life Guarantee SKU: LLN202148

Designed to meet the needs of all anglers- from serious kayak fishermen to recreational paddlers- the VISICarbon Pro™exhibits unprecedented performance in light weight, low drag, and portability- all with plenty of style. The ultra-thin mast and instantly recognizable flag combine to offer excellent performance with low wind resistance, and enhances your visibility on the water, night and day. The VISICarbon Pro™ light is complete with an LED module, which will burn for 100 hours on 3 AA batteries (included) and provides 360° visibility. The Silent Snap flag attachment provides a secure fastening that can be left for hours, or removed in seconds. The collapsed unit fits inside the flag for easy organization, creating a convenient and portable storage solution at only 14" long. The deployed VISICarbon Pro™ is 48" long. The SilentSlip foam at the base of the unit floats, but still fits into most flush mount and tubular rod holders. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Enhances your visibility day or night. SilentSlip foam fits most flush mount and tubular rod holders. 48" long deployed, 14" collapsed. Collapsed unit stores inside flag. It floats! Designed with carbon fiber tubing for stiffness and ultra light weight. Silent Snap flag attachment system provides quick and easy flag installation and removal. LEDs burn 100 hours on 3 AA batteries (included). 10,000+ hours lamp life. U.S. Pat. No. 8,662,720 Made in the USA Covered by our Built for Life Guarantee SKU: CPM

The PanFish Pro™ is an updated version of the original PanFish that features a more durable construction, LockNLoad base, and new YakAttack camera ball system! The LockNLoad base offers complete 360° rotation while maintaining complete gear security. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). One of the most frustrating moments for photographers and videographers is when you purchase a camera mount and you find out it doesn't work with your GoPro (or vise versa). We solved the issue by including both a standard 1/4-20 camera ball (which fits most standard cameras) and a GoPro attachment, enabling you to get the perfect shot, regardless of the equipment you're using. The LockNLoad track mount system is the most innovative mounting system on the market, and is exactly what you'd expect from the industry leaders in track mounting technology. There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use: From locked mode, simply squeeze a lever to go into adjustment mode. In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the accessory is completely secure while making adjustments. Let go of the lever and you are back in locked mode. To go to removal mode, flip the lever out, and the system easily slides off of the track mount. The ultra-durable aluminum construction of the PanFish Pro™ is not only super lightweight - it's also incredibly rigid, reducing shake in your camera footage.In addition, the patented design allows for one-hand rotation without loosening or tightening the product, giving you the ability to get the smoothest pan shot. Utilizes the LockNLoad™ Track Mount System for easy on and off, angled articulation, and rotational pivoting Durable, lightweight, and super rigid aluminum construction Features the new YakAttack Camera Ball It floats! For use with camera utilizing a 1/4-20 mount or GoPro Cameras 33" Tall Can add in LockNLoad Extensions for more height Made in the USA Covered by our Built for Life Guarantee Patent Pending U.S. Pat. No. 8,979,399 U.S. Pat. No. 8,783,975 SKU: CMS-1002

The original hard-sided kayak crate just got better. A lot better. Introducing the completely redesigned BlackPak Pro. The result of intense collaboration and more than a year of R&D and design, the BlackPak Pro is fully riggable and boasts a hinged lid, 25% weight reduction, and best-in-class functionality. Enhancements include many things you might have expected, as well as some true-to-the-brand features that no one saw coming. Size The 13X13 BlackPak Pro is 13” x 13” x 13” (L,W,H) and weights in at 6.9 lbs. without TetherTubes and 8.2 lbs. with the included three TetherTubes . The BLP-PRO-13X16 is 13” x 16” x 13” (L,W,H) and weighs in at 7.6 lbs. without TetherTubes and 9.2 lbs. with the included four TetherTubes. The BLP-PRO-16X16 is 16” x 16” x 13” (L,W,H) and weighs in at 9.1 lbs. without TetherTubes and 11.5 lbs. with the included six TetherTubes. Construction and Assembly Injection-molded from UV stabilized polymers, the BlackPak Pro will last for many years, even in harsh marine environments. The ultra-stiff panels utilize a rib structure that offers exceptional rigidity with minimal weight, while their interlocking joints ensure an intuitive, frustration-free assembly process. Interlocking GridLoc panels utilize a tongue and groove edge design to make assembly a breeze. Just press them together (they won’t fall apart during assembly) and install the (included) stainless steel screws using a simple screwdriver. Hinged Lid The water shedding lid with fully adjustable hinges allows you to go from freely pivoting to a sticky setting that maintains the lid position when you let go of it, while integrated overtravel stops keep the lid within reach and limit it to a manageable angle. Sound dampening rubber bumpers ensure quiet closing of the lid, and the unique CatchLatch retention system secures the lid in a simple but surprisingly functional manner. Rod Holders The included three TetherTube rod holders with integrated but easily removable hook and tether systems ensure your rods stay put if things go wrong. Caged attachment points on both sides of the tube offer multiple hook points, and the oversized hook design is sized to attach directly to the shaft of your fishing rod if desired. The TetherTube rod holder mounts to the GridLoc panels using at least three of the four standoff pads, enabling several vertical positioning options. Mount them high for rods with long butts, or mount them low to elevate the BlackPak Pro into the HighNDry position. Tankwell Security Rubber feet offer noise dampening and isolation, while Omni corner brackets enable multiple hold-down methods. They are designed as attachment points for YakAttack OmniHooks (four of which are included), generic hooks, carabiners, or simple bungee. Storage Optimized for a wide variety of tackle boxes, including Plano 3700, Plano Edge, Bass Mafia Bait Coffin, Flambeau, and many more. Rigability The key to customizing and accessorizing the BlackPak Pro lies in the highly revolutionary GridLoc 2D mounting system, which offers a plethora of attachment points on the inside and outside of the panels. This gives our design team a platform for which they can design a myriad of dividers, holders, and other attachments. Development of these accessories is already underway! Features: 13x13 3 Rod Holders with built-in rod leashes Optimized for 3600 sized tackle boxes Fits eight 3600 Plano boxes Hinged lid with secure latches New lightweight construction GridLoc Mounting Platform located on every panel Rubberized feet and built in noise dampening features Internal dimensions (L, W, H) – 11.9” x 11.9” x 11.75” External dimensions (L, W, H) – 12.94” x 12.94” x 13.3” 6.9 lbs. without TetherTubes and 8.2 lbs. with included three TetherTubes When measuring your kayak's tankwell add 2.75" for every side you intend to attach TetherTubes Build for use in harsh marine conditions Includes stainless steel hardware Made in the USA Built for Life Guarantee SKU: BLP-PRO-13X13 Features: 13x16 4 Rod Holders with built-in rod leashes Optimized for 3700 sized tackle boxes Fits five 3700 tackle boxes Hinged lid with secure latches New lightweight construction GridLoc Mounting Platform located on every panel Rubberized feet and built in noise dampening features Internal dimensions (L, W, H) – 11.9” x 14.9” x 11.75” External dimensions (L, W, H) – 12.94” x 15.94” x 13.3” When measuring your kayak's tankwell add 2.75" for every side you intend to attach TetherTubes 7.6 lbs. without TetherTubes and 9.2 lbs. with the included four TetherTubes Build for use in harsh marine conditions Includes stainless steel hardware Made in the USA Built for Life Guarantee SKU: BLP-PRO-13X16 Features: 16x16 6 Rod Holders with built-in rod leashes Optimized

Made in the USA to a standard of quality you’ve come to expect from YakAttack; the TowNStow Bunkster Kayak Cart is built from UV-resistant, high-quality, injection-molded polymers and anodized aluminum tubing and assembled with stainless steel hardware. Designed to withstand years of use in harsh outdoor and marine environments, the TowNStow Bunkster is backed by our Built for Life Guarantee. Fixed Upright Bunks The Bunkster features two fixed uprights configured in the “bunk-style” configuration, where the bars are parallel to the hull of your vessel, which fits many hull shapes of modern-day kayaks. The uprights can easily be repositioned along the axle to maximize compatibility with different kayak widths and body lines of the hull. The axle features six bunk positions ranging from 6.25” to 16” wide. Tie-Downs and Bunk Pads Securing a kayak to the Bunkster with straps can be different for every model of kayak, so like the TowNStow BarCart, the Bunkster has multiple integrated tie-down points. Strap loops built into the wheel hubs work great for kayaks that are wider than the wheelbase of the cart, and a centralized tie-down point located at the center of the axle is excellent when transporting narrow watercrafts. The tie-down points are designed for 1” flat webbing cam straps (not included), but you can also use rope that is less than 5/16” in diameter. For added grip on the underside of your kayak, the Bunkster includes four super “grippy” rubber bumpers. For long-term durability, we opted for designing snap-on rubber bumpers instead of common foam. Wheels The wheels included are a 3-Piece BeadLoc wheel design with durable and grippy rubber thread. These tires are airless and designed for use on hard-packed surfaces. The wheels easily snap in place and are removed by a push of a button. Storage and Components Many anglers set up their kayaks in the boat ramp parking lot and then cart them to water’s edge, but taking the cart back to their vehicle is not always an option. Doing so leaves your kayak and gear unattended and susceptible to theft. The Bunkster was designed to disassemble completely and without the need for tools. The wheels remove by depressing the button behind the hub on the axle and can be done in seconds. The fixed uprights remove by lifting the orange position detent lever and sliding them off the axle. Everything minus the centralized tie-down point can be removed from the aluminum axle, leaving you with five parts that can be stored in most hatches. The Bunkster comes with two kickstands, configured with one on each side to optimize and support the loading angle for both sides of the cart. When not in use, the beefy kickstands snap in place, locked out of the way. Wheels are designed for use on hardpacked surfaces (this is not a sand tire) Made in the USA Lifetime Warranty Tool-less adjustment with no loose parts Designed for use with 1” cam straps (straps not included) Made from UV-resistant polymers, anodized aluminum, and stainless steel Easily adjustable 6 adjustable width positions; Max 16”, Min width 6.25” Wheels remove by a push of a button Multiple integrated tie-down points All touch-points are highlighted using orange polymers Dual Kick-Away Kick Stands Rubber bunk pads 3-Piece BeadLoc Wheel Design Quick-release components to quickly stow the cart Built for use in harsh marine conditions Weight: 11 lbs. 1 oz. Wheel size – 12” diameter, 2.5” wide Axle Length: 26.5” Weight Capacity - Flat surface rating: 450 lbs., Trail rating: 300 lbs., 5 inch drop rating: 200 lbs. SKU: TNS-1002 UPC: 819731015982

Command the water with the YakAttack CommandStand™! Designed to fit most kayaks with or without a track system, the unique crossbar design allows you to adjust the width of the CommandStand™ for a perfect fit on most kayaks. Assembles with one hex key (included), but the pin-and-tether design means no tools are needed to deploy, lay down, or break down the CommandStand™ for stowing. More than just a stand-assist bar, the CommandStand™ offers all of the features of a standup fishing station! Two RotoGrip Paddle Holders mean your paddle is there when you need it and out of the way when you don’t. Two MightyMount Bar Clamps allow you to attach any YakAttack accessory utilizing a single t-bolt, including rod holders, cup holders, camera mounts and more. Pull 2 pins to lay down on the forward deck of your kayak, and pull 6 pins (4 at the base and 2 at the crossbar) to break the unit down to a tidy bundle, ready to stow in the mesh carrying bag (included). Made in the USA from premium materials for a lifetime of use in even the harshest environments. Anodized Aluminum UV Stable Polymers Coated and Uncoated Stainless Steel Hardware Adjustable Width Can be mounted to tracks or any flat surface All necessary hardware included Includes accessory kit 2 RotoGrip Paddle Holders 2 MightyMount Bar Clamps for attaching accessories Mesh carrying bag with shoulder strap Patent Pending Made in the USA Covered by our Built for Life Guarantee SKU: SAP-1001

After 18 months of intense development, the YakAttack design team has truly redefined the kayak cart category. Combining best-in-class quality and durability with never-before-seen features and functionality, the TowNStow BarCart is one of the most highly engineered and versatile products we’ve ever produced! Designed for extreme duty, the BarCart is universal, collapsible, user-friendly, and robust, requiring no tools to assemble or disassemble. Nothing about this design is what you’d expect, but your expectation will never be the same after using it. With the push of a button or the flip of a lever, the BarCart can be deployed, adjusted, or collapsed in seconds. And with two bunk bar configurations, it boasts unprecedented compatibility with different hull shapes. Made in the USA to a standard of quality you’ve come to expect from YakAttack; the BarCart is built from UV-resistant, high-quality, injection-molded polymers and anodized aluminum tubing and assembled with stainless steel hardware. Designed to withstand years of use in harsh outdoor and marine environments, the BarCart is backed by our Built for Life Guarantee. Bunks and Tie Downs With the vast and ever-evolving shapes of modern-day kayak hulls, we knew our bunk system would require extreme versatility. When we found that inline bars worked better on some boats while crossbars worked better on others, we decided to build both options into the BarCart. You can transport “roof rack style,” putting the bars in a crossbar configuration for boats with pontoon-shaped or reasonably flat bottoms, or you can configure them in a traditional “bunk-style” configuration, where the bars are parallel to the hull of your vessel, for kayaks with more of a “V” shaped hull. In this configuration, the bars can be locked into 6 different positions, depending on your boat’s width and the shape of its hull. Securing a kayak to the BarCart is not a one-size-fits-all proposition either, so we added a number of different tie-down points. Strap loops integrated into the wheel hubs work great for kayaks that are wider than the wheelbase of the cart, and a centralized tie-down point located at the center of the axle is great when transporting narrow watercrafts. The tie-down points are designed for 1” flat webbing cam straps (not included), but you can also use rope with less than 5/16” diameter. For added grip on the underside of your kayak, the BarCart includes four super “grippy” and easily positionable rubber bumpers. For long-term durability we opted for designing snap-on rubber bumpers instead of standard foam. Storage and Collapsible Components So, you’re at the launch, now what? Sometimes it’s not convenient to take your cart back to your vehicle, and doing so leaves your kayak and gear unattended and susceptible to theft. We solved this problem by making the BarCart ultra collapsible. The wheels can be removed with the push of a button. The bunk bars, long enough for even the widest fishing kayaks, collapse with a heavy-duty ferrule and bungee system, enabling them to go from a 44” deployed length to less than 18” in a compact and secure package. The uprights fold down, parallel with the axle, making it possible to store the BarCart inside the hull of a kayak. All of this can be performed with no tools using smart and simple buttons and levers. If needed, everything minus the centralized tiedown point can be removed from the aluminum axle. Wheels The wheels included are a 3-Piece BeadLoc wheel design with durable and grippy rubber thread. These tires are airless and designed for use on hard-packed surfaces. The wheels easily snap in place and are removed by a push of a button Dual Kickstands The BarCart comes with two kickstands. When configured with one on each side, you can optimize and support the loading angle for both sides of the cart. When not in use, the beefy kickstands snap in place, locked out of the way. Made in the USA Built for Life Guarantee Wheels are designed for use on hardpacked surfaces (this is not a sand tire) Universal fit for most kayaks or SUP’s Toolless adjustment with no loose parts Designed for use with 1” cam straps (straps not included) Made from UV resistant polymers, anodized aluminum, and stainless steel Easily adjustable 6 adjustable width positions when in the bunk orientation Bars can be positioned bunk style or roof rack style Crossbars detach quickly and easily by a simple flip of a lever Wheels remove by a push of a button Multiple integrated tie down points All touchpoints are highlighted using orange polymers Dual Kick-Away Kick Stands Positionable rubber bunk pads 3-Piece BeadLoc Wheel Design Uprights fold in seconds for easy storage Quick release components to quickly stow the cart Built with stainless steel Hardware Built for use in harsh marine conditions Weight Capacit

The Targa 130T Tandem Sit-on-top Kayak is the ultimate choice for versatility, space, and comfort. The open design and intuitive multiple position seat systems allow for an optimal experience on the water with friends, family, pets, or even by yourself. The camp-style seat system delivers maximum comfort, and the elevated stern seat provides greater visibility when paddling. This kayak is loaded from front to back. The hooded bow storage area keeps your belongings accessible and sheds water to help keep things dry. Integrated into the rear deck is a portable insulated cooler that keeps food and drinks cold for hours on end. Length: 156 in - 396.24 cm Height: 14.5 in - 36.83 cm Width: 36 in - 91.44 cm Weight: 99 lb - 44.91 kg Max Weight Capacity: 450 lb - 204.12 kg

The Origin Glass Touring Paddle offers the ideal paddle shape for all-around touring. This paddle is designed to enhance stroke efficiency and boat control. It’s perfect for day trips as well as longer excursions. Paddlers can customize both the length of the shaft and the degree of feathering with the simple flip of the lower-profile lever. Adjustability also enables family members of different sizes to use the paddle comfortably. Adjustable Size – 220cm base length expandable up to 240cm Paddle Weight: 35 oz Works well with any touring kayak A strong and durable high-angle blade design delivers plenty of purchase to maximize boat control and propel even the heaviest kayaks Designed to deliver enhanced stroke efficiency and boat control Two-piece construction breaks down for easy transport and storage Suitable for day trips as well as longer, multi-day excursions Works well for beginners and more experienced paddlers With a simple flip of the low-profile lever, the Origin Touring paddle can be adjusted to fit virtually any paddler or seat position.

The Kayak Krate sophisticates the tankwell storage experience with a superior functional interface and sleek look never before seen in a fishing gear storage crate. An open main compartment accommodates larger gear and tackle boxes, while smaller items can be stowed in the secondary lid storage. Functional and durable inside and out, the Kayak Krate is blow-molded, water resistant is easily lashed within a tankwell, and comes standard with four rod holders. Large main compartment Lid serves as additional storage Comes standard with four (4) rod holders Blow-molded for durability Water resistant when latched closed Universal lash down points No assembly required Comes with brackets to raise the position of the rod holders to accommodate narrow tankwells Weight = 10.9 lb Capacity = 29 L Height = 13.25” Width = 12.25” Depth = 18”

The Targa 100 sit-on-top recreational kayak from Wilderness Systems is your ticket to freedom. Perfect for day trips, it offers the right balance of comfort, stability, and carefree spirit. The new sling-style seat is comfortable, breathable, and adjustable. There is plenty of room to stretch out with a wide-open floor — and we even included a heel pad so you can kick back and relax. The hull is stable so you can paddle with confidence and ultimate ease wherever your adventures take you. This sit-on-top kayak is designed with premium features like an integrated, removable cooler that is easy to access from your seat and take along with you for a lunch break ashore. You will also enjoy plenty of storage options like a hooded bow storage area to keep your belongings in one place while also offering splash protection to help keep you dry. There’s also an open, bungee-equipped, rear storage deck to keep extra gear secure in the back. Four rigid handles and two molded in-stern handles make this recreational kayak easy to carry, and the rack notch helps keep the boat in place for easy loading on a roof rack. So, go ahead and take the Targa 100 for a spin to see where it can take you. Lightweight Design: At 10'3"" and weighing only 57 lb, the Targa 100 is an easy grab-and-go kayak that you can throw in the back of your pickup or secure to the roof rack of your hatchback with ease thanks to the integrated rack notch. Rigid carrying handles also make getting in and out of the water a breeze. Length: 10' - 0" Width: 32" Weight: 57.5 lb Capacity: 325 lb

The sit-on-top legend – revitalized and refined. How do you improve upon a legend? Introducing the New Tarpon. Retaining everything paddlers love from the celebrated original with improved comfort, stability, speed and paddler interface, the new Tarpon is easily the most versatile boat in the Wilderness Systems lineup that is equally at home on rivers, lakes or oceans. Every detail is carefully crafted and executed flawlessly to bring you boundless paddling perfection. The premiere sit-on-top kayak is now even better and more comfortable Fast, efficient and straight tracking Excellent stability - great initial stability and solid secondary stability when the boat is leaned on edge Dog-friendly - bring Fido along for the ride The most comfortable and adjustable Phase 3® AirPro seating system featurs CoolTouch so your seat stays cool Large rear storage well for crates, coolers, fishing equipment, scuba tanks & camping gear Front storage hatch offers dry storage Mesh cover for rear storage area to secure items - can be rolled back Sectioned storage tray to organize smaller items like sunscreen, fishing lures and snacks User-friendly paddler interface - new features including a water bottle strap and dry box are all within easy reach MagnaTec magnetic water bottle strap system DryTec removable dry box is perfect for storing wallets, phones, keys and other valuables SlideTrax™ accessory rails so you can customize your kayak for fishing, filming or adding other accessories Quick park paddle holder Rigid carry handles for easy transport Specifications: Length: 10' 6" / 320 cm Width: 32" / 81 cm Boat Weight: 55 lbs. / 25 kg Deck Height: 15.25" / 39 cm Max Capacity: 325 lbs. / 147 kg

Paddling. Perfected. Pungo. Blending celebrated legacy design elements with a re-imagined modern flair, the updated Pungo delivers a dynamic on-water performance with superior stability, unmatched speed, premium comfort and intelligent outfitting. The renowned Pungo hull, through rigorous engineering and testing, has reassuring stability without sacrificing performance. Best-in-class speed makes the Pungo the easiest to paddle and most efficient kayak in its class, taking you farther and faster than you ever thought you could. The patented Phase 3® AirPro seating system is the core of what makes Wilderness Systems the world’s most comfortable kayaks; the Pungo’s comfort and adjustability is built just for you, allowing you to be fully immersed in your on-water experience. The Pungo also integrates the most comprehensive kayak dashboard interface for optimal customization and features. It includes the removable DryTec dry box that allows you to take your valuables with you, two cup holders for your favorite beverage, a recess for the Wilderness Systems Lithium Battery (sold separately), SlideTrax ™ to hold mounts for phones, fishing rods and other accessories, and two mounting platforms for customized accessorizing. A protective and replaceable skid plate, comfortable rigid carry handles, industry-leading storage capabilities, and configurable deck bungee rigging rounds out a robust list of attributes. Through skillful engineering, the new Pungo features a size for everyone – a 10.5 foot model is a compact package designed to fit a variety of paddlers, a 12 foot model accommodates small and medium sized paddlers, and a 12.5 foot model for a large fit. Specifications: Length: 12' 2" / 371 cm Width: 29" / 74 cm Boat Weight: 49 lbs. / 22 kg Cockpit Length: 57" / 145 cm Cockpit Width: 22" / 56 cm Max Capacity: 325 lbs. / 147 kg

Great on flat or slow moving water, the versatile Aspire combines easy handling and maneuverability with great stability. The Aspire is a high-performance sit-inside recreational kayak with endless possibilities. Designed for the beginner to intermediate paddler looking to expand beyond flat-water, the versatile Aspire combines easy handling and maneuverability with unsurpassed stability and features the TruTrak Adjustable Skeg System for straight tracking on longer pursuits. Industry-leading Phase 3® AirPro seat outfitting provides ultimate comfort, adjustability and breathability. Specifications: Length: 10' 6" / 320 cm Width: 29" / 74 cm Boat Weight: 48 lbs. / 22 kg Deck Height: 15.5" / 39 cm Cockpit Length: 51.5" / 131 cm Cockpit Width: 23.5" / 60 cm Max Capacity: 400 lbs. / 181 kg

Experience true innovation in motion with the Helix PDTM Pedal Drive. Featuring a 6:1 gear ratio precision-tuned to a 14 x 17 two- bladed fixed pitch prop, the Helix PD is the most efficient and intuitive pedal system ever engineered. Fully deployed, the system is optimized for maximum speed in exchange for less effort so you can be hands-free to fish all day. A groundbreaking auto-raising mast achieves zero draft with a spring-loaded kick pedal, and the unit can be further stowed forward and out of the way to complete the 3-phases of possible positioning. Tuned to the proven performance of Wilderness Systems’ S.M.A.R.T. Hull designs, and compatible with the Radar model family, the Helix PD Pedal Drive is the definitive advantage.

Experience true innovation in motion with the Helix PD Pedal Drive. Featuring a 6:1 gear ratio precision-tuned to a 14 x 17 two-bladed fixed pitch prop, the Helix PD is the most efficient and intuitive pedal system ever engineered. Fully deployed, the system is optimized for maximum speed in exchange for less effort so you can be hands-free to fish all day. A groundbreaking auto-raising mast achieves zero draft with a spring-loaded kick pedal, and the unit can be further stowed forward and out of the way to complete the 3-phases of possible positioning. Tuned to the proven performance of Wilderness Systems’ S.M.A.R.T. Hull designs, and compatible with the Recon 120. Optimized for all-day cruising and hands-free performance Three-position pedal drive: fully deployed zero draft fully stowed Versatile kayak steering system: rudder kit steering kit noise reduction baffles

Pamlico 145T tandem kayak offers you and a friend superb maneuverability and easy entry and exit. The best-selling Pamlico series of tandem kayaks offer performance for pairs. Featuring a signature rounded hull that delivers swift acceleration, helping you paddle longer distances faster, as well as superb maneuverability for easy entry and exit. The Phase 3® AirPro tandem outfitting system offers upgraded adjustability options for more comfort and customization. Converts to solo use with ease for a great day on the water. Specifications: Length: 14' 6" / 442 cm Width: 31" / 79 cm Boat Weight: 73 lbs. / 33 kg Deck Height: 16" / 41 cm Cockpit Length: 90" / 229 cm Cockpit Width: 22.75" / 58 cm Max Capacity: 550 lbs. / 249 kg

The Fit Child PFD is a high mobility vest for paddling, general boating and personal watercraft use. The sculpted front and back foam panels create a more appropriate fit for paddle sports, while still providing the ability to be used in other boating activities. Features Maximum Mobility Sculpted foam paneling designed with a non-restrictive cut for maximum mobility. Thinner back panel helps eliminate interference with high seat backs. Easy Entry A simple three-buckle front entry design makes the Fit easy to get on quickly. Universal Adult Size One size fits all unisex adult vest. Type III PFD With sea level buoyancy of 16-18 lbs.