Kayak Catalog

The YakAttack Stealth Pulley is engineered to be the most quiet, low profile, shielded, and snag free pulley ever created for kayaks. Designed for use with anchor trolleys but great for many other applications. Teflon infused, wear resistant nylon rollers offer quiet, smooth operation and extreme durability for a lifetime of use. The shielded, snag-proof housing protects the rollers from docks, stumps, and other obstacles you may encounter on the water. 2 Pack Hardware Included Features same hole pattern as Hobie and Harken pulleys Made in the USA Covered by our Built for Life Guarantee

The YakAttack Track Mount Vertical Tie Downs come with a Mighty Bolt base. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Perfect as an anchoring point to secure a cooler or any other accessory to the track. Designed to work with 1'' and 1.5'' flat webbing and can also be used with bungee. Made in the USA from premium materials for a lifetime of use in even the harshest environments. Sold in a 2 pack. Patent Pending Made in the USA Covered by our Built for Life Guarantee SKU: AAP-1025

Don't take a bath in your boat! A swamped craft is as dangerous as it is uncomfortable. The floating NRS 21" bilge pump can bail out your boat and bail you out of a bad situation in no time. The NRS bilge pump makes it easy to remove unwanted water from any open boat. No hose necessary as the water will spray out over the side of your kayak or canoe. The full length foam float ensures it won't sink if you drop it in the water. Pumps 8 gallons per minute for quick emptying of your boat. Bright color makes it easy to find, even in dim lighting. Stainless steel screws reduce rust build-up.

Protect your boat, truck, trailer or ATV while securing loads with the NRS Buckle Bumper Strap. The removable rubber guard adds bounce to the buckle to prevent unhappy accidents. Beneath the bumper is the same burly NRS cam buckle that has set the standard for strength and reliability since 1978. Born on the river, ready for whatever—the NRS Strap is renowned worldwide for its extraordinary strength and usefulness. 1" wide polypropylene webbing is rated at 1,500 lbs. Minimum Breaking Strength (MBS), won't stretch when wet and is treated for protection against UV degradation. Polyurethane bumper wraps the buckle in 360-degree protection without interfering with its operation. Dual stainless-steel springs in our custom cam buckle create a strong, even bite that won't slip, ever. We call out the strap size boldly on the buckle so there's no guessing which to grab. Our Iconic Blue straps also have the size woven into the webbing. Protect your straps against long-term borrowers (you know who they are) by writing your name and contact info on the woven label below the buckle. With a hidden bottle opener on the buckle, you can secure your haul and stay hydrated too. All sizes sold in pairs.

The NRS Dri-Stow Dry Sacks balance durability with affordability. Plus, the clear vinyl construction makes it easy to find what's inside. 17 oz. vinyl is tough enough to withstand seasonal abuse but keeps the price low for the inevitable replacements. Clear vinyl construction makes it easy to quickly identify the contents of the bag, eliminating the 'dry bag dive.' StormStrip™ closure system coupled with heavy-duty plastic buckles deliver a watertight seal and a convenient carry handle. One D-ring on the quick-release buckle provides a handy attachment point. Offered in a variety of sizes perfect for compartmentalizing gear inside bigger dry bags. We do not recommend using NRS Dri-Stow Dry Sacks for expensive electronic equipment.

The Black YakAttack Trucker Hat features a medium high profile with the YakAttack logo and a sleek, every day look. The mesh back helps keep you cool during warm summer days. The unique elastic/Velcro closure makes for a great fitting cap and also helps maintain a snug fit so your hat won't blow off your head during high winds.

Drop your gear in the bag, fold down that watertight closure and forget about it. Professional outfitters around the globe rely on NRS Tuff Sacks to keep gear dry all season long, season after season. The heavy-duty PVC-Free TobaTex material combined with welded seams result in a rugged, waterproof bag that will keep your gear dry and withstand the seasonal use and abuse. Designed in a variety of sizes, the Tuff Sack can fit everything from sunscreen and on-the-boat essentials, to clothing for a week off-the-grid. Exclusive to NRS, the StormStrip™ closure system coupled with heavy-duty plastic buckles provide a watertight seal and a convenient carry handle. A D-ring on the quick-release buckle provides a handy attachment point.

Quickly adapt to conditions on the water with the NRS H2Ozone Neck Gaiter. Its lightweight technical fabric and do-it-all design provide versatile protection from sun, bugs and chill. 6.3 oz. nylon/spandex fabric breathes freely and wicks moisture away while delivering UPF 50+ sun protection. Small, laser-cut holes around the mouth and nose release excess moisture preventing condensation build up on glasses. Stretchy material can be pulled up around the face for extra protection.

Don't let your outdoor gear get jacked. Get the NRS Vigilante Cable Lock instead. The coated steel cable slips easily through odd-shaped spaces so you can lock up kayaks, bikes and other gear. We coated the 10' x 1/8" diameter strong steel cable with scratch-free, rust-free nylon for durable, worry-free security. Unlike many cable locks, the Vigilante features narrow cable ends that fit easily through small and odd-shaped spaces. Secure three-digit combination lock for peace of mind. Resettable lock lets you choose and change your combination.

Add a whole new level of versatility to your kayak, canoe, power boat, ATV, ORV, tractor, or other vehicle with the GT90 GearTrac from YakAttack! This medium duty surface mount track provides a platform that's not only adjustable, but fully configurable, enabling unparalleled versatility for accessory mounting! Includes #8-32 socket drive button head stainless steel screws plus nuts and washers. The optional FullBack backing plate provides easier installation and increased security. 3/32 hex wrench not included. Designed for harsh marine environments Compatible with 1/2" wide track hardware Hole spacing 1-3/4" 0.90" wide x 12" long U.S. Pat. No. 9,671,060 B1 Made in the USA SKU: GT90-12

After years of using the standard rod tube on the YakAttack BlackPak, we knew it was time to add our YakAttack flair and design a product that was worthy of the YakAttack name. The TetherTube was modeled after our popular AR Tube Rod Holder and works flawlessly with spinning and casting rods. The angled lead-in at the top of the TetherTube makes it a breeze to insert your rods and helps lock in your casting and spinning reels keeping them aligned and ready. For added security, the integrated but easily removable hook and tether systems ensure your rods stay put if things go wrong. Caged attachment points on both sides of the tube offer multiple hook points, and the oversized hook design is sized to attach directly to the shaft of your fishing rod if desired. The Tether Tube is compatible with the BlackPak Pro but will not work with the classic BlackPak. Made from marine grade polymers, the Tether Tube is built to last and comes with our Built for Life Guarantee. The included hardware kit allows for installs on the BlackPak Pro or applications where a nut and washer are needed. Sold as a two pack Includes the integrated hook and tether Compatible with spinning and casting rods Hardware included Only compatible with the BlackPak Pro, not the classic BlackPak Made from marine grade polymers Made in the USA Covered by our Built for Life Guarantee

Additional safety for any dog that spends time near the water. The NRS Canine Flotation Device gives you peace of mind by providing extra flotation for your best friend. Simple design fits snug and secure without interfering with the dog's normal activities. This dog life jacket comes in multiple sizes to fit your furry friend. Our heaviest 1000-denier Cordura® shell is tough enough to withstand years of canine abuse. Three NRS buckles secure the vest with five total adjustment points at the waist and neck. A grab handle on top of the vest works great for getting your pet back into the boat and for retrieving tired dogs. A rugged leash ring allows you to use the vest as a walking harness or for attaching a strobe light. It has reflective safety tape for extra visibility. A zippered pocket stows your leash or snacks.

Ready-to-use 24g CO2 cartridge for immediate re-arming Single-use CO2 cartridge, ensuring effectiveness Includes an arming indicator tab for readiness check Essential safety addition for extended water trips Designed for NRS Zephyr and NRS Matik PFDs

The Fit Child PFD is a high mobility vest for paddling, general boating and personal watercraft use. The sculpted front and back foam panels create a more appropriate fit for paddle sports, while still providing the ability to be used in other boating activities. Features Maximum Mobility Sculpted foam paneling designed with a non-restrictive cut for maximum mobility. Thinner back panel helps eliminate interference with high seat backs. Easy Entry A simple three-buckle front entry design makes the Fit easy to get on quickly. Universal Adult Size One size fits all unisex adult vest. Type III PFD With sea level buoyancy of 16-18 lbs.

It’s time for rod organization to take center stage. For years forward rod staging has fallen a little short. Many kayak manufactures have designed geometry in the kayak’s hull or the front hatch for rod staging, but none have really risen to the occasion. The CenterStage Rod Stager is a track mounted forward rod stager designed for use with up to four rods that utilizes our LockNLoad system to attach to your kayak’s track. From there you get the full maneuverability that the LockNLoad system offers, plus the adjustability of our new ClickTrac Rail system. The integrated ClickTrac Rail on the bottom of the stager allows you to adjust side to side with a click of a button to achieve the desired position. The CenterStage Rod Stager is made from Injection-molded, UV stabilized polymers, that will hold even in harsh marine environments. Sold as a single pack Includes the LockNLoad Mounting System For use with up to four rods Can be used horizontally or vertically Track Mounted Patent Pending Made in the USA SKU: RHM-1008 UPC: 819731016804

The YakAttack Cam Straps are an essential for any kayak angler. The high-quality polyester webbing has a higher break strength, superior resistance to abrasion, less stretch, better UV resistance, and increased water resistance compared to common polypropylene straps sold by most companies. The custom rubber buckle cover helps prevent dents and scratches while car topping. Sold in a 2 pack 6 ft. long 1 inch wide webbing Made with high-quality polyester webbing Custom rubber buckle cover Buckle and webbing are made in China Buckle cover and sewing are done in the USA SKU: YEP-1006-06-2PK 9 ft. long 1 inch wide webbing Made with high-quality polyester webbing Custom rubber buckle cover Buckle and webbing are made in China Buckle cover and sewing are done in the USA SKU: YEP-1006-09-2PK

Introducing the YakAttack 16” x 19” Landing Net. Whether you’re fishing from a kayak, boat, or the bank, this landing net delivers a great mix of functionality and durability, making your catch-and-release experiences seamless and hassle-free. This net is designed for anyone from new anglers looking for a quality option that won’t break the bank to professional guides who demand reliability and performance. From largemouth bass to inshore redfish and trout the net opening of 16” wide x 19” long x 11” deep can accommodate a wide variety of fish species. Designed with conservation in mind, the soft rubber netting gently cradles your catch while minimizing the risk of injury to delicate skin and scales. The rubber material is snag-free, preventing hooks from getting embedded and tangled, allowing for a smooth and stress-free hook removal process. The rubber netting is easy to clean, ensuring your net stays fresh and ready for your next trip. The net features a lightweight anodized aluminum 24” handle. For storage and transportation, the handle collapsed down to an overall length of 36” and when in use measures 56.75” when extended. Made from high-quality materials, the YakAttack landing net is built to withstand the rigors of saltwater and freshwater fishing. Its lightweight design ensures easy transport and maneuverability without compromising strength or reliability, making it an essential tool for a successful trip on the water. Hoop size: 16” wide x 19” long x 11” deep 35.5" specs Collapsed length: 36” Expanded Length: 56.75” Product weight: 1.6 lbs. 24" specs Collapsed length: 29.5” Expanded Length: 45.25” Product weight: 1.4 lbs. Rubber netting Made from anodized aluminum Floats if dropped overboard Made in China 1 year warranty SKU: NAT-1002 UPC: 819731017184

The Omega Rod Holder attaches to your kayak, boat, or other watercraft with YakAttack’s brand new LockNLoad mounting system, and is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use: - From locked mode, simply squeeze a lever to go into adjustment mode. - In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you back in locked mode. - To go to removal mode, flip the lever out, and the system easily slides off of the track mount. Made in the USA Covered by our Built for Life Guarantee Patent Pending SKU: RHM-1001

The Fit PFD is a high mobility vest for paddling, general boating and personal watercraft use. The sculpted front and back foam panels create a more appropriate fit for paddlesports, while still providing the ability to be used in other boating activities.

The Fit Youth PFD is a high mobility vest for paddling, general boating and personal watercraft use. The sculpted front and back foam panels create a more appropriate fit for paddlesports, while still providing the ability to be used in other boating activities.

In typical YakAttack fashion, what started as an idea for a single offset RotoGrip Paddle Holder resulted in a product with a bit more versatility. The DoubleHeader track mount can serve several different purposes, but in this case, it is the foundation for the perfect offset paddle holder solution that our customers have been dreaming of ever since the launch of the RotoGrip several years back. Compatible with standard diameter kayak paddles the RotoGrip Paddle Holder has become the most widely used paddle holder in the industry. The RotoGrip is a simple yet highly effective paddle holder solution, but many paddlers wanted to use one or two RotoGrips on a single side of the kayak. When using two RotoGrips on a single piece of track, you get a nice tight hold, but you also cover up the entire length of the track with your paddle, rendering open track space useless. The DoubleHeader in this configuration eliminates that problem entirely and offsets the paddle holders off the kayak allowing for the full functionality of the remaining track space for other accessories. If you are tight on track space, the DoubleHeader includes an additional feature to add LockNLoad accessories like YakAttack rod holders, camera mounts, and more. Simply replace the stock knob from the DoubleHeader with the LockNLoad base of a rod holder or other accessories, and you are able to have multiple attachments on a short section of track or a single point of attachment like a MightyMount II. The DoubleHeader track mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track. Included with the DoubleHeader are two different Track Disk. These two Track Disks are designed to provide a snug fit in either the standard YakAttack GearTrac (GT90, GTSL90, GT175, MightyMount XL) or the wider opening of the YakAttack Top Loading family of GearTrac (GTTL90 and GTTL175). If a track system came included with your kayak, try both of them and determine which one will provide the best fit. For added paddle security, included with the DoubleHeader and RotoGrip’s are two SnapNStrap Security Tethers. To secure your paddle unhook the bungee tab from the stored position on the base of the DoubleHeader, wrap it around the shaft of your paddle, and loop it over the tab on the outward side of the RotoGrip. This feature will come in handy for kayakers using pedal drive kayaks like a Hobie or motors like a Torqeedo or MotorGuide. In those situations, a paddle might not be needed all the time, so the security tethers provide extra peace of mind knowing your paddle is safe and sound. If you need quick access to your paddle at a moment's notice, the tethers have a stored position, so they do not get in the way when inserting or removing your paddle from the dual RotoGrips. The DoubleHeader with Dual RotoGrip Paddle Holders is made in the USA from marine grade polymers and is backed by our Built for Life Guarantee. Made in the USA Built for Life Guarantee Single point of attachment LockNLoad Compatible Includes two RotoGrip Paddle Holders Includes two SnapNStrap Security Tethers Includes two sizes of Track Disks Perfect for anglers with pedal kayaks or motors Compatible with standard diameter kayak paddles DoubleHeader is 8.25” wide The DoubleHeader track mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track.

Secure your kayak fishing gear without bulky leashes or floats using the YakAttack Track Mount Retractor. This super versatile unit combines the innovation you've come to expect from YakAttack and genuine T-Reign retracting mechanism, 36" Kevlar cord, and a removable 4" tether. Designed for track mounting, this kit comes complete with everything you need, and is compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). GearTrac not included. UV Resistant High Density Polyethylene 36" Kevlar Cord Removable 4" tether Patent Pending Made in the USA Covered by our Built for Life Guarantee SKU: RET-1002

The VISIFlag™ from YakAttack is a 52" tall flag pole offering enhanced daytime visibility. It fits in most tube-style rod holders. For day and night time visibility enhancement, check out the VISICarbon Pro™. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). 52" Tall Highly Visible Fits in to most tube style rod holders Made in the USA Covered by our Built for Life Guarantee SKU: VFP-1001 Vinyl used in this product is phthalate free and CSPAI compliant.

The Brook lifejacket is a comfortable and stylish option for designed for women. Its the perfect PFD for recreational paddling or boating. Features - Women's Specific general boating PFD - Supportive inner cups - Adjustable shoulders for a customized fit. The adjustable shoulders allow female paddlers to place the PFD, and interior cups, in the correction position on their torso - Approved for paddling, general boating, and for use on personal watercraft - Thinner back panel helps eliminate interference with high seat backs - Sculpted foam paneling offers increased mobility - Easy to adjust, three buckle front entry - Lightweight buoyancy foam - USCG Approved

This is a truly universal solution that works flawlessly with spinning, casting, larger conventional reels, and yes – even fly rods of all sizes. A 360 degree rotating collar offers the ability to quickly secure the rod by capturing the reel, and allows spinning reels to be stowed in the natural downward position, not hung off the side. Multiple modes allow anglers to easily stage rods for quick access or lock them in for maximum security. The Omega Pro adds an extension arm to help get your reel higher off the water or helps accommodate longer rod butts. The Omega Pro attaches to your kayak, boat, or other watercraft with YakAttack’s brand new LockNLoad mounting system, and is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use: - From locked mode, simply squeeze a lever to go into adjustment mode. - In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you are back in locked mode. - To go to removal mode, flip the lever out, and the system easily slides off of the track mount. This piece of mechanical brilliance is sure to make the LockNLoad the preferred mounting system of kayak anglers for 2018. GearTrac not included Made in the USA Covered by our Built for Life Guarantee Patent Pending SKU: RHM-1002

The YakAttack Advanced Rod Tube™, new for 2019, is our take on the classic tube-style rod holder designed for spinning and casting rods and reels. It features a gimbal lock that flips into place to accommodate longer rods as well as multiple attachment points on the bottom side for rod leashes, increasing gear security. Made from marine grade polymers the AR Tube is built to last and comes with our Built for Life Guarantee. The AR Rod Tube is track-mount ready, and features the LockNLoad™ Mounting System. The LockNLoad system offers unrivaled track-mount security, but its also incredibly easy to adjust through its patented pending design. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). The AR Tube attaches to your kayak, boat, or other watercraft with YakAttack’s brand new LockNLoad mounting system, and is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit. There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use: - From locked mode, simply squeeze a lever to go into adjustment mode. - In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you are back in locked mode. - To go to removal mode, flip the lever out, and the system easily slides off of the track mount. This piece of mechanical brilliance is sure to make the LockNLoad the preferred mounting system of kayak anglers for 2018. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). GearTrac not included Made in the USA Covered by our Built for Life Guarantee Patent Pending SKU: RHM-1003

The YakAttack Zooka II™ Rod Holder is based off our top selling Zooka Tube which we sold for a number of years. It was one of the first rod holders on the market to look different and function differently with no moving parts on the body of the rod holder and used the specific geometry of spinning and casting rods and reels to lock your gear in place without having to move or secure rotating collars or straps. The new and improved Zooka II features the highly popular LockNLoad™ Mounting System and includes a 4" extension similar to the Omega Pro Rod Holder. Compared to the original Zooka Tube, we have altered the size and geometry of the Zooka II Rod Holder to better accept larger conventional gear and will accommodate just about any rod other than a fly rod. For everyone that enjoyed using the old Zooka Tube or even currently uses it this one is for you and we know you will enjoy the updated, improved, and more secure YakAttack Zooka II Rod Holder. The Zooka II attaches to your kayak, boat, or other watercraft with YakAttack’s brand new LockNLoad mounting system, and is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit. There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use: - From locked mode, simply squeeze a lever to go into adjustment mode. - In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you are back in locked mode. - To go to removal mode, flip the lever out, and the system easily slides off of the track mount. This piece of mechanical brilliance is sure to make the LockNLoad the preferred mounting system of kayak anglers for 2018. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). GearTrac not included Made in the USA Covered by our Built for Life Guarantee Patent Pending SKU: RHM-1004

Featuring a shorter paddle shaft and smaller blades, the Hi Five Paddle is sized specifically for younger paddlers. This paddle also features a smaller diameter shaft for smaller hands. it will offer a more comfortable fit for kids than a standard, adult paddle. It is generally well-suited to paddlers under 5 feet tall. Also, this paddle is really two paddles in one! It's a kayak paddle that can easily be converted to a standup paddleboard paddle by detaching one of the blades and attaching the 3rd piece which is a shaft with a hand grip for SUP paddling. Additionally, kids can change the angle of their blade just like the grown-ups do. This paddle works perfectly with the Hi Five Kids Kayak but will also allow your children to more comfortably paddle other smaller SUP boards or kids/smaller kayaks. Note: photos shown are renderings only and this paddle will have a silver (not black) shaft Optimized for the Perception Hi Five kayak Compatible with any kids’ kayak and smaller SUP boards 190cm long (vs. 230cm for average adult paddle) Smaller (425cm2) blade for easy strokes Small diameter shaft sized for smaller hands 3-position push-button ferrule connection (60/0/60) in center of paddle shaft - enables adjustment of the blade angle known as feathering Paddle Weight: 1.67 lbs Materials: Fiberglass-reinforced polypropylene blades Corrosion-resistant anodized aluminum

The first anchor trolley designed specifically for the job, the YakAttack LeverLoc™ Anchor Trolley features a LeverLoc™ line clamp, which locks your trolley line in place with a simple “flip of a switch” motion. Keeping the trolley lines in line is the PadHook, a simple but clever design that combines the functionality of both a pad-eye and a hook, keeping even the tightest trolley lines in place on the side of the kayak, not over your gunwale. When not in use, the easy-knot trolley ring snaps into the base of the LeverLoc™, quietly secured until deployed. Includes 35’ of USA made 550 paracord with a highly reflective tracer. This model features the HD option, which gets you two extra PadHooks plus backing plates for the pulleys and LeverLoc™, enabling a heavy duty install when compared to the self-threading screws included in the standard kit. Features YakAttack Stealth Pulleys for super smooth operation. The use of a YakAttack Rigging Bullet, RB1032, is highly recommend for installs where the install location is out of arms reach. Easy installation New YakAttack Stealth Pulleys 35' of highly reflective USA-made 550 paracord Includes all necessary hardware for installation Heavy duty Includes backing plates and extra Padhooks not included in AMS-1003. Made in the USA Covered by our Built for Life Guarantee SKU: AMS-1004

No more ball mounts, no more slipping or rotating in the track. Designed to replace the factory base on Lowrance fishfinders, the Lowrance Fishfinder Mount is a simple, clean, and highly effective solution for mounting your fishfinder. Attaches to track using our new LockNLoad™ mounting system for maximum versatility. This mount fits the popular Lowrance Elite, Hook, and Elite Ti models of fishfinders. The LockNLoad track mount is compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Patent pending. Fish finder not included. COMPATIBLE WITH Lowrance Elite 3, 4, 5 Lowrance Hook 3, 4, 5 Lowrance Elite ti 3, 4, 5, 7 Simrad G05 GearTrac not included Made in the USA Covered by our Built for Life Guarantee Patent Pending SKU: FFP-1002