Kayak Catalog

The Angler Classic gives you all the bells and whistles that our high-end fishing paddles do, at a price any kayak fisherman can afford. The rugged fiberglass-reinforced nylon blades are propelled by a durable fiberglass shaft, giving you the push you need without worrying about durability. Check the length of your catch with the dual tape measure on the shaft (in both inches and centimeters), and get those pesky hooks free again with the hook retrieval system built right into the blade. To customize your angling experience, the Bending Branches Angler Classic is available with either orange or sage green blades. The Angler Classic Plus comes with a versatile telescoping ferrule allowing for infinite feathering angles. If you have multiple boats or an adjustable seat (or if you can’t keep your Angler Classic out of other paddlers’ hands), the telescoping ferrule makes changing the paddle's length a breeze. The Angler Classic Plus is available in adjustable lengths of 230-245cm and 240-255cm. For more info, see https://bendingbranches.com/kayak-paddles/fishing/angler-classic/plus

Add a whole new level of versatility to your kayak, canoe, power boat, ATV, ORV, tractor, or other vehicle with the GT175 Generation II GearTrac™ from YakAttack! This heavy duty surface mount track provides a platform that's not only adjustable, but fully configurable, enabling unparalleled versatility for accessory mounting! Includes #10 blunt tip stainless steel thread forming screws. Install with the optional FullBack™ backing plate for ultra duty security. The GT175 Generation II GearTrac™ is a true surface mount and doesn't require Inside access for instillation. Designed for harsh marine environments Compatible with 1/2" wide track hardware Topside installation, no backside access required U.S. Pat. No. 9,671,060 B1 Made in the USA Covered by our Built for Life Guarantee

The Classic Fox 40 Safety Whistle is the original and still the standard choice for rescue professionals. Sometimes you have to be heard to be rescued. The 3-chamber pealess design has no moving parts to freeze, jam or deteriorate. Easy to blow and cannot be overblown. The harder you blow, the louder the sound. Chambers are designed to self-clear when submerged in water. Sound will be heard up to a mile away. A whistle is vital for signalling above the sound of surf and whitewater. Remember, in most on-the-water situations a sounding device like a whistle is required by the Coast Guard. We recommend against attaching the whistle to the zipper pull on your life jacket. That can result in accidental unzipping.

The GridLoc Belt Loop Adapter is a quick and easy way to keep your tools, knives, or small carry pistol within reach while on the water. Compatible with the GridLoc Hole Pattern found on the BlackPak Pro and ShortStak, this product can be mounted on the inside, outside, or under the lid, and gives you 2.25" of usable space to hang your tools. Includes stainless steel mounting hardware. Made from marine grade polymers. GridLoc compatible Includes one (1) adapter and the stainless hardware Compatible with most belt clips and pocket clips Attachment for knives, tools, and small handguns that feature a pocket clip or belt loop.

Tri Fold Rivet, 10 pack, .187 diameter, .157 - .472 grip. Aluminum, Black. These high quality aluminum rivets provide a quick and secure connection for installing accessories. Use in conjunction with a marine sealant for a waterproof connection. These rivets do not include a rubber o-ring which can dry rot and break down.

Super strong backing plate is used inside the hull for ultra duty attachment of the GT175 GearTrac. Provides backing support that is superior in strength to standard self threading screw installation, and provides significantly more surface area contact than nuts and washers. One GT175 Backing Plate covers 4" of GT175 GearTrac. Sold in a single pack. Works with the classic GT175, Top Loading GT175, and the GT175 Gen II GearTrac.

Yakclips™ for ease and comfort. This little beauty clips right to the combing of your kayak cockpit rim and your paddle clips into it freeing your hands to grab a drink or to set the hook on the big one. - Place the Yakclip on the front of your kayak combing with the paddle clipped in when getting in and out of your kayak to stabilize your entry or exit. - Move the Yakclip with your paddle out of the way to the side of the cockpit to reel in that big fish! - Yakclips will not clip on your kayak while wearing a sprayskirt.

This deep dish CatchNRelease™ Drip Ring features a unique design which catches water coming off the paddle blade in the high position, and releases it back into the water during your downstroke. We think this is the driest drip ring on the market. Soft and supple, the CatchNRelease Drip Ring is designed to fit all common sized paddle shafts including Werner, Bending Branches, and other popular brands of kayak paddles. Sold in a two pack Fits standard diameter kayak paddles Made in the USA Built for Life Guarantee SKU: YEP-1001

The YakAttack OmniHooks™ are a universal add-on to any kayak featuring a bungee system in the stern tankwell. Once attached to bungee, the OmniHooks™ allow you to lash down your YakAttack BlackPak™, bucket, cooler, or milk crate. The OmniHooks are specially designed for the YakAttack BlackPak, fitting in the t-slots featured on each corner of the top rails. Made in the USA and constructed from marine-grade polymers. Sold in a four pack.

In most states it's required to attach a red flag to anything that extends a few feet past the bumper of your vehicle - including kayaks. Our tow flag allows you to easily fulfill state requirements for motor vehicles while showing you're a loyal YakAttack customer.

The 1" YakAttack Ball Connector is 2.5" long and is designed to work with the 1" YakAttack Screwball or camera ball. Made from high strength composites and built for harsh marine environments. 1" Ball Connector 2.5" overall length Lifetime warranty Compatible with YakAttack 1" ScrewBall and camera ball Made in the USA Covered by our Built for Life Guarantee

35 feet of 7 strand USA made 550 paracord. The paracord is black/orange and features a highly reflective silver tracer for increased low light visibility. Great for use with kayak anchor trolleys, survival bracelets, and much more.

YakAttack’s LockNLoad™ mounting system, is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad™ track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt™, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit.

The MightyMount II is a low profile, highly versatile mount with a small footprint and the same hole pattern as the original MightyMount. Used for attaching accessories requiring a single t-bolt attachment point or YakAttack products that feature the LockNLoad™ mounting system like rod holders, fish finders, and more.

The YakAttack ScrewBall™ is a 1" ball mount that is compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).. Featuring a rubber washer on the underside to allow compression and help keep the Screwball locked in place while in the track. Designed for harsh marine environments and made in the USA. Track mounted 1" ball Lifetime warranty MightyBolt mount compatible with most kayak track systems Made in the USA Covered by our Built for Life Guarantee

Our Snagless Slotted Padeyes were designed from the ground up with paddle sports and kayak fishing in the forefront of our design process. The low profile, contoured design of the Snagless Slotted Padeye looks great and has no snag points. The slotted design accommodates popular padeye hole patterns of 1-3/8" and 1-1/16". Unlike the original padeye which sits very high and is prone to break the low profile geometry and material makes for a more kayak friendly design. Easily attaches with the included stainless self-threading screws.

This soft rubber scupper plug is designed to fit circular scuppers in your sit-on-top kayak. The conical shape and hollow design allow for the rubber construction to accommodate scupper holes. The rigid center core gives you a nice place to push the plug in place and the pull tab makes for easy removal.

The world-famous NRS cam strap, only smaller. The NRS 5/8" Micro Straps are perfect for securing smaller items to your boat or board or any of the 867 #StrapHacks that would benefit from a narrower strap. Product details: - UV-protected polypropylene webbing won’t stretch when wet. - Custom cam buckle features dual stainless-steel springs for a strong, even bite that won’t slip, ever. - Strap length is etched into the buckle to eliminate guesswork. - A woven name tag near the buckle lets you reclaim your straps from friends who borrow but don’t return.

1/4-20 track nut. Compatible with YakAttack MightyMount’s, GearTrac and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack and a six pack.

The GridLoc MightyMount XL was designed as a robust but economical mount for longer footprint areas. Compatible with all YakAttack track-mounted accessories, this injection molded mount functions similar to a GearTrac, and allows t-bolt accessories to be installed from either end. A simple twist allows quick and easy position adjustment, but a few extra turns are required to remove the accessory, giving the GridLoc MightyMount XL the same gear security features of the original YakAttack MightyMount, with all of the adjustability of our GearTrac. For LockNLoad accessories like the popular Omega or Zooka II Rod Holder, cutouts on the outer edges of the GridLoc MightyMount XL were added to accommodate the TrackTeeth located on the underside of the LockNLoad track mounts to prevent attachments from sliding along the track, adding even more security. The GridLoc MightyMount XL was designed around the GridLoc Mounting platform featured on the BlackPak Pro and replaces the MightyMount XL. The overall lengths will be the same as the original MightyMount XL; 6”, 9”, 12”, but the hole pattern has been updated and is different. The hole spacing on the GridLoc MightyMount XL is 1.5” x 1.5”. A Phillips screwdriver and the included stainless steel screws are required for the installation on the BlackPak Pro. For installations on rotomolded and thermoformed kayaks a 1/8” drill bit will also be needed.

The Lopro WingKnob was engineered with the kayak angler in mind. With the unique wing nut/knob hybrid it creates an easy to grasp yet comfortable knob in both cold and wet conditions. When designing the Lopro WingKnob we wanted an effective yet simple design that eliminated the chance of creating a snag for your fishing line or fly line.

Born on the river, ready for whatever. First sold in 1978 as a better way to tie down gear and frames on whitewater rafts, the NRS 1" Heavy Duty Strap is known the world over for its incredible strength and versatility. The ultimate DIY tie-down solution, every boater, outdoorsperson and homeowner should own an assortment of sizes. Unlike clunky ratchet straps and cheap imitations the NRS Strap is strong, easy, fast and simple with unlimited usefulness. UV-protected polypropylene webbing won't stretch when wet and delivers an impressive Minimum Breaking Strength (MBS) of 1,500 lbs. Custom cam buckle features dual stainless-steel springs for a strong, even bite that won't slip, ever. The strap size is prominently indicated on the buckle so there's never any guesswork. Iconic Blue straps keep with the traditional design with the strap size woven into the webbing. A woven name tag near the buckle lets you reclaim your straps from friends who borrow but don't return. Hidden bottle opener on the buckle aids one of the most popular "strap hacks." All sizes sold in pairs.

YakAttack Roll-Top Dry Bag – Waterproof Storage for All Your Outdoor Adventures. Keep Your Gear Dry with YakAttack Dry Bags – Available in 5L, 10L, and 20L Sizes. Prepare for your next outdoor adventure with the YakAttack Dry Bag, designed to keep your essentials safe, dry, and organized. Whether you're kayaking, boating, fishing, or camping, this waterproof dry bag ensures your gear stays dry — even in the toughest conditions. Key Features of the YakAttack Roll-Top Dry Bag 500D Waterproof PVC Construction: Built for maximum durability and water resistance, this dry bag ensures your gear stays dry even in the wettest conditions. Integrated Air Valve: Easily evacuate trapped air and create a more compact dry bag for storage. Need added buoyancy? The air valve lets you inflate the dry bag, ensuring your gear floats when needed. Clear Viewing Panel: The transparent panel lets you see what's inside without having to unpack everything, so you can grab the gear you need quickly. Roll-Top Closure with Soft PVC Collar: Not all dry bags are created equal. The YakAttack Dry Bag features a soft PVC collar around the roll-top closure, enhancing the seal for superior water protection. Removable Shoulder Strap for Easy Carrying: Whether you're hiking, kayaking, or fishing, the removable shoulder strap provides a convenient and comfortable way to carry your dry bag. Versatile Attachment Points: With integrated D-rings on the top and bottom, the YakAttack Dry Bag can be easily secured to your kayak, boat, or backpack. Available in Multiple Sizes for Every Adventure — making it perfect for everything from short day trips to extended outdoor expeditions. 5L Dry Bag: Perfect for short outings or as a personal storage bag for small essentials. Store your phone, wallet, keys, GoPro batteries, or a lightweight jacket. Ideal for day hikes, short kayaking trips, or fishing excursions. 10L Dry Bag: The ideal size for day trips. Store an extra layer, camera, snacks, and small accessories for a full day on the water or trail. Whether you're paddleboarding, kayaking, or fishing, the 10L is a reliable companion for your adventure. 20L Dry Bag: Perfect for multi-day adventures or camping trips. Keep your clothes, first-aid kit, and extra gear dry and organized. Whether you're boating, kayaking, or trekking, the 20L size gives you plenty of room for your essentials. Specifications: Material: 500D Waterproof PVC Sizes Available: 5L, 10L, 20L, 30L Closure: Roll-top PVC soft collar with buckle Additional Features: Clear viewing panel, integrated D-rings, removable shoulder strap, external air valve Capacity: 5L Dimensions: 7" x 15" x 7" Weight: 0.53 lbs SKU: SBA-1001 UPC: 819731017078 Made in China

Six stainless steel Yakattack MightyBolts™ with 1/2" wide head. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Six stainless steel MightyBolts™ Available with 1", 1 1/2", or 2'' Long Stud 1/2" Wide Head 1/4-20 Threading Made in the USA Covered by our Built for Life Guarantee SKU: MB20-12-6

The YakAttack MultiMount Cup Holder quickly and easily attaches to most kayak track systems. Designed for maximum versatility, the MultiMount Cup Holder accepts anything from stainless steel tumblers to Nalgene® Bottles to 12 oz cans and water bottles. Not thirsty? The MultiMount Cup Holder also makes a great place to put small tools and other items! Made in the USA from premium materials for a lifetime of use in even the harshest environments. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Patent Pending Made in the USA Covered by our Built for Life Guarantee SKU: SSO-1001

Voted Product of the Year for Yak Angler's Kayak Anglers Choice Awards for 2016. The YakAttack RotoGrip™ Paddle Holder sheds a new light on the age old problem of paddle management. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Kayak and SUP anglers have lots of options for installing and configuring this handy little gadget. Super low profile at 2.25" tall, the RotoGrip™ Paddle Holder grips the paddle shaft between two soft rollers, securing your paddle quietly and with just the right amount of tension. Sold in single packs. Utilizes the Mighty Bolt to attach to kayak track 2.25" tall GearTrac not included Single pack Patent Pending Made in the USA Covered by our Built for Life Guarantee SKU: GRP-1001

These 2mm all-purpose watershoes are the perfect solution when you need more than a sandal but less than a waterproof boot. These Seaboard watershoes provide foot protection while boating, walking around the dock, after swimming or anywhere around water where traction and full foot coverage are a must or preferred. FEATURES Grippy PVC-free Octo-Sole provides excellent traction on wet surfaces Super soft 5mm EVA insole for lasting comfort Toe and heel bumpers for added protection on rocky shorelines Breathable and fast drying toe-zone Pull loop at heel allows for quick and easy entry Lightweight and compressible for easy packing Non-marking soles

As the industry leader in track systems and track mounted accessories, we knew we needed a track mounted cleat, and the GT Cleat™ is our simple and highly effective answer.Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). The GT Cleat makes for a perfect companion to our highly popular LeverLoc™ Anchor Trolley and is a low profile, easy to attach and adjust anchor line cleat. The underside of the cleat features two tabs and a rubber washer helping keep the cleat from rotating and sliding in the track from anchor line tension. Attaches to all YakAttack GearTrac, MightyMount XL, and most other kayak track Made in the USA Made from premium materials designed for use in harsh marine environments Compatible with up to 3/8” line Made in the USA Covered by our Built for Life Guarantee SKU: AMS-1012

The YakAttack Cam Straps are an essential for any kayak angler. The high-quality polyester webbing has a higher break strength, superior resistance to abrasion, less stretch, better UV resistance, and increased water resistance compared to common polypropylene straps sold by most companies. The custom rubber buckle cover helps prevent dents and scratches while car topping. Sold in a 2 pack 6 ft. long 1 inch wide webbing Made with high-quality polyester webbing Custom rubber buckle cover Buckle and webbing are made in China Buckle cover and sewing are done in the USA SKU: YEP-1006-06-2PK 9 ft. long 1 inch wide webbing Made with high-quality polyester webbing Custom rubber buckle cover Buckle and webbing are made in China Buckle cover and sewing are done in the USA SKU: YEP-1006-09-2PK

The MightyMount II is a low profile, highly versatile mount with a small footprint and the same hole pattern as the original MightyMount. Used for attaching accessories requiring a single t-bolt attachment point or YakAttack products that feature the LockNLoad™ mounting system like rod holders, fish finders, and more. For heavy-duty installations or to eliminate the need for nuts and washers, use the YakAttack FullBack backing plate.