Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Kayak Catalog

$159.95
The Backwater Assassin Carbon Fiber Hybrid Paddle is the full-size version of its legendary predecessor, the Assault Hand Paddle. Weighing right at 38 ounces and 42 ounces, respectively, paddle design and technology is again moving forward! The Assassin is available in 2 different adjustable lengths: 230-240cm (90.5-94.5in) & 250-260cm (98.5-102.5). The Assassin kayak paddles not only display the patented “hook and teeth” blade design and raised graphics package, they also provide unsurpassed performance and versatility. The hook is great for grabbing a line in the water, pulling in decoys, pulling you closer to the dock, or making a tree limb easier to reach. The oversized blade helps to pull a lot of water when paddling and makes turning even easier. The Assassin is designed for form as well as function. The unique blade design allows kayakers more freedom, more comfort and more confidence to challenge themselves. The Assassin was designed for both high angle and low angle paddlers. The shaft is made of a carbon hybrid material to help reduce the overall weight and the oversized ABS injected nylon blade is hard enough to push off on any surface and not crack or flex. Is your lure stuck in a tree? No problem, just grab the branch. Too close to the rocks or oyster shells? No problem, just give a push. Available in 230-240cm or 250-260cm adjustable lengths ABS injected nylon blade Hook feature to grab your line, waterfowl decoy, dock, or tree limb Serrated teeth edge can be used to launch yourself off solid surfaces Made of strong, fade resistant plastic Drip rings included Available only in a black shaft and black blade For added length, consider the 35cm Carbon Fiber Paddle Extension
Add a whole new level of versatility to your kayak, canoe, power boat, ATV, ORV, tractor, or other vehicle with the GT175 Generation II GearTrac™ from YakAttack! This heavy duty surface mount track provides a platform that's not only adjustable, but fully configurable, enabling unparalleled versatility for accessory mounting! Includes #10 blunt tip stainless steel thread forming screws. Install with the optional FullBack™ backing plate for ultra duty security. The GT175 Generation II GearTrac™ is a true surface mount and doesn't require Inside access for instillation. Designed for harsh marine environments Compatible with 1/2" wide track hardware Topside installation, no backside access required U.S. Pat. No. 9,671,060 B1 Made in the USA Covered by our Built for Life Guarantee
$9.00 $11.95 25% Off
The Yak Attack MightyMount Kit allows you to easily attach your VisiCarbon Pro anywhere on your yak, taking up a minimal footprint. The Yak Attack MightyMount Kit includes all necessary hardware. Mounting hardware included Allows you to easily attach your VisiCarbon Pro anywhere on your yak, taking up a minimal footprint Small footprint - 2 in x 2 3/8 in x 1/2 in.
$12.00
The 1" YakAttack Ball Connector is 2.5" long and is designed to work with the 1" YakAttack Screwball or camera ball. Made from high strength composites and built for harsh marine environments. 1" Ball Connector 2.5" overall length Lifetime warranty Compatible with YakAttack 1" ScrewBall and camera ball Made in the USA Covered by our Built for Life Guarantee
$12.00
The YakAttack ScrewBall™ is a 1" ball mount that is compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6).. Featuring a rubber washer on the underside to allow compression and help keep the Screwball locked in place while in the track. Designed for harsh marine environments and made in the USA. Track mounted 1" ball Lifetime warranty MightyBolt mount compatible with most kayak track systems Made in the USA Covered by our Built for Life Guarantee
$12.00
This soft rubber scupper plug is designed to fit circular scuppers in your sit-on-top kayak. The conical shape and hollow design allow for the rubber construction to accommodate scupper holes. The rigid center core gives you a nice place to push the plug in place and the pull tab makes for easy removal.
$13.00 - $17.00
The GridLoc MightyMount XL was designed as a robust but economical mount for longer footprint areas. Compatible with all YakAttack track-mounted accessories, this injection molded mount functions similar to a GearTrac, and allows t-bolt accessories to be installed from either end. A simple twist allows quick and easy position adjustment, but a few extra turns are required to remove the accessory, giving the GridLoc MightyMount XL the same gear security features of the original YakAttack MightyMount, with all of the adjustability of our GearTrac. For LockNLoad accessories like the popular Omega or Zooka II Rod Holder, cutouts on the outer edges of the GridLoc MightyMount XL were added to accommodate the TrackTeeth located on the underside of the LockNLoad track mounts to prevent attachments from sliding along the track, adding even more security. The GridLoc MightyMount XL was designed around the GridLoc Mounting platform featured on the BlackPak Pro and replaces the MightyMount XL. The overall lengths will be the same as the original MightyMount XL; 6”, 9”, 12”, but the hole pattern has been updated and is different. The hole spacing on the GridLoc MightyMount XL is 1.5” x 1.5”. A Phillips screwdriver and the included stainless steel screws are required for the installation on the BlackPak Pro. For installations on rotomolded and thermoformed kayaks a 1/8” drill bit will also be needed.
$15.00
The YakAttack MultiMount Cup Holder quickly and easily attaches to most kayak track systems. Designed for maximum versatility, the MultiMount Cup Holder accepts anything from stainless steel tumblers to Nalgene® Bottles to 12 oz cans and water bottles. Not thirsty? The MultiMount Cup Holder also makes a great place to put small tools and other items! Made in the USA from premium materials for a lifetime of use in even the harshest environments. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Patent Pending Made in the USA Covered by our Built for Life Guarantee SKU: SSO-1001
$17.00
Voted Product of the Year for Yak Angler's Kayak Anglers Choice Awards for 2016. The YakAttack RotoGrip™ Paddle Holder sheds a new light on the age old problem of paddle management. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Kayak and SUP anglers have lots of options for installing and configuring this handy little gadget. Super low profile at 2.25" tall, the RotoGrip™ Paddle Holder grips the paddle shaft between two soft rollers, securing your paddle quietly and with just the right amount of tension. Sold in single packs. Utilizes the Mighty Bolt to attach to kayak track 2.25" tall GearTrac not included Single pack Patent Pending Made in the USA Covered by our Built for Life Guarantee SKU: GRP-1001
$17.00
These tie-downs come with a Mighty Bolt base. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Perfect as an anchoring point to secure a cooler or other accessory, as well as being a great adjustment point for directing steering cables on the deck of your kayak. Sold in a two-pack. Patent Pending 2 Pack Made of stainless steel Compatible with GearTrac, MightyMounts, and most other factory-installed track systems Made in the USA Covered by our Built for Life Guarantee SKU: AAP-1016
$20.00
You’re not alone. When you bought your boat, you were excited about the built-in tracks and the promise of versatility they offered, only to find that there just aren’t many compatible accessories out there, and many of the ones that are available are just not what you’re looking for. The larger and heavier-duty version to our original GT Cleat, the GT Cleat XL™ is our simple and highly effective answer to the issue of line management. Best paired with 1/2" rope, this version of the GT Cleat features the new TurnKey™ adapter, our new solution for aluminum boats featuring built-in track on the gunwale. This nifty little gadget is low profile, easy to attach and adjust, and made in the USA. Compatible with a wide variety of boat brands featuring a built-in track on the gunwale including the following: Ranger Boats Lock-track Crestliner SureMount and Lock Track G3 Boats Lund Boats SportTrak Xpress Boats War Eagle Boats - 45 degree T-Lock/Cap Rail Lowe Boats Duracraft Boats - 45 degree T-Lock/Cap Rail Triton Boats Lock-track Tracker Boats Versatrack Excel Boats Product Info: Features TurnKey™ track adaption technology Patent Pending Meant for medium-duty applications Made in the USA Covered by our Built for Life Guarantee SKU: MTA-1004
$20.00
The United States of America is where the kayak fishing craze started, and we're proud of that! Our "Fish the USA" tee is a great way to show you are too. 65% polyester/35% ring-spun USA cotton Heat-set fabric to minimize shrinkage
$20.00
One of the most significant opportunities for customizing the new BlackPak Pro is found on the inside. When designing the BlackPak Pro and the GridLoc Mounting Platform, we incorporated internal screw bosses for future accessories to customize your BlackPak Pro more effectively from the inside out. The first interior accessory is our KnotLoc Bungee Dividers. This kit includes a total of six bungee dividers creating the ability to secure seven 3700 Plano tackle boxes in the 16x16 BlackPak Pro and is also compatible with all sizes of the BlackPak Pro. The KnotLoc attachment tabs attach using a stainless screw. To attach the bungee dividers, simply tie an overhand knot in the bungee and slide it through the hole in the bungee tab. The knot locks in place on the backside of the attachment tab and can also be removed in seconds, so you can quickly and easily add or remove the bungee dividers depending on your needs for an upcoming fishing trip. Once installed, the bungee tabs can be rotated to the left or right of the mounting location, helping you dial in the exact position of the bungee to accommodate tackle boxes of varying thicknesses better. Compatible with all BlackPak Pro sizes Includes components for six dividers Includes stainless steel hardware Phillips screwdriver required for installation Built for use in harsh marine conditions Made in the USA Built for Life Guarantee
$20.00
The YakAttack Stealth Pulley is engineered to be the most quiet, low profile, shielded, and snag free pulley ever created for kayaks. Designed for use with anchor trolleys but great for many other applications. Teflon infused, wear resistant nylon rollers offer quiet, smooth operation and extreme durability for a lifetime of use. The shielded, snag-proof housing protects the rollers from docks, stumps, and other obstacles you may encounter on the water. 2 Pack Hardware Included Features same hole pattern as Hobie and Harken pulleys Made in the USA Covered by our Built for Life Guarantee
$20.00
The YakAttack Track Mount Vertical Tie Downs come with a Mighty Bolt base. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Perfect as an anchoring point to secure a cooler or any other accessory to the track. Designed to work with 1'' and 1.5'' flat webbing and can also be used with bungee. Made in the USA from premium materials for a lifetime of use in even the harshest environments. Sold in a 2 pack. Patent Pending Made in the USA Covered by our Built for Life Guarantee SKU: AAP-1025
$22.00
The YakAttack BlackPak™ Trucker Hat features a medium high profile with the YakAttack and BlackPak™ logo. Whether you are on the water or out on the town with your friends or family the YakAttack BlackPak™ Trucker Hat will be sure to let everyone know that your are a die hard kayak angler. The unique elastic/Velcro closure makes for a great fitting cap and also helps maintain a snug fit so your hat won't blow off your head during high winds.
$22.00
The Black YakAttack Trucker Hat features a medium high profile with the YakAttack logo and a sleek, every day look. The mesh back helps keep you cool during warm summer days. The unique elastic/Velcro closure makes for a great fitting cap and also helps maintain a snug fit so your hat won't blow off your head during high winds.
$25.00
After years of using the standard rod tube on the YakAttack BlackPak, we knew it was time to add our YakAttack flair and design a product that was worthy of the YakAttack name. The TetherTube was modeled after our popular AR Tube Rod Holder and works flawlessly with spinning and casting rods. The angled lead-in at the top of the TetherTube makes it a breeze to insert your rods and helps lock in your casting and spinning reels keeping them aligned and ready. For added security, the integrated but easily removable hook and tether systems ensure your rods stay put if things go wrong. Caged attachment points on both sides of the tube offer multiple hook points, and the oversized hook design is sized to attach directly to the shaft of your fishing rod if desired. The Tether Tube is compatible with the BlackPak Pro but will not work with the classic BlackPak. Made from marine grade polymers, the Tether Tube is built to last and comes with our Built for Life Guarantee. The included hardware kit allows for installs on the BlackPak Pro or applications where a nut and washer are needed. Sold as a two pack Includes the integrated hook and tether Compatible with spinning and casting rods Hardware included Only compatible with the BlackPak Pro, not the classic BlackPak Made from marine grade polymers Made in the USA Covered by our Built for Life Guarantee
$32.00
The Omega Rod Holder attaches to your kayak, boat, or other watercraft with YakAttack’s brand new LockNLoad mounting system, and is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use: - From locked mode, simply squeeze a lever to go into adjustment mode. - In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you back in locked mode. - To go to removal mode, flip the lever out, and the system easily slides off of the track mount. Made in the USA Covered by our Built for Life Guarantee Patent Pending SKU: RHM-1001
$35.00
In typical YakAttack fashion, what started as an idea for a single offset RotoGrip Paddle Holder resulted in a product with a bit more versatility. The DoubleHeader track mount can serve several different purposes, but in this case, it is the foundation for the perfect offset paddle holder solution that our customers have been dreaming of ever since the launch of the RotoGrip several years back. Compatible with standard diameter kayak paddles the RotoGrip Paddle Holder has become the most widely used paddle holder in the industry. The RotoGrip is a simple yet highly effective paddle holder solution, but many paddlers wanted to use one or two RotoGrips on a single side of the kayak. When using two RotoGrips on a single piece of track, you get a nice tight hold, but you also cover up the entire length of the track with your paddle, rendering open track space useless. The DoubleHeader in this configuration eliminates that problem entirely and offsets the paddle holders off the kayak allowing for the full functionality of the remaining track space for other accessories. If you are tight on track space, the DoubleHeader includes an additional feature to add LockNLoad accessories like YakAttack rod holders, camera mounts, and more. Simply replace the stock knob from the DoubleHeader with the LockNLoad base of a rod holder or other accessories, and you are able to have multiple attachments on a short section of track or a single point of attachment like a MightyMount II. The DoubleHeader track mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track. Included with the DoubleHeader are two different Track Disk. These two Track Disks are designed to provide a snug fit in either the standard YakAttack GearTrac (GT90, GTSL90, GT175, MightyMount XL) or the wider opening of the YakAttack Top Loading family of GearTrac (GTTL90 and GTTL175). If a track system came included with your kayak, try both of them and determine which one will provide the best fit. For added paddle security, included with the DoubleHeader and RotoGrip’s are two SnapNStrap Security Tethers. To secure your paddle unhook the bungee tab from the stored position on the base of the DoubleHeader, wrap it around the shaft of your paddle, and loop it over the tab on the outward side of the RotoGrip. This feature will come in handy for kayakers using pedal drive kayaks like a Hobie or motors like a Torqeedo or MotorGuide. In those situations, a paddle might not be needed all the time, so the security tethers provide extra peace of mind knowing your paddle is safe and sound. If you need quick access to your paddle at a moment's notice, the tethers have a stored position, so they do not get in the way when inserting or removing your paddle from the dual RotoGrips. The DoubleHeader with Dual RotoGrip Paddle Holders is made in the USA from marine grade polymers and is backed by our Built for Life Guarantee. Made in the USA Built for Life Guarantee Single point of attachment LockNLoad Compatible Includes two RotoGrip Paddle Holders Includes two SnapNStrap Security Tethers Includes two sizes of Track Disks Perfect for anglers with pedal kayaks or motors Compatible with standard diameter kayak paddles DoubleHeader is 8.25” wide The DoubleHeader track mount is compatible with YakAttack GearTrac, MightMount XL, MightyMount Switch, MightyMount II, and most other factory installed kayak track.
$35.00
Secure your kayak fishing gear without bulky leashes or floats using the YakAttack Track Mount Retractor. This super versatile unit combines the innovation you've come to expect from YakAttack and genuine T-Reign retracting mechanism, 36" Kevlar cord, and a removable 4" tether. Designed for track mounting, this kit comes complete with everything you need, and is compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). GearTrac not included. UV Resistant High Density Polyethylene 36" Kevlar Cord Removable 4" tether Patent Pending Made in the USA Covered by our Built for Life Guarantee SKU: RET-1002
$40.00
This is a truly universal solution that works flawlessly with spinning, casting, larger conventional reels, and yes – even fly rods of all sizes. A 360 degree rotating collar offers the ability to quickly secure the rod by capturing the reel, and allows spinning reels to be stowed in the natural downward position, not hung off the side. Multiple modes allow anglers to easily stage rods for quick access or lock them in for maximum security. The Omega Pro adds an extension arm to help get your reel higher off the water or helps accommodate longer rod butts. The Omega Pro attaches to your kayak, boat, or other watercraft with YakAttack’s brand new LockNLoad mounting system, and is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use: - From locked mode, simply squeeze a lever to go into adjustment mode. - In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you are back in locked mode. - To go to removal mode, flip the lever out, and the system easily slides off of the track mount. This piece of mechanical brilliance is sure to make the LockNLoad the preferred mounting system of kayak anglers for 2018. GearTrac not included Made in the USA Covered by our Built for Life Guarantee Patent Pending SKU: RHM-1002
$42.00
The YakAttack Advanced Rod Tube™, new for 2019, is our take on the classic tube-style rod holder designed for spinning and casting rods and reels. It features a gimbal lock that flips into place to accommodate longer rods as well as multiple attachment points on the bottom side for rod leashes, increasing gear security. Made from marine grade polymers the AR Tube is built to last and comes with our Built for Life Guarantee. The AR Rod Tube is track-mount ready, and features the LockNLoad™ Mounting System. The LockNLoad system offers unrivaled track-mount security, but its also incredibly easy to adjust through its patented pending design. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). The AR Tube attaches to your kayak, boat, or other watercraft with YakAttack’s brand new LockNLoad mounting system, and is exactly what you would expect from the leader in track mounting technology. Offering unrivaled track mount security and adjustability, the patent pending LockNLoad track base is the most advanced track mount ever created. You want no slip? No problem. The LockNLoad track base attaches quickly and easily with a single MightyBolt, but will not accidentally rotate or loosen from the track, even when your trolling rod takes a big hit. There are 3 modes: locked, adjustment, and removal. The patent pending design is easy to use: - From locked mode, simply squeeze a lever to go into adjustment mode. - In adjustment mode, the mount can be rotated in any direction, but cannot be removed, ensuring the rod holder is completely secure while making adjustments, even if a fish hits. Let go of the lever and you are back in locked mode. - To go to removal mode, flip the lever out, and the system easily slides off of the track mount. This piece of mechanical brilliance is sure to make the LockNLoad the preferred mounting system of kayak anglers for 2018. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). GearTrac not included Made in the USA Covered by our Built for Life Guarantee Patent Pending SKU: RHM-1003
$45.00
The first anchor trolley designed specifically for the job, the YakAttack LeverLoc™ Anchor Trolley features a LeverLoc™ line clamp, which locks your trolley line in place with a simple “flip of a switch” motion. Keeping the trolley lines in line is the PadHook, a simple but clever design that combines the functionality of both a pad-eye and a hook, keeping even the tightest trolley lines in place on the side of the kayak, not over your gunwale. When not in use, the easy-knot trolley ring snaps into the base of the LeverLoc™, quietly secured until deployed. Includes 35’ of USA made 550 paracord with a highly reflective tracer. This model features the HD option, which gets you two extra PadHooks plus backing plates for the pulleys and LeverLoc™, enabling a heavy duty install when compared to the self-threading screws included in the standard kit. Features YakAttack Stealth Pulleys for super smooth operation. The use of a YakAttack Rigging Bullet, RB1032, is highly recommend for installs where the install location is out of arms reach. Easy installation New YakAttack Stealth Pulleys 35' of highly reflective USA-made 550 paracord Includes all necessary hardware for installation Heavy duty Includes backing plates and extra Padhooks not included in AMS-1003. Made in the USA Covered by our Built for Life Guarantee SKU: AMS-1004
$90.00
The revolutionary forearm grip featured on the Leverage Landing Net offers unparalleled stability and control, while the hinged design allows the handle to fold alongside the net for compact and easy stowage which make the Leverage Landing Net the best net when kayak fishing. The high level of control and accuracy offered by the forearm grip means you don't need a giant hoop to net your next big fish and makes the Leverage Landing Net an essential piece of kayak fishing gear. This Leverage Landing Net has a wider, more traditionally designed hoop. Revolutionary Forearm Grip Folds for Easy Storage Full Rubber Net Wider, more traditionally designed hoop 20" X 21" Hoop 47'' Overall Length Leverage Landing Net is a registered trademark of YakAttack, LLC Netting is molded in Taiwan All other components are made and assembled in the USA Covered by our Built for Life Guarantee SKU: LLN202148
$95.00
Designed to meet the needs of all anglers- from serious kayak fishermen to recreational paddlers- the VISICarbon Pro™exhibits unprecedented performance in light weight, low drag, and portability- all with plenty of style. The ultra-thin mast and instantly recognizable flag combine to offer excellent performance with low wind resistance, and enhances your visibility on the water, night and day. The VISICarbon Pro™ light is complete with an LED module, which will burn for 100 hours on 3 AA batteries (included) and provides 360° visibility. The Silent Snap flag attachment provides a secure fastening that can be left for hours, or removed in seconds. The collapsed unit fits inside the flag for easy organization, creating a convenient and portable storage solution at only 14" long. The deployed VISICarbon Pro™ is 48" long. The SilentSlip foam at the base of the unit floats, but still fits into most flush mount and tubular rod holders. Compatible with YakAttack MightyMount’s, GearTrac, and most other kayak track systems from Scotty Fishing Products, RAM Mounts, and YakGear. For FeelFree Kayaks, 3 Water Kayaks, and Jonny Boats you will need an adapter to be compatible. We offer the needed adapter in a single pack (AAP-1012) and a six pack (AAP-1012-6). Enhances your visibility day or night. SilentSlip foam fits most flush mount and tubular rod holders. 48" long deployed, 14" collapsed. Collapsed unit stores inside flag. It floats! Designed with carbon fiber tubing for stiffness and ultra light weight. Silent Snap flag attachment system provides quick and easy flag installation and removal. LEDs burn 100 hours on 3 AA batteries (included). 10,000+ hours lamp life. U.S. Pat. No. 8,662,720 Made in the USA Covered by our Built for Life Guarantee SKU: CPM
$250.00
Command the water with the YakAttack CommandStand™! Designed to fit most kayaks with or without a track system, the unique crossbar design allows you to adjust the width of the CommandStand™ for a perfect fit on most kayaks. Assembles with one hex key (included), but the pin-and-tether design means no tools are needed to deploy, lay down, or break down the CommandStand™ for stowing. More than just a stand-assist bar, the CommandStand™ offers all of the features of a standup fishing station! Two RotoGrip Paddle Holders mean your paddle is there when you need it and out of the way when you don’t. Two MightyMount Bar Clamps allow you to attach any YakAttack accessory utilizing a single t-bolt, including rod holders, cup holders, camera mounts and more. Pull 2 pins to lay down on the forward deck of your kayak, and pull 6 pins (4 at the base and 2 at the crossbar) to break the unit down to a tidy bundle, ready to stow in the mesh carrying bag (included). Made in the USA from premium materials for a lifetime of use in even the harshest environments. Anodized Aluminum UV Stable Polymers Coated and Uncoated Stainless Steel Hardware Adjustable Width Can be mounted to tracks or any flat surface All necessary hardware included Includes accessory kit 2 RotoGrip Paddle Holders 2 MightyMount Bar Clamps for attaching accessories Mesh carrying bag with shoulder strap Patent Pending Made in the USA Covered by our Built for Life Guarantee SKU: SAP-1001
$159.99
The Origin Glass Touring Paddle offers the ideal paddle shape for all-around touring. This paddle is designed to enhance stroke efficiency and boat control. It’s perfect for day trips as well as longer excursions. Paddlers can customize both the length of the shaft and the degree of feathering with the simple flip of the lower-profile lever. Adjustability also enables family members of different sizes to use the paddle comfortably. Adjustable Size – 220cm base length expandable up to 240cm Paddle Weight: 35 oz Works well with any touring kayak A strong and durable high-angle blade design delivers plenty of purchase to maximize boat control and propel even the heaviest kayaks Designed to deliver enhanced stroke efficiency and boat control Two-piece construction breaks down for easy transport and storage Suitable for day trips as well as longer, multi-day excursions Works well for beginners and more experienced paddlers With a simple flip of the low-profile lever, the Origin Touring paddle can be adjusted to fit virtually any paddler or seat position.
$199.99 $204.99 2% Off
The Kayak Krate sophisticates the tankwell storage experience with a superior functional interface and sleek look never before seen in a fishing gear storage crate. An open main compartment accommodates larger gear and tackle boxes, while smaller items can be stowed in the secondary lid storage. Functional and durable inside and out, the Kayak Krate is blow-molded, water resistant is easily lashed within a tankwell, and comes standard with four rod holders. Large main compartment Lid serves as additional storage Comes standard with four (4) rod holders Blow-molded for durability Water resistant when latched closed Universal lash down points No assembly required Comes with brackets to raise the position of the rod holders to accommodate narrow tankwells Weight = 10.9 lb Capacity = 29 L Height = 13.25” Width = 12.25” Depth = 18”
$199.99
Known for tournament-winning fishing kayaks, Wilderness System now offers premium paddles for anglers. The Origin Angler’s powerful blade is ideal for maneuvering larger sit-on-top fishing kayaks or covering ground quickly to reach remote spots and fish all day. Anglers who use different seat positions will appreciate the built-in adjustability (240cm to 260cm) and the ease of operating the Leverlock® adjustable ferrule. Paddlers can customize both the length of the shaft and the degree of feathering with the simple flip of the lower-profile lever. The Origin Angler paddle weighs 37 oz and comes complete with a line hook in the blade and an integrated 36” measuring tape on the paddle shaft. Adjustable Size – 240cm base length expandable up to 260cm A strong and durable high-angle blade design delivers plenty of purchase to propel even the heaviest sit-on-top fishing kayak Designed to deliver enhanced stroke efficiency and boat control Two-piece construction breaks down for easy transport and storage Suitable for day trips as well as longer, multi-day excursions With a simple flip of the low-profile lever, the Origin Angler paddle can be adjusted to fit virtually any paddler, type of fishing kayak, or seat position. Integrated line hook and 36” measuring tape on shaft Paddle Weight: 37 oz Works well with any fishing kayak
Page 1 of 6 Next page